Red RC » Products

September 8, 2018

Arrowmax kingpin & steering block tool

New in Arrowmax’s honeycomb line of tools is this kingpin & steering block tool. It could perfectly align the kingpin threads in composite steering blocks. The new tool has a specially designed tip with an M3 thread on the upper end while the plain lower part slides into the steering block’s lower kingpin hole, ensuring the thread is cut at a perfect angle. By rotating the steering block the opposite thread can be cut. On top of having the two holes aligned, which will eliminate unwanted misalignment and friction, the tapping will also ensure easier assembly of the steering knuckle and C-hub area.

Source: Arrowmax [arrowmax-rc.com]

September 7, 2018

Kyosho Lazer ZX7 1/10th 4wd buggy

It didn’t take long after the initial teaser for Kyosho to release details and under the shell shots for their new Lazer ZX7 4wd platform. Sporting new front 2mm shorter gull-arm suspension which allows for more grip and better durability, updated front knuckle and new front hub carrier with adjustable insert of 7, 10, 13 degrees. The front suspension holders are wider, as is the rear side rear holder, the rear upper bulkhead has lowered hole locations for high grip surfaces and a new 7075 hard anodised aluminium chassis is .5mm thinner (2.5/2.0mm) allowing lighter weight with improved flex balance. A low profile chassis brace bar which sits on top of the chassis also improves flex balance. Finally a new floating steering servo mount, new bodyshell with centre fins and front and rear gear diffs with new centre slipper clutch complete the package.

View another image here

September 6, 2018

Tamiya TA07 MS 1/10th scale Touring Car

Following a teaser image all the way back in July, Tamiya have finally unveiled the TA07 MS. The TA07 Pro is a very popular chassis kit among club racers across the world and one of the most popular machines to use for the Tamiya Championship Series. This new version of the platform has been given a significant overhaul, endowing it with even greater potential, infusing with parts, designs and concepts from the top-level TRF419XR chassis to create a beast on the racetrack.

View more information here

September 6, 2018

MyLaps RC4 Pro transponder

MyLaps have introduced the RC4 Pro, what they claim is the world’s smallest transponder. The RC4 Pro features a shorter 8cm / 3.15in cable, ensuring a perfect fit every time and the pitch-black design gives any RC car that beautiful finish it deserves. The transponder comes in at only 3 grams, making it almost as light as a feather.

Source: MyLaps [mylaps.com]

September 6, 2018

Kyosho Lazer ZX7 – Coming soon

Kyosho are teasing the all new Lazer ZX7, the follow up to their successful ZX6 4wd buggy platform. No official details were released but we can expect a full introduction in the coming days.

Source: Kyosho [kyosho.com]

September 6, 2018

RSRC Products titanium machined screws

RSRC Products, the brand of multiple European Champion Reno Savoya, have released a new line of machined screws. Machined from grade 5 titanium they are 2 times lighter than stock steel screws and still as strong so can be used pretty much everywhere. Sporting a deeper print for hex-driver to avoiding stripping, they come gold coated in a wide range of sizes and are sold in a bag of 10.

View more screw versions here

September 6, 2018

Tamiya Comical Grasshopper

The original Grasshopper needs little introduction. It was a Tamiya legend which inspired legions of fans since the 1980s. For many, it was their very first introduction into the world of radio control assembly kits. The original Grasshopper is still among Tamiya’s best-selling kits to this day. Now the legend is re-imagined as the Comical Grasshopper, with a new body inspired by the famous original. The re-imagined body sits on a new and dedicated variant of the proven off-road chassis, the WR-02CB.

View more details & another image here

September 5, 2018

WRC GTX 1.4 aluminium rear CVD drive axle

New from WRC Racing for their GTX 1.4 is this aluminium rear CVD drive axle. CNC-machined from premium lightweight Swiss 7075 T6 aluminium and hard coated, they have been specially designed and produced for high-competition racing. Using a CVD helps enhance the performance of the car compared to kit standard dogbones by ensuring a smoother power delivery especially in cornering.

Source: WRC Racing [wrc-racing.com]