Red RC » Brand

June 14, 2019

Destiny RX-10 new design suspension arms

Destiny have announced the release of new design suspension arms for RX-10 series of touring cars. Offering improved traction and reliability the full-face arms are available in two different length and using different lower shock mounting positions which allows to fine-tune the suspension geometry. Available are the original geometry Type A arms (front 53mm/32.5mm, rear 54mm/38.5mm) as well as the new geometry Type B (front 53mm/31.5mm, rear 54mm/39.5mm), and new length Type C (52mm/31.5mm, rear 55/39.5mm) and Type D (52mm/30.5mm, rear 55mm/40.5mm) arm sets.

Source: Destiny [destinyracing.jp]

June 14, 2019

ORCA OE101 stock class ESC – Coming soon

ORCA have released first teaser images of their forthcoming new OE101 spec class speed controller. It features an extreme low centre of gravity design that makes it possibly the thinnest spec class ESC on the market while still offering the smooth driving feel and power delivery of its bigger brother, the OE1. Full details on specifications and features will becoming available soon with the controller being set for an August release.

View more images here

June 14, 2019

Ultimate Racing M3X V2.0 nitro off-road engine

Modelix Racing have announced the release of the new Ultimate Racing M3X V2.0 3.5cc nitro off-road engine. Like its predecessor M3X, the V2.0 is based on the square stroke O.S. Speed B21 Ty Tessmann II edition engine. The engine has been specifically designed for maximum power, performance and tuneability while offering super smooth linear power over the whole RPM range. The carburettor, crankcase and crankshaft have been developed to improve fuel consumption while the cooling head has been redesigned by Modelix. It is not as low as the B2102 lower profile but it is lighter so it keeps the centre of gravity as low as the B2102 while improving its performance in very high temperatures. Unlike the previous M3X, the V2.0 comes with the 21 J3 carburettor. Its high-speed needle holder has been redesigned for a better fuel flow cooling, lowering the temp of the carb, offering improved idle stability, fuel mileage and overall engine performance. In addition, the uniball joint of the carb slide has also been modified with two stoppers instead of one. With this new modified design, racers can easier adjust the angle of the uniball joint without having to disassemble the engine. Also the original design of the O.S. backplate has been modified. It has been milled to improve the gas flow going to the piston and the backplate now is made of 7075-T6 Swiss aluminium to improve durability of both the conrod and backplate. Thanks to its design, you can remove the backplate without damaging the conrod even when it is on its lower position (PMI). The lateral grooves allow to easily remove the backplate without having to use any tool that can damage it.

Continue reading here

June 13, 2019

Reedy SC400X brushed crawler ESC

Reedy’s all-new SC400X brushes speed controller, standard equipment in the Element Enduro RTR, is now available on its own. The speedo is 2S to 3S LiPo compatible and equipped with advanced features intended specifically for crawlers and trail trucks. Fully proportional forward and reverse gives precision control on rocky terrain while an option of 0%, 50%, or 100% drag brake setting helps maintain control on steep ascents and descents. Convenient dual auxiliary power leads can be used to power LED lighting or other scale accessories. The durable water-resistant case protects the ESC from the elements and an integrated heatsink keeps temperatures in check when using high-power motors during extended sessions. Flexible silicone wires, a low-resistance battery T-plug connector, and bullet motor connectors round off the list of features.

View lists of the features and specifications here

June 13, 2019

RC-Cox setup system aluminium tray

RC-Cox helps to organise pit spaces with the introduction of their new aluminium tray for Arrowmax or Hudy setup systems. Machined from high-quality aluminium and sporting a detachable toe plate holder as well as a carbon fibre insert for looks, the tray was designed to hold 1/12th to 1/8th scale setup systems as well as the acrylic toe plate and four wheel thumb nuts. The toe plate holder can be attached on the left or right hand side as well as the back, ensuring the plate wouldn’t disturb the mechanic during building, setup or maintenance. The black anodised tray come with machined silver edge details and it is available now.

View more images here

June 13, 2019

T-Works RC8B3.1 aluminium shock caps

Coming from T-Works and made for Team Associated RC8B3.1 series kits are two new aluminium shock cap sets. Available as volume compensating diaphragm and bleeder cap aeration set, the shock caps allow to adjust the shock performance to match specific needs when it comes to track conditions or driving styles. The diaphragm set includes a total of eight rubber volume compensators in hollow and honeycomb design while the aeration shock cap kit includes seals and gold-colour bleeder screws. Also included in both sets are shock mount bushings for improved durability.

View the bleeder caps here

June 13, 2019

Reds Racing 8000mAh & 6500mAh 4S LiPo packs

Reds Racing have announced the release of their all-new 14.8V 4S hardcase LiPo battery packs. Available as 8000mAh 100C and 6500mAh 75C variants, both are made of high-quality cells and they come in a protective hardcase pre-wired with industry-standard balancer ports and T-type connectors. The 4S packs are ideal for competition 1/8th scale on-road and off-road usage with 1/10th and 1/12th scale 2S and 1S packs following at a later date.

View the 6500mAh battery here

June 13, 2019

T-Works roll out B74 optionals

Coming from T-Works and made for the new Team Associated B74 buggy are a couple of option parts such as titanium ball ends, turnbuckles and screw sets. First up is a 14-piece ball end set that is machined from high-quality 64 grade titanium. The parts replace the standard ball ends for items of lower weight and greater corrosion resistance. Also new is a 7-piece set of titanium turnbuckles. Like the ball ends the parts will lower the overall weight while offering cool looks and greater corrosion resistance. Last but not least come two screw kits – a 119-piece UFO head titanium set and a 144-piece gold-colour steel fastener kit. The titanium set will again make for a weight reduction while the golden screws mainly add bling.

View the other new parts here