Red RC » Brand

March 19, 2026

Schumacher CAT PB Optional Steering Arms

New from Schumacher for their CAT PB 1:10 4WD Buggy are these Optional Steering Arms. Used by their factory race team at the World Championship and other International events, the CAT PB ‘2 pip’ Carbon Fibre Steering Arms offer a new Ackermann position which gives more initial steering and has smoother mid to exit steering. This will help on tracks which require a less ‘tail happy CAT’ when exiting corners and allows the driver to lean on the steering without any snap oversteer.

Source: Schumacher [racing-cars.com]

March 19, 2026

Reedy Sonic 900 “Driver Edition” Competition 1:8 Motors

Reedy Power has announced the release of their new Sonic 900 Driver Edition 1:8 Competition Brushless motors. Available in a 1900kV & 2100kV option, the ‘Driver Edition’ was developed in close collaboration with the Reedy Power racing team, the Sonic 900 DE builds on Reedy’s proven Sonic platform. An updated rotor concept delivers a smoother, more linear power band, higher top speed, and improved reliability for 1:8 racers and casual enthusiasts. Each option of the motor comes with a unique rotor which is interchangeable between both and sold separately to fine tune power output and delivery for specific track conditions and driver preference. All Sonic 900 DE motors feature a precision CNC-machined can with adjustable timing. An integrated heat sink lowers operating temperatures which results in less fade over the course of a race, longer run times, and increased motor life. Sensored operation results in a smooth and controllable power band while the powerful 4-pole rotor is supported by precision ball bearings for reliability. A 200mm sensor wire is included.

Source: Reedy [associatedelectrics.com]

March 19, 2026

Kyosho Inferno MP11e 1:8 Electric Buggy

Having shown a prototype of its 1:8 electric buggy at the Nuremberg Toy Fair in Germany at the end of January, Kyosho has officially released images & details of the production Inferno MP11e. The latest-generation race chassis based on the nitro Inferno MP11 that debuted in 2025, is optimised to deliver top-level competitiveness in premier EP racing events, with the Japanese manufacturer stating that 1:8 electric buggy has gained global status highlighted by the inaugural IFMAR World Championship in 2025. where they competed with the previous MP10 platform. Features of the MP11e include a dedicated electric chassis made from 3mm A7075 duralumin with hard anodising. Precisely machined and milled in key areas to optimise weight distribution, controlled flex, stability, and overall rigidity. Adopting aluminium front hub carriers with a 12°kingpin angle. This design optimises steering geometry for increased stability at high speeds and refined drivability across all track conditions. Engineered for maximum aerodynamic efficiency, the new body features newly designed side rails on the cab roof, side spoilers, and a refined rear spine design. These elements deliver superior high-speed stability and enhanced cornering capabilities. The front/rear lower suspension arms utilise the proven Inferno MP11 sturdy design. Rigidity can be further tuned using optional carbon plates, providing the versatility to adapt your setup to specific track conditions and layout requirements. Adopting the latest MP11 standard front and rear bulkheads with a split type bearing holder design. This enables quick differential height swaps for optimal grip tuning and delivers a major leap in maintenance efficiency. Designed with a low centre of gravity and user-friendly gear mesh adjustment, the differential height is easily tunable by swapping bearing bushings, offering three distinct height settings. Easy diff access design with dedicated wire holders for neat and reliable cable routing. Features a straight-line drivetrain design that ensures highly efficient power transmission. Split left-right battery layout lowers the centre of gravity and optimises weight balance. Adjustable sliding battery tray supports short and mid-size batteries and allows fine tuning of weight distribution. The receiver is housed in a sealed dust-resistant box with a screw-fastened lid for protection while the ESC is mounted on a separate radio plate with adjustable fore-aft positioning for weight balance tuning.

View the full MP11e presentation here

March 18, 2026

Hudy 1:12 Alu Tweak Set-Up Wheels

New from Slovakian tool manufacturer Hudy comes these Aluminium Tweak Set-Up Wheels for 1:12 Pan Car use. The 40.5mm diameter set-up wheels are designed for precise and repeatable tweak adjustment on 1:12 Pan Car chassis. The rigid aluminium construction eliminates inaccuracies caused by rubber or foam tires, allowing accurate chassis balance checks. Foam tires used on pan cars can vary significantly in diameter after each run, making reliable tweak measurement difficult with the aluminium set-up wheels eliminating these inconsistencies and allow precise chassis balance checks. Each wheel is CNC-machined to exact tolerances and perfectly matched within the set for maximum setup precision.

View additional image here

March 18, 2026

RC Maker SP1 Chassis Stiffeners

RC Maker has added new Carbon Chassis Stiffeners as tuning options for its SP1 1:10 Electric Touring Car. The front and rear stiffeners are made from 2.2mm carbon fibre with 7075 Aluminium M3 threaded inserts. They are intended used for stiffening the chassis when additional weight is not required with this is particularly helpful with heavy steel chassis.

View more images here

March 18, 2026

Capricorn LAB GT2 Chassis Weights

Capricorn has introduced two new central chassis wights for its LAB GT2 1:8 GT car. Offered in 50 and 65 gram options, the weights are made from high-quality materials to ensure precision and durability and help improve the balance and performance of the car, providing greater stability and control on the track.

Source: Capricorn [capricornrc.com]

March 18, 2026

MXLR RimFinisher 1:12 Sanding Tool

New from MXLR comes this 1:12 specific RimFinisher tool that removes mold seams on rims to ensure a flat surface for perfect mounting on the axle hubs. Simple give two to three turns with very slight force and all the unwanted seams are gone. With an outer diameter of ~35,50mm the RimFinisher fits basically all modern times 1:12 rear rims, and most of current 1:12 front rims. There are very few exceptions for the front, when the wheel OD is too small. The lightweight 3D printed sanding block with MXLR World Logo comes as a set with 5 sanding disc’s which feature double sided tape on the backside for easy and simple installation on the sanding block. Also new from MXLR are their Bodyshell Mounting Hole Reinforcement parts. Not only useful to increase the reliability of your bodyshells they also re-align the mounting holes of your bodyshell in case of accidentally mis-positioning. Made of clear 0.5mm thick PC material featuring thin double-sided tape on the backside for easy and simple installation.

View more images here

March 18, 2026

Mugen Seiki MBX8R +4mm Chassis

Mugen Seiki Racing, the US distributor for the Japanese manufacturer, has announced the release of a new +4mm chassis for the MBX8R 1:8 Nitro Buggy. The hard coated aluminium chassis makes for a longer wheelbase for added stability. In addition to the longer chassis option, they have also added a 119mm Rear Center Drive Shaft which is necessary to make the conversion. Sold as a set, it is also possible to by the chassis and shaft individually.

Source: Mugen Seiki Racing [mugenracing.com]