Red RC » Brand

July 1, 2021

Axon BD10 & T4 lightweight double joint bushing set

Axon have released these new double jointed CVD parts for the Yokomo BD10 and Xray T4 for improved steering feel. The Axon lightweight double joint bushing is made from a highly precise aluminium and dramatically improves the performance of the double joint drive shafts. The clearance between the inner and outer cross shaft pins has been optimised for maximum drive efficiency and it is also very strong and durable, which dramatically improves the acceleration of the machine. The double joint cross shaft is made of high strength steel instead of aluminium for maximum precision, and the outer race is ultra precision polished. This part plays an important role in the connection between the outer and inner shafts of the drive shaft, so the high rigidity from the steel material provides the best traction. Completing the parts are machine cut cross shaft pins another key part of the drive shaft. All parts are to be used with manufacturer original shafts and axles.

Source: Axon [team-axon.com]

July 1, 2021

Exotek F1ultra caster setting tool

Exotek have introduced their new caster setting tool for their F1ultra chassis. Providing easy to read ‘pointers’ that tell you the caster degrees of the front steering knuckles when used with 1/10 TC type camber set up gauges as shown. Works with Hudy, Arrowmax, Integy and similar 1/10 TC set up stations.

View more images here

June 30, 2021

Muchmore Impact FD4 6000mAh 14.8v LiPo battery

Muchmore have announced that their new Impact Silicon Graphene FD4 6000mAh 14.8v 130C LiPo Battery is now ROAR Approved. This new 6000 4S LiPo battery was designed and tested by Muchmore factory driver Ryan Cavalieri to provide plenty of run-time for the 10-minutes A-Mains, while also improving the handling of his car with less overall weight & lower centre of gravity.

Source: Muchmore [muchmoreracing.net]

June 30, 2021

1up Racing Lockdown M4 wheel nuts

1up Racing now offer their new Lockdown M4 wheel nuts in 7 bold new colours. Vibrant anodising and a bright silver outer chamfer instantly improve the aesthetics of any car lucky enough to be rocking a set of these! Their low-profile serrations feature an oversized outer diameter and narrow inner diameter offering up to 200% more gripping surface area than basic wheel nuts, ensuring your wheels stay on lockdown.

Source: 1up Racing [1upracing.com]

June 30, 2021

MSE Performance Parts straight plate & tweak stick

The MSE Performance Parts straight plate is made to assemble all bulkheads aline to the chassis centre line. It connects not only left and right but also front and rear. It is easy to use even in between runs. It helps for a proper assembly and prevents any unusual behave of the car. It is recommended to use in combination with the tweak stick. The MSE Performance Parts Carbon Tweak Stick is made to pin the car down onto a flat surface with one hand, while tightening the upper deck screws with the other hand. This process will take out chassis tweak and prevents any unusual behave of the car. It is recommended to use in combination with the straight plate.

View more images of the parts here

June 30, 2021

T-Works carbon fibre wing button

T-Works have introduced this general purpose carbon fibre wing button. The 1-piece wing button is machined from high-quality carbon fibre and makes for easier wing mounting, improved looks and better wing support, especially when running lightweight polycarbonate wings. The buttons come has elongated holes to allow mounting on a multitude of mounts and comes supplied with the mounting hardware.

Source: T-Works [rc-tworks.com]

June 29, 2021

R1 Wurks low profile digital drive servo Gen2

R1 Wurks have released Gen2 of their low profile digital drive servo. With an input voltage of 4V to 8.4V it can be used across a multitude of platforms. Featuring a super smooth coreless motor and enhanced servo centring technology, this makes for a high speed and high torque servo (14kg at 6V / 17.5kg at 7.4V). Set inside a lightweight aluminium case with all metal gears, this version comes with a 80mm short wire for tidy installation.

Source: R1 Wurks [r1wurks.com]

June 28, 2021

T-Works touring car stand V2

T-Works have released V2 of their touring car stand. Made from machined aluminium, the black anodised legs sport edge chamfering and are attach to the main carbon top plate for a strong but lightweight stand. The top plate features holes for mounting shocks and gear diffs for rebuild and it comes supplied with foam strips to prevent your car from sliding off the stand and to stop the stand sliding off your bench.

View another image of the car stand