Red RC » Brand

February 13, 2019

Ruddog RR482 2.4GHz 4-channel FHSS4 receiver

Ruddog have introduced their all-new Sanwa-compatible RR482 2.4GHz 4-channel FHSS4 receiver. FHSS4 and FHSS3 capable the receiver is usable with the latest M17 and MT-44 transmitters but also older spec M12S and RS, MT-4 and even M11X radios. The receiver was track-tested over several month at national and international events, including high-class races such as the EOS, and it fully supports Sanwa’s SHR and SSR technologies, offering the same features and super-fast signal transmission as the original Sanwa receivers, making them a full-fledged replacement. The compact “antenna-less” receiver measures 23.6×18.6×28.3mm, it weighs in at 7g and it comes in a heavy-duty case that offers improved durability compared to standard Sanwa receivers.

View a list of the features and another image here

February 13, 2019

Redcat Gen7 portal axle kit

German Redcat distributor Absima has introduced a new Gen7 portal axle kit. The set is designed for the Everest Gen7 and features the same portal axles that are installed in the Redcat Gen8 Scout II scale crawler, but includes all the parts needed to easily install portal axles on the Gen7 Sport or Pro vehicles. This kit includes the front and rear portal axle, along with a moulded plastic plate so owners can mount the servo to the Gen7 chassis. The axles utilise Mod 1 steel gears, metal hex hubs and metal gear covers for durability as well as a CNC machined aluminium spool. The kit also includes a slipper clutch upgrade, with gearing change, intended for the Everest Gen7. Because of the additional gear reduction present in the portal axles, without a gearing change, the Everest Gen7’s top speed will be reduced by about 50 percent. This slipper clutch system features a lockout system, for those who decide they don’t want the possibility of their drivetrain slipping, but still want the gearing change.

View another image here

February 13, 2019

Klinik RC M3 thread repair kit

Coming from Klinik RC is a M3 thread repair kit for stripped out M3 threads. The kit includes inserts machined out of brass that are inserted in the drilled-out thread and that expand when the screw is installed. The knurls grab tight onto plastic and increases strength two to three times over plain screw threaded directly into the plastic. A dab of CA upon installation secures them even further. The set includes ten inserts and a 5/32 drill bit.

View another image here

February 13, 2019

Exotek EB410 3.4mm HD hinge pin set

Exotek have introduced a set of heavy duty 3.4mm hardened steel inner hinge pins for the Tekno EB410 and ET410 vehicles. The larger centre section helps prevent bent or busted pins while keeping the stock 3mm diameter at the ends in order to fit the stock inserts and while also only slightly enlarging the arm holes to maintain arm strength. The set, that is recommended for experienced hobbyists only, includes four hinge pins and a high speed drill bit to ream the arms to accept the larger hardened hinge pins.

View another image here

February 13, 2019

Shepherd introduce 2019 1/8th & 1/10th foam tyres

Shepherd have introduced their updated range of foam tyres for 1/8th and 1/10th scale on-road cars, featuring new rim designs. Starting with the 1/8th tyres, the pre-trued foam tyres come mounted on redesigned multi-spoke rims for increased strength and durability with the tyres offering overall improved trueness, handling and wear. As for the new 1/10th wheels, the rims used offer very moderate flex for increased traction while the inner portion allows for greater clearance with suspension components. Both rims will be used for the mandatory race tyres at the EFRA GP Türkheim as well as at the 1/10th scale European Championships at the same place.

View the 200mm wheels here

February 12, 2019

JConcepts Finish Line hooded sweater

Fresh for the new season of racing, JConcepts drops the latest shield racing logo on the fastest looking sweatshirt yet. The angled and distressed checkerboard design in the background represents the finish line and for any racer, getting across first is what matters. The new JConcepts logo pops with authority and with a racers lightning bolt separating the artwork, speed and quickness are always at the forefront of this design. The stealth black sweater is available in adult M to 3XL sizes.

View another image here

February 12, 2019

Xray XB2 rearward linkage alloy steering plate

Coming from Xray and made for the XB2 series of buggies is a rearward linkage alloy steering plate. CNC-machined from high-quality 7075-T6 aluminium and coming black anodised and with a white Xray logo, the plate is of an updated design that utilises rearward linkage mounting for a more linear and thus predictable steering reaction. The plate allows for easy steering Ackermann adjustment and it is usable for both the carpet and dirt specification kits.

Source: Xray [teamxray.com]

February 12, 2019

Schaffner Racing Products B6.1 shock tower plugs

Schaffner Racing Products have introduced their new front shock tower plugs for the Team Associated B6.1 buggies. 3-D-printed the plugs fir snuggly into the shock tower saver and prevent the unused upper shock mounting holes from clogging with dirt. Each package contains two sets of plugs to cover all standard hole positions and the plugs are available in black, blue or orange colour.

View more images here