Red RC » Products

July 17, 2019

RC Maker A800 MMCX Slimflex topdeck

RC Maker have introduced their new Slimflex topdeck for the Awesomatix A800X mid motor MMCX chassis. Designed to reduce the profile of the topdeck, it has been optimised to improve the flex characteristics in low traction asphalt and carpet conditions. It increases the overall torsional flex of the chassis both front and rear resulting in more overall grip. The flex can be altered by either using ST019 screw or removing it from the topdeck. Together with the use of the screws under the motor mount, owners can access a large range of flex characteristics, just like the standard topdeck, but with increased “overall” flex throughout the whole footprint. The rear brace is designed to act as a spring, restricting bulkhead flex at this point but not totally removing it like the standard topdeck. RC Maker recommend using their Med Flex Link, or Flex Dampener on the front of the front bulkheads to remove and excess “over-flexing” of the bulkheads. Additional flex can also be obtained by cutting the rear carbon tab on the topdeck with a Dremel, to increase the length of the flex point to further, increasing flex in the rear of the car. Recommended uses of the Slimflex topdeck include low to medium traction carpet with aluminium chassis, low to medium traction asphalt with carbon chassis and high traction asphalt with aluminium chassis.

View more images here

July 17, 2019

Kyosho Ultima RB7SS 2WD stock racing buggy kit

Kyosho have announced the soon release of the stock racing specific Ultima RB7SS 1/10th scale 2WD buggy kit. The buggy build on the proven RB7 but includes some useful optionals for the highly competitive 17.5T stock motor class such as a lightweight aluminium ball differential, aluminium driveshafts and alloy front wheel axles. Also included are a slipper eliminator hub for the spur gear, a 0.6mm lightweight body shell and a revised rear suspension geometry for optimised roll characteristics. However, all parts are compatible with the standard RB7, allowing for easy parts carrying and the ability to use the stock specific parts in the “modified” buggy. The kit is rounded out by a low-friction 48dp aluminium pinion gear, as well as X-Gear springs, diff and high-graphite grease. The kit is meant to hit stores this July.

View more images here

July 17, 2019

Team Associated 7.8×3.5mm blue aluminium washers

Coming from Team Associated are three new 7.8×3.5mm washers in 0.5mm, 1.0mm and 2.0mm thickness. The spacers are machined from high-quality aluminium and they come blue anodised for wear and looks. They work great as rear hub spacers – for adjusting the wheelbase – on the RC8B3 and RC8T3 series vehicles but are also usable on 1/10th scale kit. The 10-piece sets are available separately from now on.

View more images here

July 16, 2019

Samix Enduro aluminium centre driveshafts parts

Coming from Samix and made for the Element RC Enduro trail truck is an aluminium inner and outer driveshaft set. Machined from high-quality aluminium the outer centre driveshaft bodies and inner splines are direct replacements for the standard parts, improving rigidity and durability while adding visual impact. The combo sets include all needed parts to replace the inner driveshaft bodies and they are available in black, green or grey colour.

View another image here

July 16, 2019

Yeah Racing 2S balance charge lead

Yeah Racing have announced the release of their new angled 2S balance charge cable. Utilising all-black wires for a professional look, the harness also makes use of angled heavy duty connectors that ensure high durability and the ability to easily change the battery side connectors from 4mm to 5mm without tools. Included come a pair of 4mm and 5mm bullet-type connectors with the balance side being pre-wires with a 2mm bullet and an industry-standard 3-pin XH connector.

Source: Yeah Racing [yeahracing.com]

July 16, 2019

Leadfinger Racing B74 A2 Tactic body shell

Leadfinger Racing now offers a new look for the Team Associated B74 1/10 scale 4WD buggy with the A2 Tactic body shell. The lid not only adds a sleek new look to the ride, but is designed specifically by LFR while keeping the traditional racer in mind. First off, the windshield has been laid down for less rake and the cab pushed back to give the buggy more low profile styling. The combo gives the B74 a super slick and fast look that maintains a lower centre of gravity through out the entire car. Like the A2 Tactic designs before it, the top of the cab has an added roof vent. To help keep everything planted, the rear of the cab has the traditional LFR swoop that disburses air flow to the wing. Added downforce ailerons on the top rear of the side pods also help give the car a balanced feel during high speed straights, cornering and over all jump handling. The body comes in clear with window masks and stickers provided as well as two clear Tactic wings included.

View more images here

July 16, 2019

Avid 1/8th scale 1-piece carbon wing button

Coming from Avid is a 1-piece carbon fibre wing button for 1/8th scale off-road kits. The wing button is a nice alternative to the commonly used wing buttons and helps work as a template to mark the holes in new wings. Available models include the Team Associated RC8B3.1, HB Racing D819, Kyosho MP10, Mugen MBX8, Serpent SRX8, SWorkz S35-3, Tekno NB48.4, TLR 8ight-X, and Xray XB8‘19

Source: Avid [avidrc.com]

July 15, 2019

Protoform X-15 1/8th on-road body shell

New from Protoform and made for the demanding 1/8th IC Track class is the all-new X-15 body shell. The last four 1/8th IC On-Road IFMAR Worlds Championship winners have relied on Protofornm to finish on the top step of the podium. In their quest for a 5th straight, PF have developed the X-15 race body. The “X-15” name is legendary and carries with it an enduring reputation of innovation, sheer speed and record setting performance. The new body style has been exhaustively tested by Protoform’s world-class team of drivers and has proven to be a step forward in predictable handling and lower lap times. Many unique shapes and proportions have been developed during its evolution process including streamlined cockpit and never-before-seen shrouding around the engine area. These features are sure to make the body stand out at the track. The X-15 is Global Body Spec compliant and ROAR approved. Made in the USA from high-quality, super-durable polycarbonate, it is available in both Pro-Lite and Light Weight. Included with the body are universal stiffeners with hardware, a stylish decal sheet, and overspray film complete the package.

View more images here