Red RC » Brand

April 24, 2019

JConcepts T6.1 & SC6.1 Fin titanium turnbuckle kit

Coming from JConcepts is their new Fin titanium turnbuckle set for the Team Associated T6.1 stadium and SC6.1 short course truck. Designed specifically for style, durability and performance, the base of the shafts design is centered around a .143” titanium hex size which gradually tapers down into a 3mm thread base design which accepts the standard AE ball-cup configuration. The focus of the styling surrounds the lengthened adjustment hex area and the finned cuts that rotate about the center. The turnbuckles are produced with left and right hand threads with the left being conveniently marked for easy orientation.

View more images here

April 24, 2019

MonacoRC introduce new hoodie

MonacoRC have introduced their new high-quality hooded sweater. Made from quality cotton, the gray hoodie features red highlights such as the inside of the hood and in the laces. The embroidered customisations are featured on the back of the hoodie and two more are applied on the chest and on the left sleeve. Details focus on the two pendants at the end of the laces are also personalised with MonacoRC logo. The slim fit hoodie is available in a range of sizes and it helps to stand out both on and off the track.

View more images here

April 24, 2019

RC Concept MC5RS 3.5cc off-road engine

RC Concept have introduced their new MC5RS 3.5cc nitro off-road engine. The RS is based on the popular MC5X and MC5 World engines but utilises a new lighter piston for quicker spool-up and higher RPM. In addition a redesigned cooling head makes for a lower centre of gravity while retaining the same heat dissipation capabilities which is important when running in high ambient temperatures. A new black and red looks makes the engine stand out. Other features include an Avid ceramic front bearing, a Swiss-made ceramic main bearing as well as a DLC-coated crankshaft, a double needle carburettor and a piston sleeve. The package is rounded out by 7mm and 8mm venturi inserts. The engine is available separately or including EFRA 2099 or 2133 exhaust systems.

content

April 24, 2019

Infinity IF18 titanium & aluminium screw sets

Infinity has released both titanium and aluminium screw sets for their IF18 to reduce the weight of its World Championship winning chassis. In the titanium range, the screw sets are offered to cover both the upper and lower sections of the car. The 111 piece Upper set saves 18g compared with the standard kit steel screws while the 47 piece Lower set brings a weight saving of 12 grams. Use of the titanium screws will slightly increase chassis flexibility allowing fine tuning of the car setup for any conditions. In aluminium, two upper sets are offered. Available in black or red colours, the 111 screws will save over 30 grams and offer a mild driving characteristic by increasing chassis flex in a well balanced manner.

View the screw sets here

April 24, 2019

Hudy carbon fibre touring car wing side plates

Coming from Hudy are two sets of carbon fibre side plates for 190mm and 200mm touring car rear wings. Machined from 0.5mm thin premium carbon fibre the side plates add cool looks and they are machined to match EFRA and IFMAR size regulations. However, prior to using the plates, please check with your track’s or series’ regulations as some rules deny the use of carbon fibre body optionals.

View more images here

April 24, 2019

Yeah Racing FF03 & XV01 carbon bumper support

Coming from Yeah Racing is a carbon fibre bumper support for the Tamiya FF03 and XV01 kits. Machined from high-quality carbon fibre the support plates offer improved structural integrity of the bumper for added chassis and motor protection. The set includes two plates that are a direct fit with the above kits.

Source: Yeah Racing [yeahracing.com]

April 24, 2019

Xray XB8 graphite PB steering block & rear upright LB

Xray have introduced new graphite composite PB steering blocks and rear uprights for the XB8’19 buggy. The lightweight yet strong parts utilise a new graphite composite material that ensures free suspension movement in dusty conditions while also offering increased stability and corner speed on high to very high bite tracks. Both parts are designed for the use with larger 8x16x5mm outer ball bearings for increased reliability and life-span with the front pivot ball steering block being usable for the XB8’19 while the rear upright also fits the GTX8 and GTXE. The parts are non-directional meaning hey are usable both on the left and right hand side of the car and they are available separately.

View the rear upright here

April 24, 2019

RC-Project 8ight-X titanium & aluminium option parts

RC-Project from Italy have introduced new option parts for the TLR 8ight-X 1/8th off-road buggy. First up is a set of titanium shock standoffs that are made of high-quality Grade 5 6Al4V material and that features rolled threads that guarantee a perfect coupling with the shock nuts and increase the resistance of the Titanium by 35 percent. Weighing in at 4.8g for the pair, the standoffs will lower the overall centre of gravity while adding rigidity and visual impact at the same time.

Continue reading here