Red RC » Products

September 27, 2018

Schumacher Eclipse 2 LMP12 1/12th scale pan car

Coming from Schumacher is the new Eclipse 2 LMP12 kit for 1/12th scale pan car classes. After the successful reintroduction into LMP12 Racing with the Eclipse after a 35-year break, Schumacher offer the latest incarnation, the Eclipse 2. The car has been refined over two seasons of hard racing to provide drivers with a faster, more durable, easier to work on platform. The vehicle uses full carbon fibre chassis components, with high quality engineering polymer mouldings throughout, all refined for the upcoming carpet season.

content

September 27, 2018

Trinity X-Factor spec class brushless motor

Trinity have introduced their all-new X-Factor spec class brushless motor. Of a new design the motor weighs in at only 144g to 148g on average which was achieved by using only six short screws to mount the timing ring and locking end plate systems. X-Flow cooling openings further reduce the overall weight while adding a lot of airflow through the motor. Other features include a new composite sensor board, a 2-piece CNC-machined aluminium can, and 2mm ultra-low resistance solder tabs. A new stator design provides more efficient power and virtually no fade during a run. Available variants upon release will be a 10.5T, built with a TEP1119 12.5×25.5mm high torque rotor while the 25.5T motor uses a TEP1117 12.3×25.5mm rotor. In-between variants for other stock classes will become available at a later date.

View more images here

September 27, 2018

Schumacher Honeycomb 1/10th off-road tyres

Schumacher Racing have announced the launch of their all-new Honeycomb 1/10th off-road tyre. Designed especially for low grip surfaces, in particular the hugely popular Schumacher Worksop series in the UK where they race on an indoor sports hall surface. The tyre offers exceptional traction straight out of the packet, hard wearing for fair competition from run to run, throughout the race meeting duration. The tyre is available in yellow compound as 2WD front, 4WD front and 2WD/4WD rear variant both as tyre only and pre-mounts. For the pre-glued versions, these will come on white wheels with a specific blue closed cell foam insert, providing great support to the carcass of the tyre to prevent folding. These inserts will again provide consistent performance from run to run.

View the 4WD front and 2WD/4WD rear tyre here

September 27, 2018

T-Works M17 aluminium handle nuts

T-Works have introduced a set of aluminium handle nuts for the all-new Sanwa M17 transmitter. The decorative fasteners are machined from lightweight aluminium and they are available in blue, orange and red colour.

View more images here

September 27, 2018

Yeah Racing TT-02 RWD drift performance conversion

Coming from Yeah Racing and made for the Tamiya TT-02 entry-level touring car is a drift performance conversion. Designed to achieve a large steering angle, that is required for RWD drifting, the kit’s steering rack has been redesigned around the original chassis so it will be a drop in installation whilst achieving large steering angle with the upgrade steering rack. Combined with the highly adjustable suspension and steering geometry, owners will be able to tune the performance and behaviour to their liking. Adjustable rear universals have been included so that drovers can also adjust track width. Updated DSG dampers with longer ball cups allow for more droop and the possibility to tune the throw of the chassis when going into the corner. The suspension and steering parts are machined from high-quality aluminium and they come blue anodised and laser-engraved for looks.

View more images here

September 27, 2018

Team Associated RC8B3.1 Factory Team cross pins

Team Associated have introduced their new Factory Team cross pin set for the RC8B3.1 and RC8T3.1 kits. Designed for the V3 differentials to increase consistency, performance, and lifespan of the diff, the steel cross pin inserts reduce diff case deformation by increasing the contact area with the diff case, improving the internal gear mesh. The hard anodised aluminium cross pins are light and durable and they fit the RC8B3.1, RC8B3.1e, RC8T3.1 and RC8T3.1e.

View another image here

September 27, 2018

Blitz S100 190mm touring car body shell

Team Titan have introduced the new Blitz S100 190mm touring car body shell. The lid is of an up-to-date design for the highly competitive 1/10 electric touring class. Compare to all previous Blitz body shells, the S100 will provide more down force, which will work well in low to medium traction conditions. Pre-marked lines in both the front and rear wheel arches allows to easily and precisely mount the body in the preferred position. The rear wing comes with two different cut lines to adjust the rear down force and 20mm x 40mm side wing plates are also included. The S100 body shell is made from high quality clear polycarbonate and it comes including window masks, decal sheet and wing mount kit in standard 0.8mm, light weight 0.7mm and ultra light weight 0.5mm variants.

View more images here

September 26, 2018

Ultimate Racing M3X & M3R engine combos

Coming from Ultimate Racing are new engine and exhaust combos using the M3X and M3R engines. Both come including the Ultimate Racing 2141 pipe and manifold exhaust, the Compak clutch system with aluminium shoes and 1mm springs as well as 13T vented clutch bells and Ultimate Racing bearings. Also included is a suitable air filter with pre-oiled foams.

Source: Modelix Racing [modelixracing.com]