Red RC » Brand

December 2, 2019

JConcepts 1989 Ford F-150 California Stampede body

Coming from JConcepts is their new 1989 Ford F-150 California body shell for the Traxxas Stampede truck. The body was built for the Traxxas Stampede “BIGFOOT No. 1 The Original Monster Truck” and it offers first class styling and its exterior is accentuated with smooth raised fenders and stepped front bumper. The strongest point to the design resolves back to the husky front and rear fenders giving it that pre-runner look. The extra bulk in this department gives the truck a boastful look capable of clearing an assortment of tires. A racy cab with scribed in window net, built-in racerback and roll-bar bed hosts a location for the mock spare tire for those long days in the dunes. The body features Ford licensed grille and headlights, wrap-around parking lights, a minimalist grille and an accurate and clean-looking Ford/JConcepts decal sheet. The body is a direct fit for the Traxxas BIGFOOT No. 1 and for fitment on all other Stampede models, its necessary to use the Traxxas #3619 body mount kit.

View more images here

December 2, 2019

Yeah Racing 1/12th scale wheel well marker

Following the release of their 1/10th on-road wheel well marker Yeah Racing now also offer a variant specific to 1/12th scale pan cars. Machined from high-quality aluminium and offering a 45mm diameter the tool allows for easy and convenient wheel well marking and thus more precise and visually appealing body shell prepping. In addition to marking the front and rear wheel wells the tool also allows to highlight the lower body cutting line at 4mm, 5mm or 6mm height.

View more images here

December 2, 2019

Xray T4 2020 graphite bumper upper holder brace

Xray have announced the release of their graphite bumper upper holder brace for the T4’20 touring car. The part was developed to offer increased protection to the chassis in the event of a crash as it braces the bumper against the front bulkheads at frontal impacts. Machined from 3mm carbon fibre the brace is a direct fit for the kit’s composite and also the graphite optional bumper upper mount.

View another image here

December 2, 2019

Serpent 750 lightweight alloy wheel axle set V2

Coming from Serpent and made for the 750 1/10th scale on-road kit is the new optional lightweight aluminium CVD wheel axle set. CNC machined from high-quality aluminium and hard-anodised for wear these optional CVD sets can be used both in the front and rear of Serpent’s popular nitro touring car. Including all necessary hardware these optionals are a direct replacement of the standard part. Weighing in at only 14g per pair these wheel axles are almost half the total weight of the standard steel variant and having these options installed on both ends of the car will save a total of 22.6 grams of rotating mass for increased acceleration and reduced un-sprung mass.

Source: Serpent [serpent.com]

December 2, 2019

Xpress Execute FT1S club-level FWD touring car kit

Xpress have released first images and information of their new club-level Execute FT1S FWD touring car kit. Based off of the recently introduced FT1 competition touring car, the “S” variant will be a more cost-oriented offering, featuring the same geometry as the full-blown race kit, however the use of fibre class chassis and shock tower components as well as moulded composite bulkheads and suspension mounts are keeping costs down. The kit is still very race-worthy though thanks to the addition of front and rear anti-roll bars, threaded aluminium shock absorbers, alloy shock mounts as well as alloy chassis stiffeners. Other features include a front bumper with intogegraded low CG fan mount, 3 degree toe in rear suspension mounts, a ball-raced steering rack, single joint universals, adjustable steering geometry and a rear bulkhead stiffener. All parts are compatible with the FT1, meaning owners can upgrade the FT1S over time if desired. The kit will hit stores very soon.

View more images here

December 1, 2019

Samix Enduro 6mm offset aluminium hex adapters

Coming from Samix and made for the Element RC Enduro trail trucks are new aluminium hex adapters with 6mm offset. The wheel adapters are machined from high-quality aluminium and they are available in gun metal, blue or black anodising all of which feature machined silver edge details. The adapters are a direct fit and they come in sets of four including pre-installed set screws.

View another image here

December 1, 2019

SWorkz S12-2 2WD buggy kit – Coming soon

SWorkz have released a first teaser image of their forthcoming new S12-2 1/10th scale 2WD buggy kit. No official details on features and specifications are available yet, however the drawing seems to depict a buggy that lacks a front shock tower which could be a hint on a completely new front end design compared to the previous S12 series cars. We bring you more information on the kit and its details once they become available.

Source: SWorkz [sworkz.com]

December 1, 2019

OfficinaRC T4 2020 crash chassis helper

OfficinaRC have introduced their crash chassis helper for the Xray T4 2020 touring car. The 3-D-printed part was developed to be attached to the front bumper upper brace and it helps to brace the bumper against the front bulkhead in the event of a crash, preventing damage such as bent aluminium or delaminated carbon fibre chassis. The part is a direct fit and available from now on.

View more images here