Red RC » Products

February 17, 2017

TLR 8ight alloy bellcranks & spindle carriers

Coming soon from Team Losi Racing and made for the 8ight series of off-road kits are an aluminium steering bellcrank set as well as two front spindle carrier sets. Starting with the bellcranks, the parts were designed for the use with all 8ight series kits and they offer improved rigidity and durability which results in increased steering response especially on high-bite surfaces. The parts are machined from high-quality aluminium, they come hard anodised for wear and include a pair of pivot balls.

Continue reading here

February 16, 2017

3DRC RC10 5+5 front A-arm set

German brand 3DRC have introduced their new 5+5 front A-arms for the Team Associated RC10. Designed to offer a 10mm of additional track width and a 5mm longer wheelbase the arms also optimise the shock and suspension geometry. The parts are available in white and black colour through 3DRC’s Shapeways store now.

View more images here

February 16, 2017

HRC Racing TSW dual gold connectors & reducer tubes

HRC Racing have introduced the TSW Pro Racing series 4mm and 5mm dual bullet-type connectors and 5mm to 4mm reducer tubes. Starting with the connectors, they offer both a 5mm and 4mm end as well as a centre section bore for easy soldering. The connectors are ideal to create charge harnesses that allow to be uses with the old-style 4mm and the new 5mm hardcase battery connectors and they are gold-plated and come as pair or 10-piece set. Also new are gold-plated 5mm to 4mm reducer tubes for hardcase battery packs with 5mm connectors. Using them allows to utilise both 5mm and 4mm packs without having to swap the standard 4mm connector on charge harnesses or speed controllers.

View the reducer tubes here

February 16, 2017

Hobbywing QuicRun 3650 SD G2 brushless motor

Hobbywing have introduced the QuicRun 3650 SD G2 brushless stock motor. Using a sturdy 1-piece can with cooling openings and a fixed timing endbell, the motor is ideal for sanctioned racing classes. Pre-soldered 3.5mm bullet-type connectors make for plug & play ease and a high-precision balanced rotor guarantees smooth and linear power output. The sensored motor is available in a range of windings including 6.5T and 8.5T modified as well as 10.5T to 25.5T stock variants.

View more images here

February 16, 2017

Exotek 22 3.0 alloy steering set & brass RF weight

Coming from Exotek and made for TLR’s 22 3.0 series vehicles are an aluminium steering set and a RF brass LCG hanger. Starting with the steering set, it is designed to replace the standard parts on the 3.0 buggy with a more sturdy and precise affair. The new design adds four 3x6mm ball bearings and two crush sleeves for longer wearing, smoother and more precise operation. Included are aluminium bellcranks, an alloy steering rack and miscellaneous small parts and the set is usable on the 22 3.0, 22SCT 3.0/2.0 and the 22T 3.0/2.0.

Continue reading here

February 15, 2017

JConcepts Swaggers & Pin Downs stadium truck tyres

Coming from JConcepts are the new Swaggers and Pin Downs carpet and astro turf stadium truck tyres. Starting with the Swaggers, the 2.2″ front tyre has a multitude of heights and angular ribs for cornering speed, consistency and straight-line tracking ability. The ultra low-profile carcass keeps a truck very predictable and consistent in high-grip conditions while pointing the vehicle in the correct direction. Side-wall ribs in a circular pattern to the exterior of the tyre support high-grip racing and the tyre, made from medium soft material, includes open cell inserts for the best performance in a variety of conditions.

Continue reading here

February 15, 2017

Team Associated RC8B3 HRC arm mounts

Team Associated have introduced the high roll centre HRC suspension mounts for the RC8B3 series of kits. The parts offer increased ground clearance for greater durability, since the pivots sit 1mm higher off the ground. Additionally, they allow the racer to run a higher roll centre for increased stability on faster, high-grip tracks. Both the A and B mount are also narrower for added side clearance and durability. All of these mounts are made of blue anodised high-quality 7075-T6 aluminium, they fit the RC8B3 and RC8B3e and require the updated #81050 arm mount insert set.

View the other HRC arm mounts here

February 15, 2017

Ielasi Tuned Nitro.21 9WCE & Nitro.12 WCE engines

Ielasi Tuned have introduced two new engines, the Nitro.21 9WCE 9-port on-road and the Nitro.12 WCE 2.1cc touring car engine. Both are based on Novarossi power plants, they feature WIB ceramic and steel bearings, hand-tuned ultra light pistons, hand-tuned sleeves and crankshafts and they are assembled by Daniele Ielasi himself to ensure the best possible quality and performance. As usual all engines are built using modified and selected parts, allowing the customers to get their hands on the same engines as the factory team drivers.

View the .12 engine here