Red RC » Products

April 10, 2009

Xceed C1 Charge & PDC-1 Power block

Xceed have released two new additions to their electronics range with the C1 Charger and PDC-1 power block. The high end C1 charger handles NiMh, NiCd, LiPo and Li-Ion with 3 different charging modes, peak charge, step charge and flex charge at 0.1A to 10A charging current. Discharging is also possible from 0.1A to 20A and additionally the charger has a USB port for charging your entertainment devices as well being supplied with LiPo balancer port. The simple to use interface is displayed on a 2 line back-lit screen and is controlled by 4 top mounted buttons. Also new is the PDC-1 which allows you to attach up to 5 devices to your power-supply. Each socket is secured with its own fuse and the socket will glow up with a colored light to show its in action, and four of the outputs have their own on-off switch as well.

Click here to see the PDC-1

April 10, 2009

Racers Edge 1/8 Hauler & Hobby Roller

New from Racers Edge are 2 new hauler bags for conveniently transporting your race equipment to the track. The 1/8th scale car hauler bag (above) will work great for 1/8th scale buggies and smaller scale R/C cars. It features 2 small parts boxes, 1 medium box, 1 large car box, smooth rolling wheels, advanced telescoping aluminum handle, 2 large pockets for setup boards and more and now features black corrugated plastic boxes. The top is large enough for two Plano boxes to hold your tools or parts, and now has a section of elastic rings for tool organization. The Monster Truck hobby roller features smooth rolling wheels, advanced telescopic aluminum handle, reinforced carrying handles and internal shelf. The lower deck dimensions are-24.5″ long, 18.5 ” deep, and 11.5″ tall. It easily accommodates the HPI Savage XL.

Click here to see the Hobby roller

April 10, 2009

Piktor Rush 2.2 Upgrade kit

French buggy maker Piktor have released a new suspension upgrade kit for their Rush 2, to upgrade it to version 2.2. Designed for the high American jumps, the kit comes with a full set of extra big bore shocks, 2 new aluminum shock towers, which are also available in carbon fibre as seen in the photos, and finally 4 aluminium shock supports for the lower suspension arms. This is a simple upgrade which gives the car a more conventional shock mounting setup compared to the cars normal lay down configuration. The kit will only be available as an upgrade for the Rush 2.

Click here for another photo

April 9, 2009

Hudy 1/10 Touring Set-up wheels

New from Hudy are these CNC-machined premium-quality aluminium set-up wheels for electric and nitro 1/10 tourin, which allows for perfect, precise and repeatable set-up adjustment and tweak correction. Precision-machined to exacting tolerances, each alu set-up wheel in a set is perfectly matched. When checking tweak on a rubber-tired touring car, using standard rubber tires typically gives non-precise and non-repeatable measurements. Rubber tires are never perfectly rounded, so when checking tweak one tire can lift earlier than another but this does not always indicate a tweaked car. Tire roundness and insert weight is different from one tire to the next. Also when checking tweak on a foam-tired touring car, the differences between tires are even greater than with rubber tires. Each foam tire has a different diameter after each run due to tire wear, making it impossible to check for tweak because the tires can give very misleading results. In this case the alu set-up wheels are the best tool for checking tweak.

Click here to see the wheels mounted

April 9, 2009

Hot Bodies DSJ-1SS & DSJ-2ST digital servos

As seen at the toy fair in February, Hot Bodies have released their digital servos, which combine speed, reliability and toughness in one highly efficient unit. Available in two dialled-in versions, both are very strong yet fast, but the DSJ-1SS is fastest with an amazing transit time of 0.06 seconds per centimeter of movement with a strength of 13kg per cm, while the DSJ-2ST is nearly as fast at 0.09 seconds per centimeter, but has a whopping 16kg per cm of holding power.

Click here to see the DSJ-2ST

April 9, 2009

Matrix GPR Class Foam tires

Following on from yesterday’s release by Team Titan of a body shell for the new GPR 230mm class, comes new tires from Italian company Matrix Racing Tires. Made using their usual high quality foam, these new tires have been fitted to 32mm wide front tires and 44mm wide rear tires, and come available in all the usual shores you would expect.

Source: Matrix Tires [matrixtires.it]

April 9, 2009

Xray Rubber Spec conversion set

Xray have released this rubber spec conversion set for the T2’009 and T2R Pro, that sets the motor position more forward without changes to the chassis. By having the motor more forward, it increases on-power steering and makes the car turn more easily and precisely. The set includes top-quality front & rear graphite upper decks, 38T composite solid axle, 38T diff pulley, and forward motor position front & rear belts.

Click here to see the motor position difference

April 8, 2009

Team Titan Blitz Lola VDS220 body

Designed for the 1/10th scale GPR class started by Kawahara, Team Titan have released this Blitz body, the Lola VDS220. Designed to easily fit the new wider cars that use the 200mm chassis but with 30mm wide front tires and 40mm wide rear tires, it doesn’t need any extra parts than that to convert it to the GPR spec car. Made from 1mm thick polycarbonate, it is 220mm wide on the front, expanding to 228mm at the rear and is supplied clear with decals, side stiffeners and rear trim strip.

Click here for another picture