Red RC » Products

February 9, 2016

SMC Totemic competition brushless motors

SMC have introduced the Totemic 2-pole 540-size sensored brushless motor. The motor’s power band has been tuned to provide a very classic brushless feel with a smooth bottom end, hearty mid range and a brutal top end. Available in 9.5T to 5.5T variants, the 9.5T, 8.5T and 7.5T motors are equipped with 12.3mm diameter rotors, which testing proved to be the best suited for 2WD applications. The 6.5T and 5.5T motors are equipped with 12.5mm diameter rotors for 4WD applications where a harder hitting bottom end can be useful. The motor design has the stator wind only displayed on the stator through the side windows, allowing the stators to be changed and easily keep track of the motor wind.

View another image here

February 8, 2016

Futaba S9372SV high-voltage servo

Coming from Futaba is the S9372SV high-voltage standard size servo. Developed with 1/8th competition racing in mind, the servo features tough titanium gears, dual ball bearings, a torque of up to 24.6kg-cm and a speed of 0.06s while it is also programmable, with many different, adjustable parameter settings. With the S-Link servo programming software, users can customise servo travel, torque and smoothness to satisfy any application or personal preference.

Source: Futaba [futabarc.com]

February 8, 2016

Flash Point pre-oiled air filters & .21 exhaust gaskets

Flash Point have new pre-oiled air filters for a range of off-road vehicles as well as .21 exhaust gaskets available. Starting with the air filters, they come in packs of four and in a specified Mugen or a general variant with the latter being usable with 8ight, RC8B3 and D815 vehicles. The 2-stage filters come pre-oiled and they allow for exceptional airflow and maximum engine protection. Also new are the high temperature .21 exhaust gaskets that can be used where the tuned pipe manifold attaches to the rear of the engine. The gasket is also good for tuned pipe exhaust systems to seal the connection between the pipe and the manifold.

View the other new parts here

February 8, 2016

Xray XB2 1.5mm Lexan rear wing

Coming from Xray and made for the XB2 2WD buggy is an extra strong rear wing made from genuine Lexan material. The thicker 1.5mm polycarbonate material makes for increased stability, durability and lifespan of the wing and it can also improve traction due to more efficient aerodynamics, but at the same time steering might be slightly reduced. The wing fits the XB2 and all buggies with comparable wing mounts.

Source: Xray [teamxray.com]

February 8, 2016

Exotek Exo22SCT aluminium & carbon chassis kit

Exotek have introduced the Exo22SCT aluminium and carbon fibre conversion kit for the TLR22SCT and SCT 2.0. With its simple and efficient layout, the chassis design offers improved rearward weight positioning of the battery and electronics to better suit a variety of track conditions while also allowing for the faster and easier to drive side ways mounted shorty battery positioning. The chassis set includes the machined and black anodised 2.5mm 7075 aluminium main chassis, 5mm carbon side rails and a redesigned battery mount that also acts as the top deck. The increased chassis footprint allows for more electronic layout options and proper weight balancing while maintaining a low centre of gravity. The conversion kit is available soon and it requires a TLR22SCT or SCT 2.0 truck in mid motor configuration.

Continue reading here

February 6, 2016

SMJ BD7 foam bumper for Protoform LTC-R body

Speedmaster Japan have introduced a specially shaped foam bumper for the Yokomo BD7 touring car. The bumper is shaped to perfectly match the popular Protoform LTC-R as it supports the front of the body without the need to add foam strips as it is needed when running the body in a very forward-mounted position. Beside the BD7 the bumper will also fit SWorkz’ forthcoming CX11 touring car.

View more images here

February 6, 2016

STRC Slash limited edition black alloy parts

ST Racing Concepts have expanded their range of exclusive limited edition black anodised Slash 2WD and 4×4 option parts. Available as a very limited production run are now also CNC-machined aluminium skid plates, steering bellcranks, hub carriers, A-arms and the motor mount.

View the other new parts here

February 5, 2016

Reds Racing Durabell clutch bell

Reds Racing have introduced the Durabell 1/8th off-road competition clutch bell. Made of high quality steel and sporting a special coating treatment the teeth last longer compared to standard clutch bells, making for greater consistency and reliability. A special vented design also guarantees lower temperatures and improved clutch shoe engagement for a longer life of both the bell and clutch shoes. The Durabell is available in 13 and 14 teeth version only and it is suitable for Kyosho, Mugen, JQ, Xray, Associated, Hot Bodies, Serpent, and Xray but it does not replace Reds Racing’s standard 13 and 14 teeth clutch bells.

Source: Reds Racing [reds-racing.com]