Red RC » T-Works

May 29, 2026

T-Works X5B | X3GT Light Weight P1 Wheel Hubs

Releasing more option parts for Hong Nor owners, T-works has released these Light Weight P1 Wheel Hubs that work on both the X5B 1:8 Buggy platform and the Taiwanese manufacturer’s World Championship winning X3GT 1:8 GT platform. Manufactured from 7075-T6 aluminium and finished with black hard anodising, they feature a lightweight design that boosts acceleration, handling and fuel efficiency. The original Hong Nor hex hub features a P1.25 thread while T-Work’s adopts the popular P1 thread for compatibility with most aftermarket hex nuts. Coming as a pack of hubs, T-works also offers the hubs in wider +1mm and +2mm options which are sold as a pair and offer greater stability and grip.

View wider hub set here

May 26, 2026

T-Works X5B | iX5B Alu Centre Diff Blocks

T-works has released new Aluminium Centre Diff blocks for both the nitro and the electric versions of the X5B 1:8 Buggy platform from Hong Nor. Made from 7075 T6 aluminium alloy and featuring a blackened flanged design, the blocks feature high torsion resistance, firmly locks the differential and CVD drive shafts for more precise power transmission.

View more images here

May 20, 2026

T-Works MBX8R Front Hub Weight System

Extending its range of Front Hub Weight Systems, T-works has added a set for the for the Mugen Seiki MBX8R 1:8 Buggy/Truggy platform. Consisting of aluminium mounting plates and anodised precision balancing brass weights in both 5 and 10 gram options, the plate is mounted to each steering hub which in turn becomes a fixing point for the weights. These can be switched between four height options to adjust the front weight distribution to the sensitivity required. T-works advice the use of thread lock when mounting to prevent loosening during operation.

View additional image here

May 18, 2026

T-Works X5B Carbon Shock Towers with Short Standoffs

Continuing to roll out option parts for the Hong Nor X5B 1:8 Buggy, T-Works introduces these front & rear Carbon Fibre Shock Towers with short standoffs. Replacing te aluminium kit included towers, they are produced from 5mm carbon fibre sheet and paired with 2mm shortened aluminium shock standoffs. This helps achieve dual optimisation of lightweight and low centre of gravity, enhancing handling stability.

View more images here

May 1, 2026

T-Works X5B CF Receiver Box Cover & Connector Switch

T-Works has released this Carbon Receiver Box Cover & Connector Switch for the Hong Nor X5B 1:8 Buggy. The cover replaces the kit standard plastic cover and includes wiring for the a Connector Style Power Switch. They also offer a bank carbon fibre cover for those utilising the buggy’s receiver box standard on/off switch mount. As part of the release T-Works has also produced a carbon cover for the battery box.

View more images

April 30, 2026

T-Works MP11 Alu Centre Diff Lower Mounts

In its latest Kyosho MP11 option parts release, T-Works has added these 7075-T6 Aluminium Centre Diff Lower Mounts. With a blackened finish and refined bevel design, it features high torsion resistance and firmly locks the centre differential and CVD drive shafts for improved transmission accuracy. Its structural design conducts heat directly from the centre differential to the chassis base for rapid heat dissipation and effectively lowers the operating temperature of the centre differential. Stainless steel gaskets replace the original plastic versions, distributing screw locking pressure to prevent chassis deformation, ideal for gear replacement and assembly.

Source: T-Works [rc-tworks.com]

April 24, 2026

T-Works RC8 B4.1 Front Hub Weight System

T-works has added this Front Hub Weight System for the Team Associated RC8 B4.1 1:8 Buggy. Consisting of aluminium mounting plates and anodised precision balancing brass weights in both 5 and 10 gram options, the plate is mounted to each steering hub which in turn becomes a fixing point for the weights. These can be switched between four height options to adjust the front weight distribution to the sensitivity required. T-works advice the use of thread lock when mounting to prevent loosening during operation.

View additional image her

April 22, 2026

T-Works 1:8 Buggy PEEK Shock Shaft Guide Sets

New from T-Works comes these new PEEK Shock Shaft Guide sets for 1:8 Buggies from Mugen Seiki, Team Associated, Sworkz and Hong Nor. Made from upgraded PEEK (Polyether ether ketone) material they offer heat-resistant, ultra-wear-resistant, high-strength, and longer service life. They also comprehensively improve performance through creating a smoother more durable high precision suspension. Specific kits are available for the MBX8, RC8, S35.4 EVO, and X5B.

Source: T-Works [rc-tworks.com]