Red RC » Brand

November 29, 2019

Klinik RC Cat L1 simple battery cradle

Klinik RC have introduced their new simple battery cradle for the Schumacher Cat L1 4WD buggy. The design works with full size shorty up to 6000mAh and LCG packs utilising the full forward battery position which is considered to be the most popular among the L1 racers. The cradle is CNC milled from 3mm carbon fibre and allows changing batteries very simple and easy. Included in the set come two battery cradles, four hold down O-rings, 3x14mm screws as well as a decal sheet.

View another image here

November 29, 2019

Xray T4’20 alloy & brass rear chassis braces

Xray have announced the release of two rear chassis braces, machined from aluminium or brass, for the all-new T4 2020 mid-motor touring car kit. The T-shaped braces are designed in a way that allows to access a total of four stiffness settings by using variable amounts of screws and shims to attach the brace in longitudinal and transversal directions. While the lightweight aluminium is mainly used to stiffen up either the carbon fibre or aluminium chassis, the 15g brass variant also helps to fine-tune the weight balance with the brass T-brace being of help especially for higher grip track conditions. The braces are available separately and they include all needed screws and shims.

View the 15g brass brace here

November 29, 2019

Savöx SB-2262SG Monster HV brushless low-profile servo

Savöx have introduced their new SB-2262SG Monster Series HV brushless low-profile servo for 1/10th and 1/8th scale applications. Offering up to 30kg-cm of torque and a speed of down to 0.065s the high-voltage compatible brushless motor servo provides exceptional performance for all demanding electric and nitro applications while weighing in at only 65g. A machined aluminium case with heatsink design middle section and the overall construction, that was taken over from the SB-229X series servos, ensure high durability. The servo is usable with up to 8.4V input voltage and it sports an all-black receiver wire for stealthy looks.

View another image here

November 29, 2019

7075.it Inferno MP10 closed switch cover

Made for the Kyosho Inferno MP10 1/8th off-road buggy is 7075.it’s closed switch cover. Machined from high-quality aluminium and coming with an anodised surface finish for wear and looks, the laser-etched part replaces the standard switch cover with a closed variant for all drivers that scrapped the standard switch over a DIY “plug” solution.

Source: 7075.it [7075.it]

November 29, 2019

RC-Project clutch bell retaining screw

RC-Project have introduced their new “Limited Edition” titanium clutch bell retaining screw for 1/8th off-road and single-speed GT vehicles. Machined from highest quality Grade 5 6Al4V titanium the screw will offer different thermal expansion compared to steel, making it possible to undo or fasten the bolt even when the engine is still hot after a run. In addition the new design of the fastener prevents it from rubbing on the clutch bearing or end bell which reduces heat built up while adding to the overall durability of the whole system. With a screw head thickness of 3mm the clutch bell retainer also presents collisions with the fuel tank in tight surroundings. What also makes the screw stand out is the 5.5mm socket head that allows for much easier and more reliable assembly and easier removal compared to using a classic 2.5mm hex head. As each screw features a unique number, RC-Project gives a 1-year warranty on the fastener that is available separately or in pairs.

View more images here

November 29, 2019

Smokem XQ1 split lower aluminium bulkheads

Available soon from Smokem are new lower split design aluminium bulkheads for the Xpress XQ1. Offering vastly improved flex characteristics, the parts allow the car to generate improved grip while offering a wider tuning window. Another key difference to the stock bulkheads is the use of flanged bearings for mounting the swaybars to the bulkheads. This allows the bearings to be inserted from the centre of the car for easier installation and smoother operation. The bulkheads will be available as a complete set of four with bearings included as well as separately, and they suit both the standard XQ1 and mid-pulley converted XQ1.

Source: Smokem Racing [smokem-racing.com]

November 29, 2019

Serpent 989 2.5mm carbon fibre radio plate

Serpent have introduced an optional radio plate for the 989 Viper 1/8th on-road kit. Made from 2.5mm thick ultra high quality carbon fibre, the radio plate offers a stiffer option to the standard 2mm part. Used by team drivers at the 2019 World Championships, this option is designed to increase steering response along with adding to the overall stability of the car.

Source: Serpent [serpent.com]

November 29, 2019

Yeah Racing SW-01 roll assist bracket

Made for Tamiya’s popular SW-01 stunt truck and coming from Yeah Racing is the hybrid aluminium and carbon fibre roll assist bracket. Made up using black anodised aluminium and machined carbon fibre, the roof-mounted bracket allows for easier front rolls and front flips compared to just having the flat roof of the standard Lunch Box body shell, making it a must have for everyone who wants to extract maximum fun from the little truck. The bracket is a direct fit and it is available in black or blue colour.

View more images here