May 9, 2010

Edam Racing 1/10th foam tires

EDAM Racing 1/10th foam tires

Edam Racing have introduced a new line of 1/10th scale foam tires. Made using the best foam sheets available, they come pre glued on either white or yellow feather light rims. Available in 26mm front and 30mm rear versions for 200mm racing and 30mm front and 40mm rears for 220mm racing.

Source: Edam [edam.com.tw]


May 8, 2010

Much More 3500mAh 40C LiFe saddle pack

Much More 3500mAh 40C LiFe saddle pack

Continuing on with their LiFe pack releases, Much More have introduced this new 40C saddle pack. This high quality 3500mAh battery features a hard case for impact protection and with its saddle pack configuration is suitable for touring car and off road buggy. Cables  are supplied with pre wired Tamiya connectors, while the balancer cable uses JST-XH connector.

Source: Much More [much-more.co.kr]


May 8, 2010

CS Electronic LiFe RX packs

CS Electronic LiFe RX packs

CS Electronic have released 2 new LiFe packs to power your cars receiver. The 6.6v RX packs replace the standard 2/3A NiMh cells and are available in stick and hump pack configuration. Super lightweight and safe, they can be connected directly to your receiver without the need for a RX regulator and offer extremely stable power delivery.

Source: CS [cs-shop.de]


May 7, 2010

F.V.S.S. ceramic grease

F.V.S.S. ceramic grease

F.V.S.S. Racing Team have released a new ceramic grease for RC cars. Made with the best components, it is especially resistant to high pressure and doesn’t contain metallic elements which considerably reduces the deterioration of parts. It is also resistant to low and high temperatures, from -40°C to 1,400 °C, water resistant and best suited to lubricate the clutch thrust bearing and the clutch bell ball bearings.

Source: F.V.S.S. [fvssshop.it]


May 7, 2010

New approval listing for ROAR Sportsman class ESCs

ROAR

The ROAR Executive Committee, including the Electric Section Chairperson and advisory along with its Affiliate Manufacturers, have compiled a listing of electronic speed controllers (ESC) for use in ROAR Sportsman racing programs. Speed controllers eligible for Sportsman class racing must be capable of providing zero timing advance along with disabling advanced motor control functions. When the sportsman profile is enabled, it shall be indicated by a blinking LED while the ESC is armed and in neutral position. ESC manufacturer affiliates have been working with ROAR Section Committees to develop the sportsman ESC definitions and update firmware to meet the class standard. Firmware in the latest advanced speed control products must provide a profile, which allows its use to comply with Sportsman ESC profile requirements. Several affiliates are working on firmware updates which will allow additional ESC’s to be added. Members should contact the manufacturer directly for firmware updates or questions regarding any ESC they wish to have added to the ROAR Sportsman approved ESC listing.

More information can be found here.


May 6, 2010

Max Power 2010 buggy engine line

Max Power 2010 buggy engine line

Max Power is ready to release their new line of buggy motors. These all new engines include special off road features to make the motors easy to tune, stable, reliable and with increased parts life. The new features include a longer low range carburetor needle, new cooling head with max style cuts and a new sleeve with lower exhaust timing. Available in 4 different versions, twister 3 light, storm 5 light, thunder 5 booster and the extreme 8 light, all come with the silicone filled diamond shaft, turbo combustion chamber and the new carb and all but the twister 3 light come with 4 venturi inserts.

Source: Max Power [rcmaxpower.com]


May 6, 2010

Xceed Titanium wheel nuts & machined brake disk

Xceed Titanium wheel nuts & machined brake disk

New from Xceed RC are these titanium M4 wheels nuts. Mainly used for 1/10th scale racing, they sport a knurled flange to help keep the nuts in position. Also new for the 733 and the most popular 1/8th scale cars, is this super light and nicely machined brake disk. Made from a special type of steel to produce very smooth braking, they work well with Ferodo, teflon and many other brake pads.

Source: Xceed [xceedrc.com]


May 6, 2010

Serpent M hardness suspension parts

Serpent M hardness suspension parts

Serpent now offers their 733 wishbones in a softer but extremely durable composite nylon, called M for medium. With more flex than the H parts, which are best suited for very high grip an high temperature conditions, these new M versions will perform best in all other conditions. The uprights and steering blocks remain the same composite mix as before and the new parts are indicated with a M for easy identification. Available as separate parts and as full-set.

Source: Serpent [serpent.com]


Tonisport
Mibosport
LC Racing
VP Racing
SRT
Monaco RC
T-Works