Red RC » Brand

June 25, 2019

Xray XB8 zero rebound shock absorbers

Coming from Xray are their new zero rebound shock absorbers for the XB8 series of buggies. The dampers can be set to allow less rebound than standard shock absorbers, decreasing responsiveness and improving bump absorption on bumpy tracks. The design of the shock body and upper cap allows the installation of a ribbed shock membrane on the top of the shock body instead of the traditional installation into the upper cap. The installation of the ribbed membrane on the shock body allows excess oil to leak out, and along with a shock cap vent hole and adjusting screw allows the adjustment of the amount of air until the desired zero rebound is achieved. The lower shock assembly ensures that the shock rod will move very freely inside the shock body, while minimising oil leakage and keeping dirt out. Other features include double O-ring sealing, 3.5mm shock shafts as well as lower rubber boots to keep dust, dirt and moisture away from the shock shaft and seals. Available separately for the front and rear, the shocks include a complete set of pistons but not springs.

Source: Xray [teamxray.com]

June 25, 2019

Yokomo introduce new Racing Performer offroad springs

Coming from Yokomo are additional 1/10th scale buggy and truck springs as part of their Racing Performer range of option parts. Available very soon are three new front and two new rear springs with the front items being 1mm longer than the previous springs for improved vehicle control during cornering. They come in soft (high grip dirt), medium (astro/carpet) and hard (4WD carpet) variants while the rear springs will offer additional setup possibilities especially on high-grip surfaces with hard (astro/carpet) and soft (high grip dirt) variants being available.

View the other new springs here

June 25, 2019

TMG Speed B74 low rear shock tower

TMG Speed have announced the release of a low rear shock tower for the Team Associated B74 buggy. Machined from high-quality carbon fibre the tower has more adjustability than the stock part and it makes for slightly increased droop which will improve bump handling. The shock stay is available now.

Source: TMG Speed [tmgspeeduk.com]

June 25, 2019

T-Works 34mm universal 4-shoe clutch set

Coming from T-Works is a universal 34mm 4-shoe clutch set for 1/8th buggy, truggy and GT kits. It contains a machined aluminium 34mm diameter flywheel, alloy clutch shoes as well as 4-piece sets of 0.9mm and 1.0mm clutch springs to fine-tune the clutch’s behaviour. Also included are the clutch nut, drive cone and clutch screws. All parts are also available separately for spares or repair.

Source: T-Works [rc-tworks.com]

June 25, 2019

C-Pub professional on-road body stickers

C-Pub from France have announced the release of their new body shell stickers for 1/8th and 1/10th scale on-road bodies. The stickers are professionally printed on ultra-light liner material and they are fuel-proof without the need for a clear protection layer, making them very light weight with a set of 1/8th scale body stickers weighing in at only about 8g. In addition the stickers are very thin, allowing easy wrapping around contours and curves. The stickers allow to create colourful body shell designs in minutes and they comply with ETS body colour rules. The stickers are also very easy to apply as the glue allows to shift the decals around and it only cures once the stickers are in place and pressed on. In addition to the readily available designs C-Pub also offers custom designs.

View a decorated 1/8th scale body here

June 24, 2019

ZooRacing Zoodiac 190mm GT body shell

The Zoodiac GT body shell for 190mm touring cars is ZooRacing’s latest high performance 1/10th scale on-road body shell and the brand’s first go on the popular GT market. The goal was to create a stylish yet efficient body with advanced aerodynamics while still offering a somewhat scale look to ensure the body meets all current GT/USGT class rules. The lid features a low-slung silhouette to which sports sculptured fender sections that give plenty of room even for larger GT class tyres while the low-profile front hood section optimises the airflow around the fenders and towards the huge windscreen. The latter is designed to offer a slight cab forward design for best possible airflow towards the rear trunk section and rear wing. Going towards the rear of the body, the newly designed side pods not only add to the overall structure of the shell, they also add visual impact and help to balance the overall downforce by offering a slight upwards sweep. The somewhat simple rear trunk lid design helps with undisturbed airflow towards the rear wing, that was designed to meet all GT class rules. The wing is moulded with two cut lines, a standard 10mm section and a taller “outlaw” marking for increased downforce.

Continue reading here

June 24, 2019

Jessica Palsson teams up with Schumacher

Schumacher have announced the signing of former long-time Kyosho team member, Jessica Palsson to their electric off-road team. Although only 16 Jessica has established herself as a top racer in Sweden and around Europe and Schumacher are extremely delighted to have her on board. The Swedish Champion and EOS A-finalist will race the CAT L1 and Cougar Laydown buggies around Sweden and Europe including the IFMAR World Championships in Slovakia later this year.

Super happy to announce my new 1:10 buggy chassis – Schumacher! I believe combination Schumacher – LRP – Sanwa in 1:10 buggy will work good for me. I think it’s perfect mix and I feel that I’m ready for new chapter in my life. Our first race together will be at WC in Slovakia and then focus on future races. Big THANKS to Robin, Trish, Harvey and all in #schumacherfamily to take me into your racing team. Will be so fun to work with you guys at races!

Source: Schumacher [racing-cars.com]

June 24, 2019

Xray 1/12th pan car solid rear axle set

Coming from Xray and made for their X12 series of 1/12th scale pan cars is a solid rear axle set. It replaces the standard diff for a spool axle that improves acceleration and steering in high-traction conditions while offering a low weight, perfect balance and vibration-free running. The axle is made up using a carbon fibre axle shaft and an aluminium wheel hub system and it is also usable on other brand cars.

Source: Xray [teamxray.com]