Red RC » Products

April 17, 2018

VSR Products Team Orion Duo Charger stand

Coming from VSR Products and made for the popular Team Orion Duo Charger is a pair of stands to improve display visibility. Using the feet extensions in addition to the stock integrated feet allow the charger to stand at a more visible angle when sitting in the pit or shop area. The extensions slide over the stock stands and remain in place by the weight of the charger, allowing for extremely quick assembly and tear-down. The 3-D-printed parts are available now.

View more images here

April 17, 2018

Yeah Racing 20mm offset hex adapter set

Yeah Racing have introduced a set of 12mm wheel hex adapters with 20mm offset that is suitable for most 1/10th crawlers and trail trucks. The adapters are machined from high-quality aluminium and allow to substantially widen the track width for increased stability and less chances to roll the vehicle in heavy terrain. The set is available in black or red anodising and it included four adapters, four locking posts and four set screws.

View another image here

April 17, 2018

T-Works manifold supports

T-Works have introduced their new manifold support for a range of 1/8th off-road vehicles. The Type A support is 10.5mm tall and usable with kits such as the Kyosho MP9 TKI2 to TKI4, JQ Racing’s THE Car Black Edition, the HongNor X3 GT/X3 and Evo/X3 as well as the HB Racing D817T, D817 Ver.2, D817 and D815. The Type B 7mm support is usable with the Mugen MBX8 buggy exclusively. Using the manifold support ensures the exhaust system will move less when going over rough parts of the track or when bottoming out after landing a jump, which results in a lot less stress on all exhaust and engine components and thus improve longevity. The supports include suitable mounting hardware.

View more images here

April 17, 2018

Exotek EB410 aluminium steering crank set

Coming from Exotek and made for the Tekno RC EB410 buggy is an aluminium steering crank set. The reinforced 7075 alloy design eliminates the problem of the hex bearing posts stripping in the plastic cranks, allowing for easier maintenance and disassembly and the set includes steel bearing posts that doesn’t mushroom when assembled which also makes for easier bearing removal. The steering cranks come in a special glossy navy blue anodising to match the remainder of the car’s optionals and they are compatible with both the stock and the Exotek steering rack.

View another image here

April 16, 2018

Yeah Racing M07 alloy arm mounts & heat sink

Coming from Yeah Racing and made for Tamiya’s M07 Concept M-chassis kit are new aluminium rear arm mounts and a motor heat sink. Starting with the rear arm mounts, the parts are of a modified design with suspension ball inserts to prevent the assembly from binding when the arms sit at an angle. Included are four arm mounts, pivot balls and an assortment of shims to fine-tune the toe angle. Also new is a motor heat sink in blue anodising. As the motor of the M07 sits wrapped within the chassis the heat sink, that is connected to the motor plate, will greatly improve heat dissipation and thus the performance and lifespan of the motor.

View the motor heatsink here

April 16, 2018

Arena 1/10th touring body trim block

Arena have introduced a body trim block for 1/10th touring car body shells. The 3-D-printed tool was designed for the use with a Zebra fine pens and similar fine liners and its design allows to conveniently draw lower body trim lines at heights of 5.5mm up to 7.0mm by simply flipping the block.

View another image here

April 16, 2018

T-Works MP9 aluminium shock stand offs

Coming from T-Works and made for the Kyosho MP9 TKI4 and TKI3 series of buggies are aluminium shock stand offs. The parts are machined from aircraft-grade 7075-T6 aluminium and will reduce the overall weight while lowering the centre of gravity. The stand offs come in sets of four including suitable screws.

Source: T-Works [rc-tworks.com]

April 13, 2018

UREE B6.1 aluminium waterfall & pitch damper

UREE from Japan are currently working on an aluminium waterfall and pitch damper set for the Team Associated B6.1 buggy. The waterfall will be of a slim design to take an optional slim fan unit in order to improve motor cooling while the upper pitch damper improves drivability in a range of track conditions. No word yet on a release date but we are keeping you posted.

View another image here