Red RC » Products

August 29, 2018

Team Associated B6.1 Factory Lite 2WD buggy kit

Coming soon from Team Associated is the B6.1 Factory Lite 2WD buggy kit, a lightweight variant of the popular B6.1 specially aimed at stock racing classes. Shedding over 45 grams of weight from the original B6.1D, the Factory Lite was designed to excel in classes requiring Spec motors, allowing the racer to take full advantage of the performance offered by the reduced weight. The Factory Lite sheds 30 of the 45 grams in rotational mass alone. Parts used to achieve the weight savings include the MIP PucksT system, MIP Pucks 7075-T6 aluminium outdrives, MIP Pucks Bi-Metal lightweight R-CVD bones (67mm), Factory Team direct drive system, and a lightweight body. All other features here taken over from the B6.1 kit, meaning full parts compatibility. The Factory Lite kit is set for a release in late September.

View a list of the features and more images here

August 29, 2018

JConcepts Stampede ’51 Ford Panel Grandma body shell

Coming from JConcepts is the 1951 Ford Panel Grandma body shell for the Traxxas Stampede monster truck. The “Grandma” was one of the most feared vehicles in monster truck racing during the late 1980’s. The 1951 Ford Panel truck was mean, a little green and always known for the most amazing single qualifying passes. JConcepts went to work creating the 1951 truck by once again starting from scratch to redefine a generation design from the “golden years”. The hood of the truck makes its point with a swooping radius and raised badging. The front fenders boast a large set-back to the hood which makes that undeniable stance as a 1950’s panel truck. The stand-up cab screams retro while the side windows are small but large enough for a scale driver to take a look outside. The body line along the side separates the sides to break-up the height between the fenders and top of the dome. The rear fender flare kicks-out in a vicious way to protect chassis components while giving the rear of the vehicle an almost car-like flare. The Ford truck has built-in running boards featuring a diamond-plate look which is found on the real monster while the wheel well openings are slightly enlarged to accommodate a large assortment of jumbo tyres and specifically, JConcepts’ Rangers and Fling King tyres. The front grille is made as a secondary part to get the utmost detail and 3D design which can be painted or decorated off the vehicle for the most convenience. After trimming, the front grille can be attached (using not included double-sided tape) into the recessed portion on the body as the finishing touch to this ultra tough and memorable piece. The body comes clear, including window masks and a decal sheet and it fits all Stampede-based Traxxas monster trucks.

View more images here

August 29, 2018

Kyosho Mini-Z MR-03 Evo – Coming soon

First information of Kyosho’s forthcoming Mini-Z MR-03 Evo 1/28th scale car have appeared on social media. The latest variant of Kyosho’s ultra-popular Mini-Z kit will sport an updated front end but the biggest news is the possibility to utilise optional plug-in receiver boards that allow to use Futaba and Sanwa transmitters in addition to the usual Kyosho and KO Propo units. The update further opens the market to more drivers which should be a real boost for the class. More information will become available in time for the release that is scheduled for December.

Source: RC Monkey [rcmonkey.jp]

August 29, 2018

PowerStar RS472HV Sanwa-compatible receiver

PowerStar have introduced their new Sanwa-compatible RS472HV receiver. Coming in the same case as the Futaba-compatible variant, the receiver is usable with transmitters such as the new M17 as well as the M12S, M12, MT-44, MT-4S, MT-S and MT-4. The full range 4-channel receiver measures 35.5×23.3×12.7mm, it is usable with 3.5V to 8.4V input and its firmware can be updated, making it future ready.

Source: PowerStar [powerstar-racing.com]

August 29, 2018

Ultimate Racing 5800mAh & 4000mAh LiHV shorty packs

Next in the line of Ultimate Racing’s new LiHV batteries are two 5800mAh and 4000mAh shorty packs. First up is the beefy 5800mAh variant that measures 95x47x25mm and that weighs in at 218g. Built from high-performance 120C high-voltage cells the battery is ideal for both Modified and Stock racing and its high capacity also allows to use it as a lightweight dual 2S setup in 1/8th buggies and on-road cars. Lighter and slightly smaller is the 4000mAh variant that measures 92x47x18mm, weighing in at 144g. The low centre of gravity pack also utilises 120C cells for high power and durability and it is the ideal choice for 1/10th off-road and on-road cars. Both of the above batteries are housed in protective hardcases and the utilise 5mm connectors.

View the 4000mAh pack here

August 28, 2018

JConcepts Ford F-250 Traxxas Stampede body shell

Coming from JConcepts is the Ford F-250 body shell for the Traxxas Stampede truck. The 1989 Ford body built and fit for the Traxxas Stampede offers first class styling and its exterior is accentuated with a smooth and moulded front and rear bumper. The must-have body of the 1980’s was featured on several of the most popular full-size monster trucks during this generation and always proved to be popular among the Ford enthusiasts and always wreaked havoc on the competition. The 1989 F-series carries over the same body style from the previous generation, yet sports a new rounded front clip that improves vehicle aerodynamics over its predecessors. The softened body lines around the rear of the bed and large fender arches around the wheel wells provides the scale monster truck look. The body features flush-fitting grille and headlights, wrap-around parking lights, a minimalist grille and an accurate and clean-looking Ford and JConcepts decal sheet.

View more images here

August 28, 2018

Yeah Racing aluminium parts trays

Yeah Racing have introduced their new aluminium parts trays in orange and blue colour. Machined from high-quality aluminium the trays offer three compartments to hold small parts during building setup and maintenance while two machined holes take ball differentials while filling them with fluid. The trays also sport 2mm, 4mm and 5mm holes to hold bullet-type connectors during soldering and a ruler allows to conveniently measure screw sizes.

View the blue parts tray here

August 28, 2018

Tamiya Toyota Gazoo Racing WRT Yaris WRC TT-02 kit

The latest body shell variant of Tamiya’s popular TT-02 entry-level 4WD touring car is the Toyota Gazoo Racing WRT Yaris WRC. The shaft-driven chassis sports a longitudinal layout with the battery on the left and the motor on the right, giving great stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers two different wheelbases, two ground clearance settings and two tread set-ups in addition to a range of ten possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal colour dish wheels and tread-pattern tyres make for a racy finish. The kit comes including a detailed Yaris WRC body shell and a huge decal sheet.

View more images here