Red RC » Brand

January 29, 2019

Xray XB8 series super-lightweight brake discs

Xray have introduced their new precision-ground super-lightweight brake discs for the XB8-based series of kits. Made from high-quality material the brake discs offer a super-low weight without sacrificing strength or durability while their vented design ensures consistent braking performance and less fading issues even in long mains or when running in high ambient temperatures. The precision-ground discs also operate vibration-free and they are usable on the XB8 buggies, XT8 trucks or GTX8 on-road cars.

Source: Xray [teamxray.com]

January 29, 2019

Exotek roll out new X1 & F6 optionals

Coming from Exotek are several new option parts for the Xray X1 and Team Associated F6 formula car kits. First up is a rear carbon fibre spool axle, usable on the X1 and F6. The extra lightweight carbon fibre and 7075 aluminium clamping spool set utilises a 1/4” rear axle design such as for the X1, F6 and also the Roche cars. The spool helps eliminate “diffing out” of the rear pod on extra high grip black carpet conditions and gives the car more corner exit speeds. The spool also greatly reduces the weight compared to a gear diff or standard ball diff for a cooler running motor and increased acceleration. The sturdy design eliminates any holes in the shaft for increased shaft durability and the spur gear mount keys directly into the supplied right side wheel clamp and makes for easier gear swaps as well. Also the right side wheel clamp uses 2-screws-style clamping which requires less force on the screws for better clamping force. The conversion requires a standard pan car ball diff type spur gear and the standard left side clamping hub.

Continue reading here

January 29, 2019

T-Works 8mm body post height adapters

Specially made for 8mm body posts are T-Works’ new aluminium body height adjusters. Machined from quality aluminium and coming black anodised, the parts help to easily fine-tune the body height simply rotating them and choose one of the many pairs of holes that allow to shift the body up and down by a couple of millimetres. The 4-piece set is usable with virtually all 8mm long-style body posts and it is available now.

Source: T-Works [rc-tworks.com]

January 29, 2019

MIP Unlimited Desert Racer X-Duty centre drive kit

MIP have introduced the X-Duty rear centre shaft kit for the Traxxas Unlimited Desert Racer. Made as a solid steel CVD shaft, the MIP X-Duty centre shaft is designed and built to handle any and all driving conditions. The shaft requires no modifications, simply install it in the UDR and it also utilises X-Duty couplings and hardware for easy rebuilding. The shaft is also tuned length to ensure the shaft never bottoms out when the chassis flexes resulting in a longer lasting shaft. The drive shaft is made so tough, it easily withstands 6S LiPo power and all rigours of bashing.

Source: MIP [miponline.com]

January 29, 2019

SMJ Ultra joint lubricant & grease

Coming from SMJ are their new Ultra joint lubricant and grease, two chemicals developed to reduce drivetrain wear. First up is the Ultra joint lubricant, a lower viscosity oil for all metal-to-metal combinations such as driveshafts and outdrives. The lube greatly reduces wear to cross pins, couplers, driveshafts and wheel axles and thanks to its low viscosity it still sticks perfectly to the parts, offering a free drivetrain feeling and improved drivetrain efficiency. Also new is the Ultra joint grease, a heavy duty product for driveshafts, cup joints and thrust bearings whose high viscosity allows for high adhesion and less chance of flinging away even under high loads or high RPM. Both products were developed in cooperation with full-scale car tuning brand G-max and they are available now.

View more images here

January 28, 2019

HPI Racing WR8 Flux Ken Block Ford Fiesta ST RX43

HPI Racing have announced the release of their new WR8 Flux Ken Block Gymkhana Ford Fiesta ST RX43 1/8th scale electric-powered RTR rally car. The colour-shift Fiesta ST RX43 racer starred in Gymkhana 8, Terrakhana, and Gymkhana GRiD and it is now also available in a 485mm long replica, capable of speeds near 100km/h. Underneath the replica Ken Block Ford Fiesta ST RX43 body, the WR8 Flux chassis is based on the HPI Bullet RC monster truck, which means it’s massively tough and can take a real beating on- or off-road. The car is powered by a 4000KV brushless motor and waterproof 3S-capable speed controller, delivering power through tough metal gear differentials and the fully ball bearing-supported 4WD shaft drivetrain of the Bullet monster truck. A rally-style suspension geometry, custom-designed shock towers and dampers, plus extra-thick sway bars ensure extra control that is further helped by semi-slick tarmac tyres and replica fifteen52 TurboMac wheels. The HPI Racing WR8 is crammed with awesome features that enhance its durability anywhere you want to take it, including a high ground clearance, skidplate, foam front bumper, shock debris guards, mud deflectors on the chassis and much more.

View a list of the features and more images here

January 28, 2019

SWorkz S14-3 Pro-composite option parts

Coming from SWorkz and made for the S14-3 buggy are several graphite-reinforced Pro-composite option parts. The range includes front and rear lower arms, the centre T-brace, side guards and battery plate, all of which are made of a harder material that allows to fine-tune suspension and chassis stiffness when running in high-grip or high temperature conditions. The front and rear arms are available separately while the centre T-braces are a full set.

View the other new parts here

January 28, 2019

Fenix 64dp Xray geardiff main gears

Fenix have announced the launch of new 70T and 72T 64 pitch main gears for the Xray pan car gear differential. The machined spur gears are a direct fit, they offer high precision and come with engraved size markings for easy identification.

Source: Fenix [fenixracingshop.com]