Red RC » Brand

July 21, 2020

Element RC Enduro24 Sendero RTR trail truck

Element RC have introduced their new Enduro24 Sendero ready-to-run trail truck. Whether it’s outside on the trail or in the comfort of the own living room, there’s no doubt this little rig will overcome the challenge. This small-scale, 4-wheel-drive crawler comes equipped with many features found on larger size rigs. Full-time 4-wheel-drive transmission with divorced transfer case, metal vertical chassis rails, and 4-link suspension ensure climbing over obstacles will be a breeze. Providing power and control is a 2-in-1 receiver/ESC, 2-channel radio, powerful servo, and single-cell LiPo. Just install the batteries, charge, and go. Right out of the box, the Enduro24 RTR is ready for adventure where front and rear injection-moulded 4-link suspension allows for smooth articulation to crawl over rough terrain. The chassis-mounted servo provides maximum steering while maintaining scale looks. Crawl, grip and climb over obstacles with black, injection-moulded single-piece rims wrapped in soft compound rubber tyres. The forward-mounted motor puts the heaviest part of the rig over the front tires. This forward-bias weight keeps the front tires on the ground and provides better front grip during ascents. The divorced transfer case provides a lower centre of gravity in a compact space. Not only does this combination perform well, it also adds scale realism, allowing for plenty of room should you want to add a custom body or interior.

View a list of the key features and more images here

July 20, 2020

Destiny RX-10 series suspension spacer sets

Coming from Destiny and made for their RX-10 series electric touring cars are new aluminium suspension spacer sets. Available in 0.5mm, 1.0mm and 1.5mm thicknesses, the spacers are of an open design, allowing for easy mounting and removal by simply loosening the suspension mount screws a couple of turns. The spacers are made of high-quality aluminium, they come black anodised and with laser-engraved size markings for easy identification.

View the other sets here

July 20, 2020

T-Works 22X-4 POM shock cap bushings

Coming from T-Works and made for the TLR 22X-4 are new POM shock cap bushings. The precision-made parts replace the standard bushings with the self-lubricating POM material improving suspension efficiency. The bushings come in sets of four and are also usable for other 22 series buggies and trucks.

Source: T-Works [rc-tworks.com]

July 20, 2020

Serpent SRX8T-e 1/8th scale E-truggy kit

Following the recent introduction of the Serpent SRX8T 1/8th scale nitro truggy kit, Serpent have announced the soon release of the electric-powered SRX8T-e. The kit will retain all of the nitro’s key factors such as performance, reliability, durability, ease of assembly as well as maintenance, coupled with an all-new suspension geometry. The truck is based on a new, narrow main chassis plate machined from 4mm 7075-T6 aluminium for a low weight and high rigidity. The universal aluminium motor mount is of a sturdy yet low-weight design with M4 screws allowing to crank it down for maximum reliability. The gearboxes are of a new 10T/46T design for an optimised final drive ratio which results in reduced rotating masses and faster acceleration. The internal differential gears are Mod 1.25 10T/20T offerings for durability and reduced fading during longer mains. The centre driveline is made up using an aluminium front centre and a steel rear centre driveshaft for the lowest possible weight yet exceptional durability as it can withstand even the most powerful motors. Also part of the package are 16mm big bore shock absorbers with X-ring seals and 3.5mm shock shafts while the included “Pro” shock caps allow to build the shock absorber in emulsion or bladder style for greater setup possibilities. The shock pistons are made of machined Delrin and they are of a 6-hole design. Other features include all-new monocoque suspension arms. They are longer, stronger and allow to use plastic or carbon fibre inserts in order to adjust their overall flex. Also part of the suspension package are ball-raced anti-roll bars, fully sealed outer driveshaft joints, a maintenance-friendly speed controller mount and receiver box as well as a versatile LiPo mount and hold down system that supports 4S block battery packs. Paintable mud guards, aluminium shock towers, aluminium 0 degree steering blocks and 15 degrees C-hubs as well as a fully adjustable steering Ackermann are also part of the extensive new features list. The kit is rounded out by plus 15mm super tough wing mount as well as a stylish new racing truck body shell. The kit should hit stores this week.

View more images here

July 19, 2020

T-Works S35-4 carbon fibre arm stiffeners

T-Works have introduced new carbon fibre suspension arm stiffeners for the SWorkz S35-4 buggy. Available are front upper arm, front lower arm as well rear lower arm inserts that reduce overall arm flex while preventing the built up of dirt. The stiffeners are available in 1mm and 1.2mm variants with the different thickness helping to further fine-tune the flex characteristics. Included with the sets comes suitable hardware.

View the other new sets here

July 17, 2020

Mon-Tech Racing Pick-Up M M-chassis body shell

Following the recent release of their all-new Pick-Up body shell for 1/10th scale 190mm electric touring cars, Mon-Tech Racing from Italy now also introduce a variant for the smaller MTC class. The 210mm wheelbase fun class M-chassis body offers cool retro looks, sculptured fenders and a large rear wing. It is moulded from high-quality 0.75mm polycarbonate, comes clear and including window masks, a decal sheet and wing mounting hardware.

View more images here

July 17, 2020

Picco EFRA 2166 off-road pipe set

Picco have introduced their new EFRA 2166 off-road exhaust set. It was developed to supply improved power and crisp acceleration, making it a favourite of Picco’s Renaud Savoya. Included in the set come a suitable manifold, silicone gaskets and mounting springs.

Source: Picco by Kyosho Europe [racing-experience.fr]

July 17, 2020

Capricorn LAB C04 rear lower arm extension kit

Coming from Capricorn and made for their C04 platform are carbon shock extensions that mount directly to the rear wishbones. The parts are designed to work in addition with the new rear eccentric system. The lower shock position can now be moved more inboard or more outboard, depending on the eccentric position, ensuring a wider range of setup possibilities. The kit includes the lower arms, carbon fibre extension as well as mounting hardware.

View the attached extension here