Red RC » Products

February 5, 2015

LRP S10 Blast TC 2 Clubracer rolling chassis

LRP introduce the rolling chassis kit of their popular S10 Blast TC 2 Clubracer 4WD touring car. The pre-mounted chassis kit comes without wheels, tyres or bodyshell, making it a cost efficient entry level and club racer. The sealed shaft drivetrain keep dust and dirt away from the transmission gears, front CVD driveshafts and full ball bearings make for an efficient power supply and adjustable turnbuckles, threaded shock absorbers and front and rear anti-roll bars help to fine-tune the suspension. The kit is usable with all standard 190mm touring car bodyshells and touring car rubber tyres.

Source: LRP [lrp.cc]

February 5, 2015

Arrowmax 1/8th off-road setup board decal

Arrowmax have a plastic decal for 1/8th off-road setup boards available, large enough for the use with buggies and trucks. The smooth surface sports clean and accurate markings in a 1mm grid and the decal is highly liquid resistant as it is needed for nitro and electric off-road applications.

Source: Arrowmax [arrowmax-rc.com]

February 4, 2015

IGT8 Red 1/8th nitro GT car

American brand IGT8 introduce the IGT8 Red, an upgrade to their GT Pro kit. The “Red” will be released in March and no details on features and specifications are available yet but by the look of things the nitro GT racer will include a good amount of option parts such as red anodised aluminium suspension mounts, front C-hubs, upper steering plate, motor mount and chassis braces. More information will become available in time for the release.

Click here to view more photos

February 4, 2015

Serpent S120 LTR 1/12th scale kit

Serpent introduce the S120 LTR kit, the latest incarnation of the company’s popular 1/12th scale platform. The refined car features an updated front end with better adjustability and a new, innovation rear centre pivot system. Starting with the front end, the LTR features new upper arms and updated steering blocks that do away with the horizontal upper pivot ball in favour of a more standard looking system that allows for easier kingpin angle changes using inserts. Going to the rear end the LTR sports a totally new central pivot system that mounts to the rear upper brace rather than the main chassis as with most of today’s link-type cars. The design is meant to do away with binding issues while creating improved sidelink action. Along with the updated rear end design goes a new shape chassis and rear lower pod plate that allows to run the side springs in an inner or an out position. The kit is rounded out by a new centre shock bracket, new low centre of gravity rear pod brackets and it will become available by mid-February.

Click here to view more photos

February 4, 2015

Schumacher Wide Stagger Rib & Mini Pin 2 tyres

Schumacher introduce two new 1/10th off-road tyres, adding to their expanding range of tyres for multiple track conditions. Firstly the new 4WD wide front Stagger, this tyre has been developed for high grip astro and carpet surfaces and aimed at providing more grip whilst keeping stability associated with the staggered rib tyre. The 2.2 inch diameter tyre is suitable for 4WD and 2WD medium wheels and it is available in the Schumacher yellow compound for dry conditions and also inthe softer Silver rubber for damp and wet conditions. If you wish to skip that gnarly gluing job the yellow compound tyre is also available pre-mouted on the 4WD Flexlite 12mm hex wheel.

Click here to continue reading

February 4, 2015

Scorpion anti-slip foam pit mat

Scorpion introduce their new anti-slip pit mat that not only protects the pit table or workbench surface, it also keeps parts from rolling away thanks to the specially structured PVC foam material. The black, waterproof material is environmental-friendly, 2mm thick and it offers a cushioning effect so dropping heavy parts such as motors or battery packs not necessarily leads to havoc caused on parts or the working surface. The mat measures 750x820mm, it comes printed with yellow Scorpion graphics and it is available now.

Source: Scorpion [scorpionsystem.com]

February 4, 2015

Tamiya Dark Impact White Version kit

Coming this March is Tamiya’s Dark Impact White Version 4WD buggy kit. The standard, “dark” version of the shaft-driven 4WD buggy is around for some years now with the limited edition White Version sporting all-white plastic parts such as the chassis, gearboxes, suspension parts and CVA shocks. The DF-03 chassis kit will include a full set of ball bearings as well as front and rear ball differentials.

Source: Tamiya [tamiya.com]

February 4, 2015

Capricorn aluminium servo arms

Capricorn introduce new aluminium servo arms for 1/8th and 1/10th nitro and electric cars. The anodised levers are available in two different single and one dual arm designs for the steering and throttle/brake duties on EP and GP cars. The servo horn replace the standard plastic parts with more durable, rigid and precise parts and they come for the use with KO, JR and Sanwa or for Futaba/Robbe servo splines.

Source: Capricorn [capricornrc.com]