Red RC » Brand

September 20, 2024

RC-Project Spec2 1:8 Buggy Clutch Shoes

Italy’s RC-Project has released new 1:8 Buggy clutch shoes which are a complete redesign of the the previous 2022 version. This Spec 2 configuration not only ensures greater durability and improved traction on low and medium grip terrain, but also offers significant fuel savings. An evolution designed to ensure optimum performance and greater efficiency in all conditions. The shoes and springs will fit all the following flywheels: Mugen, Sworkz, HB, Xray, Alpha, Agama, Carrara Z9, WIRC, Mayako, Infinity and will work on all bells with the following diameters: Ø26, Ø26.1, Ø26.3, Ø26.4 and Ø26.5.

Source: RC-Project [rc-project.it]

September 19, 2024

Pro-Line MBX8 Sector Body

Pro-Line has released its Sector Body for the Mugen MBX8/MBX8R 1:8 Buggy. The Sector features a ground-up redesign to optimise the handling of your buggy in the trickiest of track conditions. The low-slung design features a laid-back windshield and long center fin for ideal stability and side bite, lowering your lap times. The overall rake of the body contributes to the planted yet drivable feel of the Sector, while the body has the right amount of clearance around the gearbox, chassis, and bulkhead. Made in the USA , the body is made with Crystal Clear Polycarbonate and is protected by an overspray film.

View more images here

September 19, 2024

Ruddog 2.2″ 1:10 Buggy and Truck Wheels

Ruddog is expanding its range of high-quality RC components with a new selection of 2.2″ wheels, specifically designed for 1:10 buggy and truck use. With a clear focus on performance, durability, and precise handling, Ruddog delivers wheels that excel on modern high-grip tracks. Made from premium plastic, these lightweight yet robust wheels ensure a perfect fit for models from brands such as Team Associated, Xray, Yokomo, and Schumacher. Featuring a 12mm hex mount and an optimised rib structure, the wheels offer enhanced stability without unnecessary weight. Available in both white and yellow, these wheels are compatible with 2WD and 4WD buggies and trucks.

View more images here

September 19, 2024

PRO 10 European Cup 2024 – Report

The PRO 10 European Cup took place recently in Grenoble, France, where Team WRP could take the TQ and win in both the Modified and Stock classes. Almost 60 drivers, representing the Netherlands, Belgium, Germany, Switzerland, Austria, Italy, and France, took part in the four day event which was greeted by perfect weather and perfect track conditions for racing. In qualifying it was Swiss racer Markus Schneider who took his WRP IV to the TQ over the JRP of France’s Julien Parnot. With four leg 5-minute Mains, Schneider would taking the first three for the overall winning setting a new track record of 14.780 secods in the process which is 0.5 sec faster than the old record set at the 1:8 Nitro Euros in 2019. He was joined on the podium by the VIP Performance car of Germany’s Tobias Weist and Dirk Elsebusch. In Stock, Koen Geurds Koen claimed the the TQ and win with his WRP IV which featured a special cooler and a handwound 10.5 WRP outlaw motor. Laurent Lauper would finish runner-up with third going to Patrick Bariot.

View podiums & winning car images here

September 19, 2024

Hobbywing XeRun 3652/3660 G3 Motor

Hobbywing has released a new G3 version of its XeRun 3652/3660 motors which are intended for 1:10 use. The G3 takes this strong power and high RPM motor’s performance to the next level with the the 3652-4500KV motor now delivering an impressive 𝟓% boost in overall power and efficiency over the previous G2. The motor also makes large power gains when the turbo is turned on, the maximum Motor RPM increases by 50-100% when the Turbo timing is activated at 24°. The XeRun 3660 G3 boasts up to 75,000 RPM when compared with the XeRun 3660 G2 motor, even in scorching temperatures of 140°C thanks to the the rotor durability being increased by over 15%.

View more images here

September 18, 2024

Marka Racing 1:28 RK-LP1 Pan Car Body

Italy’s Marka Racing has released this new 1:28 lexan RK-LP1 Pan Car Body. Configurable for 98mm wheelbase, the body is intended for use with Kyosho Mini-Z MR-02, MR-03, PN 2.5W, GL Racing GLA, GLR, Atomic AMZ, BZ, Jomurema KR128-R01, etc. Supplied clear, the body is available in both regular and lightweight lexan options. The body is approved by PN Racing for use at the upcoming World Championships that take place in Vélizy Villacoublay, France, from October 31st to November 3rd.

View more images here

September 18, 2024

Avid AE Machined Shock Spacers

New from Avid Racing Concepts are these AE Machined Shock Spacers to fit the recent 13mm and 12mm AE shocks for the B7/B6 line up of cars. They are machined with a Swiss lathe so they are perfectly true and from a self-lubricating plastic to ensure they are super smooth while maintaining strength. They install just like the manual states – Thin spacer > Xring > thick spacer > Xring > stepped spacer with
the wide side in first. Spacer pack includes all the spacers needed for 4 shocks – 4 thin spacers, 4 thick spacers, and 4 stepped spacers.

Source: Avid [avidrc.com]

September 17, 2024

Iris sweeps Austrian FWD Nationals

After all six events of the Austrian Nationals the 1:10 FWD championship concluded with German manufacturer Iris securing 1st, 2nd, 3rd, and 6th place in their first full year of competition. Veteran racer Philipp Stadler, with 3 wins and 3 TQs emerged as the new Austrian Champion while alongside him, two young talents, Matheo Buchhalt (2 wins, 1 TQ) and Loris Buchhalt (1 TQ), took 2nd and 3rd place, respectively, locking out the overall championship podium and securing the youth title as well. Markus Buchhalt rounded out the excellent results with a strong 6th place in the overall championship. While the team used the ONE.05 chassis for the first five rounds, the final race of the series marked the debut of the new ONE.1 and it enjoyed the perfect debut taking the victory!

Source: IRIS [iris-racing.com]