Red RC » Products

July 5, 2017

Buri Racer E1 carbon fibre motor fan mount

Coming soon from Buri Racer and made for the E1 1/8th electric on-road car is a carbon fibre motor fan mount. The part is machined from high-quality carbon fibre and its mounting pattern allows to mount two 30mm or one 40mm or 50mm fan unit to ensure improved motor cooling when running low turn/high kv motors or when racing in hot ambient temperatures. The mount attaches to the rear motor mount and it will hit stores soon.

View the mount in combination with a 50mm fan here

July 4, 2017

Team EAM Graphene 6000mAh LiPo packs

Coming from Team EAM are the new Graphene 6000mAh standard and LCG LiPo battery packs. Both are built using high-performance 110C cells whose Graphene technology makes for a lower internal resistance and greater reliability. The packs perform better under load, making them ideal for both modified and stock racing and as an industry first, they sport balancer ports on both sided of the case. As for the weight, the 25mm standard battery weighs in at 308g while the 23mm LCG battery weighs in at 288g. Both make use of 5mm bullet type connectors, they sport side labels that will not be ripped off by battery tape and they are available now.

View the LCG pack here

July 4, 2017

Serpent introduce new SRX8E & Project 4X optionals

Serpent have introduced new optional parts for the SRX8E 1/8th E-buggy and the Project 4X touring car kit. Starting with the buggy related part, new are carbon fibre saddle pack battery plates for the optional saddle pack battery layout. Cut from 2mm carbon fibre the plates are an optional replacement for the standard mounts, offering improved stiffness and thus making a good alternative when more chassis rigidity is needed. The set is a direct replacement and it is available now.

Continue reading here

July 4, 2017

Tesla GT Spec 3.5cc nitro on-road engine

Capricorn have introduced their new Tesla GT Spec 3.5cc nitro on-road engine. The power plant features a redesigned piston and liner as well as upgraded bearings with the updates resulting in an improved power band, making the engine better suited for the heavier GT cars. Part of the new engine package is also a dual balanced and silicone-filled crankshaft.

View another image here

July 4, 2017

Vigor RC BD8 ball-raced anti-roll bar mounts

Vigor RC have introduced ball-raced anti-roll bar mounts for the Yokomo BD8 touring car. Machined from 7075 aluminium and coming black anodised and with silver edge details, the parts will directly attach to the car’s front and rear bulkheads and their design with ball bearings makes for greatly improved precision and smoothness, resulting in greater suspension efficiency. The parts also do away with the need to adjust the swaybar slop, making for more convenient car building, maintenance and set-up. The set includes four mount and bearing and it is usable with the original centre swaybar tube.

View another image here

July 4, 2017

Tamiya TT-02 Subaru WRX STI NBR touring car kit

Following yesterday’s semi-official announcement of the forthcoming TB Evo.7 competition touring car, Tamiya now also introduced a new entry-level kit. Coming soon is the Tamiya TT-02 Subaru WRX STI NBR 4WD touring car based on the simple and proven TT-02 4WD on-road chassis. It features a shaft-driven transmission and it comes with a highly detailed Subaru bodyshell including moulded mirrors and rear wing. The kit is rounded out by grippy slick tyres on dark multi-spoke rims and it will hit stores in August.

Source: Tamiya [tamiya.com]

July 4, 2017

RC Maker Awesomatix carbon tweak stick

New from RC Maker is the carbon fibre tweak stick for the Awesomatix A800 and A700 touring cars. Featuring a full carbon fibre construction, it is lightweight and disassembles for easy transportation. The tweak stick aids to pin the car down onto a flat surface with a single hand, whilst tightening the top deck screws with your other hand. Due to Awesomatix’ unique design not having shock towers, the tool utilises extension plates which exert even pressure onto the bulkheads left and right, front and rear. The design locates the extensions onto the bulkhead using locating lugs, which makes it quick, easy and accurate to use. Thick O-rings simply locate the extensions in place, which can be adjusted to suits the driver’s needs. Not requiring removal of anything to use, the strong carbon tube clears all spur gear sizes, as well as the antenna tube and belt tensioner. The tool fits both AM19-2 and AM19-4 upper bulkhead caps on the A800, and all top-deck configurations on the A700 without diff covers.

View more images here

July 4, 2017

Reedy 540-M3 12x5x24.2 modified rotor

Team Associated have introduced the new 540-M3 12.0×5.0x24.2 Mod Rotor, Reedy’s latest tuning rotor designed for modified on- and off-road racers. Using the rotor will smooth out the low-end throttle inputs while maintaining strong mid-range power and top speeds. When competing on small and/or low-grip tracks the reduction in initial power delivery will help to provide more consistent lap times.

Source: Team Associated [teamassociated.com]