June 7, 2018

Reedy roll out new Wolfpack LiPo battery packs

Coming from Reedy’s Wolfpack intermediate-level series of battery packs are three new offerings. First up is the 2100mAh 30C HV pack with dimensions of 87.2×32.2×18.4mm. The hardcase battery weighs in at 96g and utilises 3.5mm sockets. The second new battery is a 1600mAh offering built from 30C standard voltage cells. The softcase pack measures 88.0×29.9×16.5mm, it weighs in at 87g and comes pre-soldered with a T-plug connector and JST XH balancer port. The two above batteries are ideal especially for small-scale vehicles while the third new pack, the Pro SB 2100mAh 20C 4S battery is the ideal power source for starter boxes. The softcase pack offers a small footprint and a light weight, making it easier to transport and handle starter box. The battery measures 106.5×34.1×26.5mm and it weighs in at 210g.

View the other battery packs here

June 6, 2018

Reedy HV 30mm motor cooling can

Coming from Reedy is their new high-voltage compatible 30mm motor cooling fan. It comes with a handy 195mm extension and is simple to install by plugging directly into the receiver where it operates off BEC voltage. Because it has HV capability, it can also be soldered directly to ESC battery terminals to achieve 24000 RPM and maximum cooling. Installing in the vehicle is as easy as double-sided tape or fitting it to a fan mount or heat sink.

Source: Team Associated [teamassociated.com]

April 2, 2018

Hiro Seiko brushless motor alloy screw sets

Made for 540-class brushless motors such as the Muchmore Fleta ZX V2, ORCA Blitreme or Ready S+Plus and Sonic 540-M3 are new aluminium screw sets from Hiro Seiko. They are available in a total of six colours and while saving some weight they also raise the top RPM by about five percent as they have no influence on the magnetic field of the motor. The screws are made of aircraft-grade aluminium and they are available in purple, dark blue, light blue, orange, red and silver anodising.

View the colour variants here

February 12, 2018

Reedy Zappers SG Competition 4S LiHV battery packs

Coming from Team Associated are the new Reedy Zappers SG Competition 4S 15.2V LiHV packs. The silicon graphene construction lowers internal resistance, increases voltage output, reduces operating temperatures, and improves cycle-life and the batteries are available in 4S 5200mAh low profile and 6400mAh high capacity versions. A high-quality, durable hardcase helps prevent damage while embedded socket connectors keep power-robbing resistance to a minimum. Male 5mm ESC connectors and a 4S balance lead are included.

View the high capacity pack here

January 4, 2018

Reedy Zappers SG competition LiHV battery packs

Team Associated have introduced their all-new Reedy Zappers SG LiHV battery packs. Their silicon graphene construction lowers internal resistance, increases voltage output, reduces operating temperatures, and improves cycle-life. Zappers SG batteries are available in low-profile (LP) stick and shorty versions as well as a 1S version designed for 1/12th scale and other classes that require the use of a 1S battery. A 7.6 nominal voltage means that with a suitable charger, the battery can be safely charged to 4.35V/cell. However, even when the typical 4.2V/cell charging limit is enforced, Zappers SG still offers a significant advantage thanks to a flatter discharge curve, which results in more voltage deeper into the race. A high-quality, durable hard case helps prevent damage while embedded socket connectors keep power-robbing resistance to a minimum. A charge lead and male ESC connectors are included.

View the other new battery packs here

December 28, 2017

Reedy Blackbox 850R 1/8th competition ESC

Team Associated have introduced the new Reedy Blackbox 850R brushless speed controller for 1/8th competition applications. Track-tested and competition proven, Reedy’s Blackbox 850R is a versatile and powerful ESC capable of winning at the highest levels of competition. A wide range of precision adjustability, excellent throttle and brake feel, and durable high-quality hardware make the Blackbox 850R perfectly suited for 1:8 buggy and truggy applications. The 850R comes pre-programmed with settings that are suitable for most applications and track conditions. But by utilising the Blackbox PROgrammer2, the full potential of the 850R can be exploited. In addition to working as an ESC programmer, it functions as a battery monitor and USB firmware update device.

View the features and specifications here

December 13, 2017

Reedy S-Plus competition spec class motors

Coming from Reedy are the new S-Plus competition spec class electric brushless motors. The heart of the S-Plus is a thin leg stator that allows shorter wire lengths, resulting in great reduction in resistance. The thin-leg stator also reduces the motor’s weight, as handling and chassis turning flexibility improves. Machined parts such as the can, timing cap, back plate, and sensor assembly have been placed on a diet. An entire section of the front plate has been removed to reduce weight with an added benefit of allowing the user to re-position it to lower CG depending on which type of car it is being installed in. A savings of nearly 30g has been achieved. Additionally, the motor’s length has been reduced by more than 2mm, which aids left/right balance and moves mass towards the centre of the chassis. An all-new high-strength, balanced rotor is more powerful that its predecessor. Because the rotor is interchangeable with those in 540-M3 spec motors, a wide range of tuning options are already available. Precision stainless steel ball bearings have been fitted to accommodate high RPM loads with exceptional efficiency and reliability. Three versions, 21.5, 17.5, and 13.5, are available with more versions to follow.

View the features and another image here

Tonisport
Mibosport
LC Racing
VP Racing
T-Works