Red RC » Brand

March 4, 2019

Schaffner B6 series waterfall fan mount

Schaffner Racing Products have introduced a new waterfall fan mount for Team Associated B6 and B6.1 based vehicles. The 3-D-printed part was developed for stand-up transmission setups and it ensures improved motor cooling for less performance fading towards the end of a run. When using the mount, most LCG battery packs will fit to the furthest back position, however standard size shorty packs will move back to just one hole position forward, giving owners nearly full adjustability with most battery packs. The fan mount is usable for B6, B6.1, T6.1, and SC6.1 kits and it is also available in a variant for laydown and layback gearboxes.

View more images here

March 4, 2019

Xray XB4 81mm ECS front driveshafts

Xray have introduced their new double joint ECS 81mm front driveshafts for the XB4 off-road buggy. Equipped with durable 2.5mm pins the dual joint design driveshafts greatly reduce wheel chatter at high steering angles, and they make for increased stability, steering and cornering speed compared to standard single joint driveshafts. In addition landing after jumps is also improved- The driveshaft is of a fully rebuildable design, made of high-quality Hudy spring steel and it comes as single item.

Source: Xray [teamxray.com]

March 4, 2019

Capricorn C80 new design front & rear hubs

Coming from Capricorn are new design front and rear and hubs for their C80x series of 1/8th scale on-road kits. The hubs sport separate aluminium bearing inserts that ensure super-precise bearing installation and a drivetrain that produces less drag during acceleration as the bearings do not flex – and pinch – under load. The result is increased drivetrain efficiency that can add up to 2km/h of top speed. In addition the patent pending hubs feature a new geometry for increased steering and traction.

View more images here

March 4, 2019

Bittydesign 1/10th 190mm GT bodyshell – Teaser

Bittydesign have released a first teaser image of their forthcoming new 190mm GT body shell. Designed with GT and USGT racing in mind the body seems to be a of a pretty radical design given the aggressively looking front end. Full details are expected to surface soon.

Source: Bittydesign [bittydesign.net]

March 4, 2019

Vigor T4 & BD9 centre stiffener links

Vigor RC have announced the release of carbon fibre centre link sets for the Xray T4 2017 to 2019 and Yokomo BD9 touring cars. The set includes 1mm, 1.5mm and 2.2mm centre links that allow to tune the pitch and roll stiffness of the chassis by simply swapping the links, with the thinner parts allowing for more flex while the stiffer braces reduce overall flex. The sets are available separately for the T4 and BD9.

View the BD9 centre link set here

March 3, 2019

Xtreme Racing X6 carbon fibre charger stand

Xtreme Racing have released their new carbon fibre charger stand for the popular iCharger X6. Constructed from high-quality carbon fibre the stand holds most X6-sized chargers at an angle for better viewing and more airflow around the device. The snap-together stand is designed so that most 90x40mm server-style power supplies will fit below it to take up less room in the pit space. The set includes precision-machined carbon fibre plates and a pair of aluminium spacers with fasteners.

View more images here

March 3, 2019

Vigor RC BD9 battery mount set

Vigor RC have introduced a carbon fibre battery mount kit for the Yokomo BD9 touring car. The tweak-free battery mounting system is constructed from carbon fibre and aluminium and it does away with the need to use tape to strap the battery into the chassis in favour of a mount that only slightly touches the upper parts of the battery. The result is more natural and equal flex left to right while the overall design also allows to shift the battery forth and back in order to fine-tune the car’s weight balance.

Source: Vigor RC [vigorrc.com]

March 2, 2019

1up Racing double-sided turnbuckle multi-wrench

1up Racing have introduced the new double-sided turnbuckle multi-wrench that makes adjusting turnbuckles a breeze. One end is straight while the other is angled at 45 degrees to reach turnbuckles the straight side can’t easily access. Machined from aluminium and black anodised, the wrench features an ergonomic grip between the finger and thumb on both sides. In addition, a 3.75mm x 8mm opening in the centre offers an easy way to hold many popular on-road ball cups when starting to thread in a turnbuckle, with two Multi-Wrenches allow to tighten them all the way. 4mm openings at both ends fits many popular turnbuckles and the tool is available now.

View more images here