T-Works continue to give the Tamiya TC-01 plenty of attention, today releasing this set of suspension mount adjustment spacers. Also suitable for the M07 chassis, they feature a U-shaped design meaning that you only need to slightly loosen the suspension mount screw to insert or remove the spacer. Sold as a pack of 8 pieces.
Source: T-Works [rc-tworks.com]
T-Works introduce their new 2-way socket driver. Machined from hard coated 7075-T6 aluminium, the tool sports a 5.0mm and 5.5mm socket driver on either end, with the handle featuring a knurled finish for comfort and improved grip. The tips have size etched into them for easy reference and are removable should they need to be replaced.
Source: T-Works [rc-tworks.com]
T-Works continue to release new parts for the Tamiya TC-01 with the new parts focussed on shedding weight where possible. First up is the spur gear adaptor, which has been made from hard coated 7075 T6 aluminium, the new material along with the minimal design, help to bring the weight down from 7.1g to 2.1g. Next up is the new suspension balls, again from the same material, the weight saving is 4 grams (8 pieces) over the standard parts. Finally the 24 piece ball end set, again made from hard coated high quality aluminium, helps in reducing the weight from 27.5g to just 7.3g, which when you combine it with the other two new items gives you a total weight saving of nearly 30grams.
T-Works have introduced this driveshaft bearing spacer set for the Tamiya TC-01. The set consists of 2 blue anodised spacers for the front and rear transmission assembly as well as 4 black spacers for in the front and rear uprights. The spacers go between the two bearings on the wheel axles and the front and rear pilot shaft, replacing the kit version.
Source: T-Works [rc-tworks.com]
T-Works have introduced these set of 4 damper extenders for the Tamiya TC-01 shock absorbers. Made from high quality aluminium and black anodised, they sport the T-Works logo, and are a direct replacement for the kit plastic versions.
Source: T-Works [rc-tworks.com]
New for the Yokomo line of 1/12th scale cars, comes this set of rear wheel hub screws from T-Works. Made from high quality titanium, with a machined head, these lightweight M3x6mm screws come in a set of 6 pieces and are supplied with the corresponding Allen key.
Source: T-Works [rc-tworks.com]
T-Works continue to release their line of 60mm tools with the announcement of this 3mm Phillips screw driver. Like the rest of the tools in this range it features a 60mm long hardened steel tip and a lightweight aluminium tool handle that has the tool size represented on the top by machined rings for quick and easy reference.
Source: T-Works [rc-tworks.com]
T-Works have introduced a new general shock stroke and rebound gauge for 1/8 buggy. The gauge features a red anodised hex head button that attaches to the upper shock cap and it allows the user to measure the shock’s stroke, rebound and also suspension droop for swift setup adjustments. The tool is made from high-quality aluminium and it features white colour markings from 60-150mm for easy reading of the measurements.
Source: T-Works [rc-tworks.com]
