Red RC » Products

February 22, 2019

Axon Impact Racing Dish touring car wheels

For those who are still gluing their own touring car tyres, Axon have announced the soon release of their Impact Racing Dish 1/10th touring car wheel. The rim is made of a new ABS resin material and compared to the Dynamic Racing Dish wheel, the Impact rim features a slightly different size which, in combination with the new material, will make for optimised tyre rolling motion and an overall improved car and steering feeling, making the rim ideal for high-traction racing conditions.

Source: Axon [team-axon.com]

February 22, 2019

Xray XB8 series medium rubber shock membrane cell

Xray have introduced their new medium hardness rubber shock membrane cell set for XB8 based buggies, trucks and GT cars. The special design of the volume compensator provides a smaller air gap compared to conventional rubber diaphragms, resulting in more consistent damper action throughout the whole run. The red medium hardness cells will also offer more rebound compared to the previously released soft set, making for improved traction on smoother surfaces. The membranes come in sets of four and they are usable for the nitro and electric variants of the XB8, XT8 and GTX.

Source: Xray [teamxray.com]

February 22, 2019

T-Works RC8B3.1 graphite centre gearbox plate

Coming from T-Works and made for the Team Associated RC8B3.1 is a graphite centre gearbox plate. Designed to replace the standard aluminium part, the plate will add looks and functionality and it comes including two metal bushings for a smooth support of the brake cams.

Source: T-Works [rc-tworks.com]

February 22, 2019

MIP 3.0mm ball end hex driver wrench & Speed Tip

MIP have introduced they new 3.0mm ball end hex driver wrench and Speed Tip tool. They allow to reach difficult angled screw heads and are designed to work up to ten degrees of angle. The super beefy ball end cut is designed to increase overall tool head strength and the ball end dimensions are optimised to increase tool head to screw head bite force. Beside the proven wrench MIP also offers the Speed Tip version which speeds up wrench time considerably thanks to fitting into most of today’s rotary tools.

View the Speed Tip here

February 21, 2019

Yokomo BD9 linear SLF front springs

Coming soon from Yokomo is their new line of linear SLF front springs for the BD9 touring car. Developed in cooperation with Axon, the springs offer a linear characteristic which will lead to a more aggressive steering feeling compared to the standard progressive front springs. In addition they are 1.5mm shorter, allowing for easier ride height adjustment when running smaller diameter tyres. The individually-marked springs come in 2.6 to 2.8 hardness and according to Yokomo they are also worth a try in the back of the car.

Source: Yokomo [teamyokomo.com]

February 21, 2019

Axial 1/18 Yeti Jr Can-Am Maverick X3 T 4WD

Horizon Hobby have introduced the new 1/18th scale Yeti Jr Can-Am Maverick X3 T 4WD brushed RTR off-road vehicle. The Yeti Jr RTR takes everything modellers admire about the 1/10th scale Yeti chassis and shrinks it down to 1/18 scale – then tops it off with a licensed Can-Am Maverick X3 body for a fun 4WD that anyone can handle. Out of the box, this tiny terror is ready for scale adventures. Before the Yeti, the only place to find an independent suspension with floating solid rear axle was in full-size off-road vehicles. Axial carried its advantages over into RC rock racers and crawlers. The suspension design give the Yeti Jr responsive handling, increased clearance, and improved stability at high speeds. Its included 380-size motor adds the perfect amount of speed and torque, controlled by the Maxxis Bighorn 2.0 radial tires, the Spektrum brushed speed controller and the Spektrum STX2 transmitter. The package is rounded out by a 7.2V 1300mAh NiMH battery pack, a USB charger and AA batteries for the transmitter, making the vehicle a true ready-to-run kit.

View a list of the features and more images here

February 21, 2019

HRC Racing 68110DMG digital standard size servo

HRC Distribution have introduced the HRC Racing 68110DMG digital standard size servo. Developed for 1/10th scale on-road and off-road classes, the servo features double ball bearings, sturdy metal gears and it comes with a heavy-duty 22AWG receiver wire. The servo’s waterproof case allows the use in unfriendly environments, making it ideal as a replacement for standard RTR kit servos.

View a list of the specifications here

February 21, 2019

Kyosho Turbo Optima 1/10th 4WD buggy kit

First seen at the recent Nuremberg International Toy Fair in Germany, Kyosho have now revealed more information on their forthcoming new re-release Turbo Optima 1/10th scale 4WD vintage buggy. Based on the iconic mid-1980’s Optima buggy, the original Turbo Optima back in the days featured race-proved optionals such as larger diameter tyres, larger volume shock absorbers, front and rear anti-roll bars as well as the 8.4V compatible Le Mans 240S brushed motor. Many of these features now also found their way into the re-release model that in addition sports a full assortment of gold-colour chassis and suspension parts, modern threaded aluminium shock absorbers, a slipper clutch, as well as newly designed 50mm/2.0” block tread tyres for improved traction. The Turbo Optima’s body shell was faithfully recreated and the updates, such as the 48 pitch drivetrain gears and the belt drivetrain, allow to use today’s powerful brushless motors and LiPo battery packs. The buggy is set for a release in March.

View a list of the key features and more images here