Red RC » Reedy

August 29, 2014

Reedy WolfPack Gen. 2 LiPo batteries

Reedy release the next generation of their popular WolfPack LiPo battery packs featuring increased capacities for even longer runtimes and more overall power. Coming as 7.4V variants with 3300mAh to 7500mAh capacity, as 11.1V 4500mAh as well as 14.8V 4000mAh and 5400mAh pack, all batteries features Reedy’s moulded hardcase for maximum crash protection in sizes that fit the most popular car configurations. Wires now exit the case through a rubber gasket which protects the wire’s insulation while helping to prevent moisture from entering the case. High-quality cell manufacturing and construction techniques result in reliable operation and maximum cycle-life. The Gen. 2 LiPo batteries come equipped with beefy silicone wires and a reliable, low-resistance T-plug connector. An integrated balancing harness with a XH connector is included.

Click here to view the other new batteries

August 6, 2014

Reedy Vintage T-shirt

You can now wear a piece of RC history with this Vintage Reedy T-shirt. The light blue 100 percent cotton shirt and the front and back designs faithfully reproduce a 1981 two-color period piece that the race team wore proudly at the track. The shirt is available in small to XXX-large sizes.

Click here to view another photo

June 20, 2014

Reedy 2100mAh LiPo RX/TX battery pack

Team Associated introduce the new Reedy 2100mAh LiPo battery pack for receiver and transmitter applications. Measuring 86.5×30.5×16.5mm the pack mimics the dimensions of a NiMH straight pack and it is usable as receiver battery pack in nitro on-road and off-road cars as well as to power transmitters that accept 2S 7.4V batteries.

Source: Team Associated [teamassociated.com]

June 11, 2014

Reedy 5000mAh 65C 7.4V LiPo battery pack

Reedy introduce their latest competition LiPo battery pack in the form of this 7.4V 5000mAh 65C pack. Built from lightweight high-performance cells the pack weights in at only 276g allowing to achieve a better left-to-right balance while offering the needed voltage for stock racing and modified classes alike. The hardcase pack sports standard 139x46x25mm dimensions, it is 2C chargeable and makes use of 4mm bullet-type connector tubes.

Source: Team Associated [teamassociated.com]

June 11, 2014

Reedy 5200mAh 50C square LiPo battery pack

After introducing the first “square” LiPo battery pack with the 5700mAh 65C version, Reedy now also offers a 5200mAh 50C variant. Built from lighter and slightly lower power 50C cells the pack is ideally suited for all applications that call for easier car control. Additionally, the reduced weight of of 261g makes it easier to attain the minimum legal weight while aiding in balancing front/rear weight distribution. The pack is equipped with dual 4mm sockets and a 2mm balance port.

Source: Team Associated [teamassociated.com]

June 1, 2014

Reedy all-in-one balance charge leads

Team Associated introduce three new Reedy all-in-one balance charge leads for LiPo battery packs. First up are two 1S-2S leads usable for standard and saddle packs. They are available with 4mm or 5mm battery connectors and come with a saddle pack clip for the jumper wire. Each harness includes a port for the balance connector to be inserted when charging 1S batteries. This 1S connection provides more accurate voltage readings, which results in a better quality charge but the feature is not compatible with all chargers. For those who are using Reedy’s unique 4S battery, a separate charge harness has been created specifically for it as it feature three 2mm bullet-type connectors for the balance duties. All three harnesses come with 12-gauge wires, 4mm charger inputs, and an XH balance plug. A length of 55cm provides pit area flexibility and enough slack to charge conveniently inside LiPo safety bags.

Click here to view the other new charge leads

May 14, 2014

Reedy 2S charge harness for 5mm connectors

Available now is this Reedy 2S charge harness for all 2S LiPo battery packs with 5mm bullet type connectors. The harness comes pre-assembled with 5mm gold-plated male plugs, and a JST-XH balancer connector. The 12AWG silicone wires can be equipped with a plug compatible to your favourite charger.

Source: Team Associated [rc10.com]

November 28, 2013

Reedy pro silicone wire & low-profile connectors

Team Associated introduce the new Reedy pro silicone wire and low-profile bullet-type connectors. Starting with the wire, it was developed to be lightweight and highly flexible while offering efficient current flow at the same time. The thin silicone insulation is yet sturdy enough to withstand the rigours of racing and the wire is available as 1 meter long 12AWG/4mm, 14AWG/3mm and 16AWG/2.7mm variant in any colour you want – as long as it is black. Also new are 14mm long low-profile bullet-type connectors. Coming in a standard 4mm and also new-type 5mm variant the flat top plugs are pre-shaped for easy soldering. They are silver-plated for a low resistance connection and the will become available as pair or 10-piece pack. Last but not least in the line of new electric accessories is a set of coloured shrink tube for motors and speed controllers. The kit contains three pieces each of black, red, blue, orange, and yellow shrink tubing.

Click here to view the other new parts