October 23, 2017

Arrma Kraton 6S BLX 2018 1/8th speed monster truck

Arrma have upgraded their popular Kraton 6S BLX 1/8th electric speed monster truck with the 2018 variant sporting some subtle updates to further up performance and durability. The ’18 variant features revised transmission housings and a redesigned servo mount whose added material reinforces the part’s structures for improved durability while the safety battery mount incorporates adjustable hook and loop straps and wire guides to ensure the battery and wires stay where they belong. New shock cap protectors prevent damage to the upper parts of the shock absorbers, a larger RC box now takes larger aftermarket receivers if needed, and the 2050kV motor and 150A speed controller combo makes for top speeds of over 95km/h. The ready-to-run set is rounded out by a Tactic 2.4GHz radio system, dBoots multi-terrain tyres and a pre-decorated body shell in two colour schemes.

View more images here


October 23, 2017

T-Works MTC1 carbon fibre replacement parts

T-Works have introduced a full range of carbon fibre parts for the Mugen MTC1 1/10th electric touring car kit. Available are a 2.2mm chassis, 1.6mm or 2.0mm 1-piece top decks, 1.6mm or 2.0mm split front and rear upper decks, a motor mount plate, the front bumper plate as well as front and rear shock towers. Also coming is a floating servo mount plate. All parts are direct replacements and they are available now.

View more images here


October 23, 2017

Contact RC LMP12 control tyres

Schumacher have introduced the Contact RC LMP12 control tyres. Available in the popular and hard wearing ‘A’ foam with 32 shore hardness for the front and 30 shore for the rear, the tyres sport an orange stripe for easy visual inspection, making it an ideal control wheel for clubs and racing series. The front tyre comes trued to 44mm while the rear tyre is cut to 46mm.

View the rear tyres here


October 23, 2017

Imbue V4 baffled brass shock pistons

Coming from Imbue are the V4 baffled brass shock pistons for 1/8th off-road vehicles. The patent pending pistons offer an innovative design that allows to fine-tune the shock package using interchangeable shims. The 16mm diameter pistons are machined from high-quality brass material and include medium and high pack baffles with the overall design allowing for a very progressive shock action and a compression speed depending pack which will result in increased car control, saver landings and an overall easier-to-drive-hard-car especially in low traction and rough track conditions. The sets include four pistons, they come as 5-hole 1.45mm and 8-hole 1.15mm/1.35mm variants and are available for Xray, Kyosho, JQRacing, Team Associated, Tekno, Mugen MBX7 and HB Racing D8 series kits.

View the 8-hole pistons here


October 22, 2017

BMT 984 hard compound suspension arm set

Italian company BMT has introduced a hard suspension arm set for the 984 1/8th on-road car. Moulded from a harder compound the arms offer increased stiffness compared to the standard parts which results in improved handling and precision when running in high grip and/or high temperature conditions.

Source: BMT [bmt-team.com]


October 22, 2017

Mugen MTC1 Multi Work Board

Mugen Seiki Europe have introduced their new MTC1 Multi Work Board. Based on 4TheTop’s GeometX board, the multi-functional board offers an embedded camber gauge and it is of a new honeycomb design for a low weight and high stability. It measures 430x290mm, it can be used as work and precision setup board and it comes with a MTC1 print, a rubber cover mat and a carrying bag. The bottom side, with machined pockets and measuring gauges, allows for a tidy workspace during building, setup and maintenance. The limited edition board is available now.

View more images here


October 22, 2017

Motiv Long Use 2400mAh TX & RX LiPo battery pack

Coming from Motiv is their new Long Use 2400mAh transmitter or receiver LiPo battery pack. Of a straight-type design the battery measures 83x30x16.5mm and it weighs in at 80g. The high capacity cells used to built the pacl ensure runtimes of over an hour in nitro vehicles and multiple hours in transmitters. The 7.4V LiPo pack comes pre-soldered with an industry-standard balancer and universal power connector.

Source: Motiv [motivrc.com]


October 20, 2017

JConcepts B6 Roller Coaster chassis brace

JConcepts now offers a new 3-D-printed chassis brace for the Team Associated B6 chassis, called the roller coaster brace. Available directly through Shapeways, the uniquely shaped and designed brace offers flexibility fore and aft as well as side to side. The part fits directly into the B6 vehicle with laydown style transmission and installs using the standard hardware.

Source: JConcepts [jconcepts.net]


Tonisport
Mibosport
LC Racing
VP Racing
T-Works