Red RC » Products

August 25, 2017

Traxxas Fiesta ST Rally 1/10th scale RTR kit

Traxxas’ poplar 1/10th Rally ready-to-run car received a small update with the introduction of the Fiesta ST body shell. The car rocks a full-time 4WD low centre of gravity chassis with heavy duty gear differentials, oil-filled Ultra Shocks, long travel suspension and a powerful Titan 550-size brushed motor. Also included in the package are waterproof electronics for go-everywhere capabilities, as well as a 2.4GHz radio system for glitch-free operation. In the front the Fiesta ST body is mounted to the new high approach front bumper that gives increased ground clearance while grippy all terrain tyres help to take all sorts of tracks, from tarmac racing to backyard bashing. The kit is rounded out by an officially licensed Ford Fiesta ST body shell that sports a flashy paint job and a durable moulded rear wing.

View the features and more images here

August 25, 2017

Xtreme Aerodynamics polycarbonate spray paints

Coming from Xtreme Aerodynamics is their new range of polycarbonate spray paints. Coming in eleven different, mostly bright colours and in convenient 150ml cans, the paint is fuel-resistant and highly durable even when the going gets tough.

Source: Xtreme Aerodynamics [xtremeaerodynamics.com]

August 25, 2017

Prolix RC sidewall doctor gluing device

Prolix RC’s sidewall doctor is a high torque, full metal gear system for gluing the sidewalls of on-road RC tyres. The device can spin very slowly and the gear reduction has enough torque to keep spinning even when the CA tip strikes the tyre. Available are four different size circle adaptors to help mark out and precisely glue the tyres to the preferred glue height and they are available in three separate packages. The high grip option contains 59 and 60mm disks, standard includes 59.5 and 58.5mm disks, and complete option has all four. Each also comes with a paint marker and wheel adapters for Formula and 1/12th scale cars are available separately.

View more images here

August 24, 2017

Tekin RS Pro Black Edition ESC & Spec-R BL motors

Tekin have introduced their new RS Pro Black Edition brushless speed controller and Spec-R motors. Starting with the ESC, the RS Pro Black Edition was developed with ultra low internal resistance in mind to boost the performance of 1S and 2S-powered stock motors. This was achieved by utilising both hardware and software advances in combination with the Ultra Low Resistance ULR circuit design and ULR flex wires. The controller measures 24.5x33x17.25mm, it weighs in at 35g and it has no motor limit, however Tekin recommends their RSX controller for all modified applications as these setups tend to run at higher temperatures and so the billet housing and fan shroud on the RSX will provide more sufficient cooling.

Continue reading here

August 24, 2017

JConcepts 1/8th & 1/10th tyre balancer

Coming from JConcepts is their new tyre balancer suitable for 1/8th and 1/10th scale tyre and wheel combinations. The collapsible design rests in a lay-down configuration but pivots to a 90 degree stance and locks when in usable condition. The centre point of any balancer are the bearings, the free spinning action rests inside the hub design. The interchangeable thumb nuts for 1/10th and 1/8th wheel versatility are located on the main axle which can be moved from its home base position to its critical balancing position with ease. The upright is built in aluminium material, anodised blue, etched with instructions and chamfered for that extra lustrous look. The base of the item is built to protect, position and maintain a small footprint at all times. The base has four stand-off legs to hold a steady structure while a thumb screw secures the upright in either the up or down position. The all-aluminium and steel design comes set in a storage box for protection and travel convenience.

View more images here

August 24, 2017

Contact GT12 control tyres

Schumacher have introduced the new Contact GT12 control tyres. GT12 racing has become more complex over recent times with a myriad of different foam compounds to find the ultimate performance. Now Contact RC are taking it back to basics which made GT12 racing so successful. These new control tyres with an easily identifiable green stripe can be adopted at local clubs and larger events to have a more level playing field for all, and keep costs down. The control tyres are available in only one compound, 40 shore front trued to 44mm and 37 shore rear trued to 46mm, selected to give the perfect balance for the majority of conditions.

View the rear tyres here

August 24, 2017

Raceform Lazer differential rebuild pit

Raceform have introduced their new Lazer differential rebuild pit. Precisely machined from Plexiglas for a low weight and good durability the tool includes machined holes to hold the gear differentials of 1/8th and 1/10th vehicles during building, maintenance and setup. Tray compartments with milled slots make for easy pick-up of shims and small parts while the included inserts allow to reduce the diameter of the diff holding holes when working on smaller 1/10th diffs. The underside features an anti-slip padding and the pit is available in eight different colours to fit any colour scheme.

View more images here

August 24, 2017

Losi DBXL-E aluminium top plate & chassis braces

Losi have introduced new aluminium option parts for the DBXL-E kit in the form of a front top plate as well as front and rear chassis braces. Available separately and coming machined from high-quality alloy material the parts are specific to the DBXL-E and its chassis layout. The black anodised items feature machined silver edge details and they add strength and durability while offering improved visual appearance compared to the stock parts.

View the chassis braces here