Red RC » Products

September 11, 2017

West Coast R/C Works BCE 1/12th body support

Coming from West Coast R/C Works is their new Black Carpet Edition front body support for most 1/12th scale pan car kits. The part was designed to prevent body scrub of 1/12th pan cars in high speed corners and on the straightway an issue that is generated by the air going over the body and bending the nose down until it touches the surface. The outcome of this is a reduced top and corner speed, and it even can lift the front wheels off the track. This is where the body support kicks in as it is designed to tackle this problem by supporting the nose of the body. It will reduce the body scrub to a bare minimum and allows to mount the body lower as before. The 1/12 body support is available in two versions, as 35 degree or 60 degree variant, and 3-D-printed from nylon. In 35-degree and 60-degree. The 35-degree version is designed for a body with a low angled nose like the AMR and the 60-degree version is made to support a body with a short nose like the BMR. The part is available in black and white from West Coast R/C Works’ Shapeways store and selected dealerships.

View another image here

September 8, 2017

Kyosho tease new off-road truck

Kyosho have been busy in the last couple of weeks, releasing teasing videos of forthcoming kits, one of which will be the re-release of the iconic Javelin 1/10th 4WD buggy. In a new video the Japanese company now allows a first sight on their “Project 2RSA” that appears to be some sort of a vintage baja truck given the front suspension design and old-school-ish body shell. No other information is available for now beside what is visible in the video.

Source: Kyosho [kyosho.com]

September 8, 2017

Capricorn TE-03 V4 big bore shock absorbers

Coming from Capricorn and made for their TE-03 electric touring car are the V4 big bore shock absorbers. The shock body and shaft are 2mm shorter than the previous version, while the pistons feature a lip on their inner lower side to avoid the suction effect when they hit the bottom of the case, resulting in a more linear response. Used in combination with specific shock towers, the V4 shocks are meant to be used on carpet as they should increase the car’s responsiveness.

Source: Capricorn [capricornrc.com]

September 8, 2017

Tekno reveal more EB410 details

Tekno have revealed more details of their forthcoming EB410 1/10th scale 4WD electric buggy kit. Lifting the hood the EB410 appeares to be a shrunken-down version of Tekno’s popular EB48 1/8th E-buggy kit with the centre diff being placed in a rear/centre position while the motor is sitting mid ship. The shorty battery pack found its position in the front, just behind the steering servo while receiver and speed controller are located on the passenger seat, just in front of the motor, leaving the rear section of the chassis pretty much free of everything and making for a somewhat extreme forward weight bias given this is a 1/10th 4WD buggy. The kit is scheduled for a release in a few weeks and for now you can find more images and information after the break.

View more images here

September 8, 2017

Kyosho Mad Crusher GP & VE 1/8th monster trucks

Kyosho America have released first information and images of the forthcoming Mad Crusher GP nitro and VE electric monster truck RTR kits. Both are based of the proven and lightweight Mad Force chassis with 5-link long stroke suspension and big bore shock absorbers. New scale wheels with high-grip all-terrain tyres make for go-everywhere capabilities and both trucks come equipped with 80’s style ultra scale body shells with chrome-plated grills, bumpers, mirrors and wiper blades. The trucks are set for a release in October.

View more images here

September 8, 2017

3DRC floating 25mm twin fan mount

Germany’s 3DRC have introduced their all-new twin fan mount for 25mm fan units. The 3-D-printed part is of a clamping design and it was developed to take two standard 25x25x10mm fans which makes for optimised cooling of the whole motor can when compared to single 30mm or 40mm fans while also ensuring a lower overall centre of gravity. The mount is best used in front of the motor and a large mounting patch ensures secure yet tweak-free mounting using high-quality double sided tape.

View another image here

September 8, 2017

Tamiya TRF419XR – Preview image

Tamiyablog have released a first blurry rendering of the forthcoming Tamiya TRF419XR touring car. The follow-up model of the TRF419X was developed with increased corner speed and steering response in mind and it will feature a redesigned 2.25mm carbon fibre chassis and 2.0mm upper deck for optimised chassis flex while the front and rear anti-roll bars finally received ball-raced mounts for a more precise action. Also included will be a new centre pitch stiffener to fine-tune chassis flex, a LF battery balance weight and also two sets of shock towers for standard and the included TRF super short big bore dampers.

Source: Tamyiablog [tamiyablog.com]

September 8, 2017

Imbue RC8B3 HRC C-block & MBX7 +4mm shock mounts

Coming from Imbue are new optional parts for the Team Associated RC8B3 and Mugen MBX7 buggies. Adding to the company’s lineup of kit-specific upgrades is the Team Associated RC8B3 high roll centre (HRC) C-block. Made from eye-catching black oxide coated brass, the Imbue C-block adds 20g of weight in the most critical of locations for 1/8th scale buggies. Extra material around the pills increase durability, and the slightly slimmed down profile adds to the different visual appearance of the part.

Continue reading here