Red RC » Brand

July 8, 2022

Hobbywing EZRun Mini28 speed controller

Hobbywing introduce their new EZRun Mini28 speed controller built specifically for 1/28 scale racing. The ESC is extremely small (22mm by 14mm) and lightweight at only 5 grams and the shape is designed for ease of soldering and reducing unnecessary tweak, an important factor for a 1/28th scale racing car. The fully-alloy heat sink ensures that the ESC can dissipate heat and operates at a healthy temperature range while the maximum output current can be up to 30A. The ESC has many adjustable parameters, including PWM frequency, brake frequency, softening, Boost, Turbo and much more. It is equipped with two usage modes, the Zero-Timing which is more commonly known as ‘blinky’ and the ‘modified’ mode which allows power-hungry users to increase additional turbo timing in the software. The ESC also has a built-in BEC which can support a maximum output current of up to 3.5A and the output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market. Simple and convenient, parameter settings, firmware upgrading and other operations can be established using Hobbywing’s OTA Bluetooth module and your mobile phone via the Hobbywing app.

View the underside of the Mini28 here

July 8, 2022

Power HD M8 & M8 Pro 1/12th pan car servo

Power HD have introduced their new 1/12th Pancar specific M8 and M8 Pro professional edition servos. Prior to release, many international drivers havd already used the servo in the 2022 EFRA European Championships 1/12 including Power HD team driver Michal Orlowski who took double TQ and win at the event. Both versions are the same apart from the mounting option. The direct mount design of the M8 Pro helps to lower the chassis’s centre of gravity, offering stronger precision and locking force resulting in smooth cornering. The servo weighs only 28.6g, even with the full aluminium casing. Coming with 25T stainless steel + 7075 aluminium gear set and the latest PCBA, the servos support various ultra-high-speed modes like SSR, SUR, SXR, SR and SFR. Both servos can work with Power HD programming box, to adjust the servos parameters.

View more details & images here

July 7, 2022

Infinity IF15 titanium ball screw set

For the Infinity IF15 and IF15W, Creation Model have produced this high-quality 64 titanium ball screw set. When replacing the car’s standard 8mm ball screws, the front of which are steel and the rear aluminium, they reduce the overall weight by approximately 3.3g and provide a light driving feel. Sold as a complete set for the front and rear and as a pair for either the front or the rear.

Source: Creation Model [creationmodel.net]

July 5, 2022

BMT 802GTX 1/8 GT chassis

BMT have announced their new 1/8 GT car, called the 802GTX. Following months of development, the Italian brand came up with an all new design to replace the 801GTX Pro. All is new starting with the main chassis, new geometry, steering assembly, central supports from aluminium and a lot more. This is an initial introduction so we will expect more details coming soon.

View more images of the 802GX here

July 5, 2022

Xtreme Racing DBXL 2.0 gas buggy servo mount

New from Xtreme Racing and designed to fit the Losi DBXL 2.0 gas buggy, this servo mount replaces the stock plastic mount. Made using 4mm thick carbon fibre deck, aluminium standoffs and custom machined plastic radio box, this kit is designed to use only one steering servo. The kit version also comes with a carbon battery tray designed for 2 cell ‘shorty’ hard packs.

View more images of the mount here

July 5, 2022

Sagami RC Fab A12 front lower arm

Sagami RC Fab has released a new front lower arm, with a shorter wheelbase, for the Awesomatix A12. By using this lower arm the wheelbase will be shortened by 6mm, the turning ability of the car will be improved and cornering will become more agile. By revising the shape and material, the rigidity is slightly lower than the genuine Awesomatix product, so the car can follow the road surface more flexibly. There are also holes for additional servo posts, which allows the rigidity of the suspension arm to be adjusted. Finally, as there are specific mounting holes for Sanwa and KO servos you can set the optimum Ackerman for each. Servos made by other manufacturers can also be installed using two long holes. When using a knuckle arm with zero-trail, the wheelbase will be 3mm shorter than standard, so the Ackerman will also change.

View an image of the arm set here

July 1, 2022

SMJ 60x45cm pit mat

SMJ have introduced their new pit mat. The perfect size (60x45cm) for an indoor circuit pit table, it is also just the right size for maintenance at home or in a hotel. Made of durable black neoprene and non-slip rubber on the back, it has just the right thickness and weight, and will not slip or shift.

Source: SMJ [infinity-rcshop.jp]

June 30, 2022

Mark Stiles joins Awesomatix️

Awesomatix have announced the addition of UK Pancar ace Mark Stiles to their Factory Team. The 10x EFRA 1/12 EC A-Finalist brings a wealth of experience and knowledge to the Team. Together with James Stewart and their UK distributor they aim to further extend and improve support for racers and Mark is a great addition to those future plans. Mark will attend all major events in the UK as well as the European & World Champs. Mark had this to about joining the team:

I’m excited to join Awesomatix and drive the A12 as part of a team being assembled in the UK. It is refreshing to see a manufacturer taking an innovative approach to chassis design in the 1/12 category and so far I have been impressed with the level of quality and precision in the car. As a team our aim is to compete at the sharp end of the club, national and international races we attend whilst sharing our collective passion and experience in a fun environment. We will work to develop the A12 platform whilst supporting other drivers using the car in the hope that competitors at all levels can enjoy racing it.

Source: Awesomatix [facebook.com]