October 2, 2009

Racers Edge SC RaceCase Transporter bag

Racers Edge SC RaceCase

New from Racers Edge, the SC RaceCase was inspired by the emerging Short Course class of vehicles, but its capacity and design reach far beyond. With the optional mid-deck installed the case can carry two on road sedans up to 200mm and this would also include any minis or smaller, like HPI Cup Racer sedans. Once the mid-deck is removed the RaceCase can transport an 1/8th scale buggy with the tires and wing on, comp and scale crawlers, 1/10th scale off road trucks and buggies, and of course Short Course trucks like the Traxxas Slash and Team Associated SC10. It will also carry the 1/8th scale versions of this class like the Team Associated RC8. An integrated radio compartment offers easy transmitter storage, or extra room for tires, tools, or whatever else you can think of. There are also two external pockets with tough zippers for extra storage, while reinforced carry handles in two locations offer comfortable carrying positions no matter what you’re transporting. The shoulder strap also offers a hands free carrying position for the ultimate in comfort and convenience.

Click here for more pictures of the case


October 2, 2009

Racers Edge SC RaceCase Transporter bag

Racers Edge SC RaceCase

New from Racers Edge, the SC RaceCase was inspired by the emerging Short Course class of vehicles, but its capacity and design reach far beyond. With the optional mid-deck installed the case can carry two on road sedans up to 200mm and this would also include any minis or smaller, like HPI Cup Racer sedans. Once the mid-deck is removed the RaceCase can transport an 1/8th scale buggy with the tires and wing on, comp and scale crawlers, 1/10th scale off road trucks and buggies, and of course Short Course trucks like the Traxxas Slash and Team Associated SC10. It will also carry the 1/8th scale versions of this class like the Team Associated RC8. An integrated radio compartment offers easy transmitter storage, or extra room for tires, tools, or whatever else you can think of. There are also two external pockets with tough zippers for extra storage, while reinforced carry handles in two locations offer comfortable carrying positions no matter what you’re transporting. The shoulder strap also offers a hands free carrying position for the ultimate in comfort and convenience.

Click here for more pictures of the case


July 22, 2009

Racers Edge Mini Edition 1800mAh LiPo pack

Racers Edge Mini Edition 1800mAh LiPo pack

Racers Edge have released their new Mini Edition 1800mAh LiPo battery which features 3.5mm bullet ports, and comes with a true Traxxas HC connector wire set, complete with Align style balance plug. Packing 30C for maximum punch, and a hardcase for the ultimate in battery protection, this pack is a direct fit in the new Traxxas 1/16th scale E-Revo and Slash trucks as well as any other mini with similar dimensions.

Source: Racers Edge [racers-edge.com]


July 22, 2009

Racers Edge Mini Edition 1800mAh LiPo pack

Racers Edge Mini Edition 1800mAh LiPo pack

Racers Edge have released their new Mini Edition 1800mAh LiPo battery which features 3.5mm bullet ports, and comes with a true Traxxas HC connector wire set, complete with Align style balance plug. Packing 30C for maximum punch, and a hardcase for the ultimate in battery protection, this pack is a direct fit in the new Traxxas 1/16th scale E-Revo and Slash trucks as well as any other mini with similar dimensions.

Source: Racers Edge [racers-edge.com]


July 15, 2009

Racers Edge 1 degree Associated rear hubs

Racers Edge 1 degree Associated rear hubs

Racers Edge have released their new 1 degree rear toe in aluminium rear hubs to fit the Associated B4, B44, T4, and SC10. Designed after the stock B44 4wd buggy hubs but with a larger outside bearing for increased performance and bearing longevity, a setscrew holds the hingepin in place with access from the bottom, while four possible vertical ball stud locations allow for increased setup adjustments. Available in a hard anodized silver color, CNC machined for accuracy, and laser engraved with degrees and L or R for left or right sides.

Source: Racers Edge [racers-edge.com]


July 15, 2009

Racers Edge 1 degree Associated rear hubs

Racers Edge 1 degree Associated rear hubs

Racers Edge have released their new 1 degree rear toe in aluminium rear hubs to fit the Associated B4, B44, T4, and SC10. Designed after the stock B44 4wd buggy hubs but with a larger outside bearing for increased performance and bearing longevity, a setscrew holds the hingepin in place with access from the bottom, while four possible vertical ball stud locations allow for increased setup adjustments. Available in a hard anodized silver color, CNC machined for accuracy, and laser engraved with degrees and L or R for left or right sides.

Source: Racers Edge [racers-edge.com]


June 17, 2009

Racers Edge 30C 5200mAh LiPo pack

Racers Edge 30C 5200mAh LiPo pack

Racers Edge announce the release of this 30C 5200mAh LiPo battery with TRX compatible plug. This hard case 3S 11.1V battery offers superior voltage and long run times and with its dimensions, 47 x 138 x 38.3mm, make it the perfect fit for any Traxxas Stampede, Rustler or Bandit using the battery expansion kit. This pack is also a great option for 1/8th scale electric buggies, with plenty of voltage and a great 30C power rating. It uses the same balancing connection as Align or Electrifly chargers and come with a one year warranty.

Source: Racers Edge [racers-edge.com]


June 9, 2009

Racers Edge Alu Rear Hubs for Associated chassis’

Racers Edge Alu Rear Hubs for Associated chassis'

Racers Edge have developed these new aluminium rear hubs to fit the Associated B4, B44, T4, and SC10. Based on the stock B44 4wd buggy hubs, they have a larger outside bearing for increased performance and bearing longevity, while a set screw holds the hingepin in place with access from the bottom. With four possible vertical ballstud locations for increased setup adjustments, these blocks are designed to add 1/2 degree rear toe in. Available in hard silver color, they have been CNC machined for accuracy, and laser engraved with degrees and L or R for left or right sides.

Source: Racers Edge [racers-edge.com]


Mibosport
TargetRC
VP Racing
T-Works