Red RC » Brand

August 6, 2019

Xtreme Racing Project 4X Pro flex battery hold down kit

Following the release of the flex battery hold down kit for the Xray T4, Xtreme Racing now also have a variant for the Serpent Project 4X Pro available. The set replaces the standard battery mounting system and does away with the need to use tape to hold down the battery pack in favour of a quick release system that only lightly tabs the battery pack, resulting in quicker battery swaps and less influence in chassis tweak. The set includes two battery hold downs, two LiPo battery supports and 6 shooter thumb fasteners along all needed mounting hardware.

View another image here

August 6, 2019

Power HD TR-4 TRX-4 crawler servo

Power HD have announced the release of their Traxxas TRX-4 specific TR-4 waterproof mini servo. The high-voltage compatible servo pulls up to 2.6kg-cm of torque at a speed of down to 0.10s and it features a long 35cm receiver wire and mini-class dimensions of 22.5×12.5×24.0mm to ensure the servo is a direct fit in the TRX-4 crawler. The servo utilises a 25T spline, metal gears and special gaskets make it waterproof for go-everywhere capabilities.

View a list of the specifications here

August 6, 2019

Tamiya TB-05 aluminium centre driveshafts

Coming from Tamiya and made for the shaft-driven TB-05 touring car are two aluminium centre driveshaft kits. First up is a set for front motor converted cars that include 42mm and 90mm centre shafts while the rear motor specific kit includes a single 133mm centre shaft. All are made of high-quality aluminium with the blue anodising improving wear resistance and looks. Included with the driveshafts come steel gearbox input shafts and and all needed hardware. Using the shafts over the original dogbone construction will reduce weight and slop for greatly increased drivetrain efficiency. Both sets will become available by end of September.

View the rear motor driveshaft kit here

August 5, 2019

Samix Enduro brass driveshaft cap set

Coming from Samix and made for the Element RC Enduro trail truck is a brass driveshaft cap set. Included are two thin and two thick driveshaft caps that add a total weight of 17g to some of the lower parts of the chassis, which results in improved climbing performance. In addition the caps ensure greater drivetrain durability while adding visual impact. The parts come as 4-piece set and they feature a black surface coating and gold-coloured Samix logos.

View more images here

August 5, 2019

Hudy FWD pre-cut slick tyre set

Coming from Hudy and made for the growing front wheel drive 1/10th touring car class is a 4-piece set of pre-glued tyres. They feature a semi-slick tread for good traction and side bite and they come pre-glued on black multi-spoke rims, offering cook looks. The directional tyres include suitable inserts and they are usable for both asphalt and carpet racing.

Source: Hudy [hudy.net]

August 5, 2019

Serpent 1/8th on-road Nickel-coated V2 clutch bell

Serpent have announced the immediate release of their new Nickel-coated aluminium V2 clutch bell for the Centax range of clutches of all Serpent 1/8 IC models. Reducing rotating mass means a significant increase in performance, and the new clutch bell is not only super light weight but also durable at the same time. The bell is recommended to be used with both the yellow and black optional clutch shoes for best performance.

Source: Serpent [serpent.com]

August 5, 2019

Xray XB8 series eccentric steel IAC bushings

Xray have introduced their new eccentric steel bushings foe the IAC Integrated Adjustable Caster C-hubs of the XB8 series kits. The bushings allow for ±2 degrees of caster adjustment depending on the orientation of the inserts. The bushings are of a keyed design to ensure secure and reliable mounting with the heavy steel construction adding unsprung weight if needed. The bushings come in sets of two and as 0 degree, 1 degree and 2 degrees variants and they are usable for XB8, XB8E, XT8, XT8E, GTX8 and GTXE kits utilising the front C-hub suspension.

View the 1 and 2 degrees inserts here

August 5, 2019

Tamiya GF-01TR Monster Beetle Trail kit

Tamiya have announced the soon release of their GF-01TR based Monster Beetle Trail kit. The 1/14th scale truck is based on the GF-01TR monocoque chassis that features a centrally placed motor, double wishbone suspension components with portal axles and gum-filled gear differentials. The vehicle is decked out by a moulded plastic body shell with separate window inserts and chrome details such as fog lamps, engine and exhausts. Yellow wheels and grippy chevron/pin tread tyres round out the package. The kit will hit stores in September.

View more images here