Red RC » Products

February 7, 2019

KO Propo RSx3-one10 Flection Type-T servo

KO Propo have introduced their new RSx3-one10 Type-T servo, specially developed for the use with Tamiya brushless speed controllers. The steering servo builds on the proven RSx3-one10 series, however a specially developed coreless motor makes for lower current consumption, ideal for speed controller with less powerful BEC systems such as Tamiya’s brushless ESC that features a 1.5A BEC system. The servo is aimed towards the use in Tamiya racing series where the Tamiya speedo is mandatory but it can be used with basically every other electronic speed controller. In addition the servo features five programmed settings, for high-grip asphalt, low-grip asphalt, low-grip carpet, Tamiya World Championship blue carpet and the Tamyia Kakegawa track, all of which are accessible using KO Propo’s HCS programming interface. To further make the servo stand out it features light blue case details and a black high-flex receiver wire.

View a list of the specifications here

February 7, 2019

Muchmore Impact competition LiPo battery packs

Muchmore have introduced three new standard size Impact Silicon Graphene series LiPo and LiHV battery packs. First up is the 8200mAh Impact Max-Punch FD4 7.4V LiPo pack that measures 138×46.5×24.8mm and weighs in at 323g. The 130C cells provide lots of punch for non-booted stock racing classes. Next up is the 6000mAh Impact LCG Max-Punch FD4 7.4V pack, again made of high-performance 130C cells but at 22.3mm of height it weighs in at 285g, making for an overall lower centre of gravity. The battery is aimed at blinky and boosted stock racing classes. Both packs features a flat voltage discharge curve and a super low internal resistance. Last but not least comes the Impact LCG HV FD4 LiHV 7.6V battery pack. Made of high-quality 130C cells and featuring a flat voltage discharge curve the 22.3mm tall battery weighs in at 283g and it can be charged to up to 8.7V, making it ideal for outlaw stock and modified racing.

View the other new battery packs here

February 7, 2019

Avid aluminium Kyosho wing washers

Avid have announced the release of their new aluminium wing washers designed especially for Kyosho’s 1/8th scale off-road wings. Machined from high-quality aluminium and coming anodised in red, blue or black, the washers will add a little spice to your ride.

View the colour options here

February 6, 2019

Rebellion-RC X1 optional arm mount plates

RC-Carbonstore have introduced new Rebellion-RC arm mount plates for the Xray X1 formula car. Designed especially for the multi-wheelbase chassis the optional plates provide more precise steering and more overall front side bite also when used with the original chassis. As usual the precision-machined and available in a variety of colours. Included with the plates comes an orange anodised alloy post to couple the steering bellcrank and the upper arm mount plates.

View more images here

February 6, 2019

JConcepts introduce new solid axle MT tyres

Coming from JConcepts are the Golden Years and JConcepts Tire, two new thread for solid axle monster trucks. Starting with the Golden Years tyres, the full-cleat tyre just looks so vintage, and JConcepts explored new heights and lug creation techniques to ensure the new tyre had the depth of a champion. The chevron pattern might look run of the mill, however, a lot of work has been placed into the tyre to allow the trucks to grip surfaces ranging from carpet, Astroturf and, of course, dirt. The size of the tyre has been altered to have a 1/10th scale large appearance that make vintage monsters, monsters. The round profile is there too, with included foam inserts and the design built into the carcass, the truck can have the bubbly look of the 1980’s. Sidewall lettering is very detailed on the Golden Years, allowing drivers to travel back in time, shine them up and display for the fans. The Golden Years are available in soft, blue compound and indoor racing, gold compound. The items are supplied with open cell, large profile inserts to cushion those hard landings and fill-up the carcass.

Continue reading here

February 6, 2019

Team Bomber YR12XX conversion kit

Coming soon from Team Bomber is the YR12XX conversion kit for the Yokomo YRX12 1/12th scale pan car kit. The set includes a new aluminium main chassis and rear lower pod plate with the design doing away with the standard bellcrank steering in favour of a conventional direct steering setup. The angled side links can be attached in two different positions to fine-tune steering and rear grip levels and also included are a new front body mount, new aluminium front suspension bulkheads as well as a floating steering servo mount. The kit is rounded out by a new upper damper plate that allows to run a more forward-mounted and shorter shock, a new rear chassis brace and new side tube dampers.

View more images here

February 6, 2019

Team Magic Seth 1/8th RTR desert truck

Following various teasers on social media Team Magic have finally unveiled their new Seth 1/8th ready-to-run desert truck. The 4-wheel drive truck is powered by a 150A waterproof electronic speed controller combined with a 6S LiPo-compatible 2200kV high-speed brushless motor. A 15kg Savöx steering servo supplies strong steering control and all electronic components are splash waterproof. The chassis is made of 4mm strong ultra lightweight aluminium and three differentials equipped with CNC-machined bevel gears supply the power to every wheel. Aluminium shock towers and rear stiffener reduce the chassis tweak as included anti-roll bars make for less chassis roll and adjustable rods for an easy setup. Flexible front and rear bumpers as well as a durable high performance rear wing help to absorb shocks and offer optimised aerodynamics for better traction. The truck is rounded out by realistic high performance tyres and a buggy body shell with durable roll cage.

View lists of the features and more images here

February 6, 2019

Infinity IF14 high flex top deck 2.0mm

Infinity has released an optional high flex top deck for their IF14 electric touring car. Narrower than the standard top deck, it has been designed to keep high rigidity during pitching while still maximising chassis flexibility. The deck becomes more flexible during the latter half of cornering making it also suited to low-grip tracks. The new top deck is machined from high-quality 2.0mm-thick carbon.

Source: Creation Model [creationmodel.net]