Red RC » T-Works

September 20, 2019

T-Works MP10 steel centre driveshaft set

T-Works are busy adding more Kyosho Inferno MP10 released optionals to their range with the latest being a steel centre dogbone driveshaft set. It included two high-quality steel 85mm and 119mm centre driveshafts as well as heavy duty couplers for the diff input gears. Using dogbone-style driveshafts can help to free up the drivetrain under load which changes the drivetrain’s behaviour, resulting in improved steering up front and greater traction in the rear.

Source: T-Works [rc-tworks.com]

September 19, 2019

T-Works A319 aluminium shock standoffs

Coming from T-Works and made for the Agama A319 1/8th off-road buggy are new lightweight aluminium shock standoffs. Machined from aircraft-grade 7075-T6 material and coming with a hard surface coating for reduced wear, the standoffs are available as a 4-piece pack in standard length and as 2-piece sets in +4mm or +5mm specification with the added length changing the shock angle which can be beneficial when run in the rear of the buggy. Includes in the sets comes suitable mounting hardware.

View the other standoffs here

September 18, 2019

T-Works Kyosho & Mugen black upper shock caps

T-Works have introduced two new aluminium upper shock caps sets, coming for the Kyosho MP10 and MP9 range of cars as well as the Mugen MBX8 and MBX7 kits. Both are machined from high-quality 7075-T6 aluminium and they come with a black colour hard-coated surface for improved durability. The sets include shock bushings as well as two types of volume compensators in soft and hard specification, allowing to adjust the shock action under compression. The Kyosho set is usable with the MP10, MP9 TKI 3 and TKI4 as well as the MP9E and MP9E Evo. The Mugen caps are usable with all MBX8 and MBX7 kits.

View the Mugen shock caps here

September 17, 2019

T-Works MP10/MP9 alloy offset shock standoffs

T-Works have introduced new offset aluminium shock standoffs for the Kyosho MP10 and MP9 series buggies. The parts are machined from aircraft-grade 7075-T6 aluminium, they are hard-anodised for wear and will reduce the overall weight while lowering the centre of gravity. The shock mounts are available in +4mm and +5mm variants with the added length changing the rear shock’s mounting angle which can be beneficial in certain track conditions. The standoffs are usable for the MP10, MP9 TKI3 and TKI4 as well as the MP9e Evo and they come in sets of two including suitable shock mounting screws.

View the +5mm standoffs here

September 5, 2019

T-Works A319 steel chassis plate protectors

T-Works have introduced their new steel chassis plate protectors for the Agama A319 buggy. Machined from high-quality material and coming as 2-piece sets for either the front or the rear of the chassis, the plates prevent the lower main plate from becoming overly scratched or damaged when running on highly abrasive surfaces or tracks with huge jumps. Included with the sets come longer bulkhead mounting screws, making the parts a direct fit.

View the rear chassis plate protectors here

August 23, 2019

T-Works tire additive container

T-Works have released their own empty tire additive container for racers that like to mix their own special sauce or don’t want their competitors to know which sauce they are using. The container setup is fairly standard, a 50ml metal container which has an application sponge attached to the lid. It comes with a range of coloured dot decals to allow you to keep track of its contents.

Source: T-Works [rc-tworks.com]

August 8, 2019

T-Works electric on/off switch

T-Works have introduced their new electronic on/off switch for nitro vehicles. It replaces the standard mechanical switches for a multifunctional unit that not only is a lot more reliable but it also offers a battery monitor function for LiPi and NiMH receiver battery packs. The switch is usable with 5V to 9V input and up to 8A of current and it installs in the same location as a mechanical switch. Included with the splash-waterproof device is a dust cover ad well as a counter plate and mounting hardware and it comes pre-wired with universal-type connectors.

View another image here

August 5, 2019

T-Works MP10 aluminium wing stay mount

T-Works have announced the release of a new aluminium wing stay mount for the Kyosho Inferno MP10 buggy. Machined from high-quality 7075-T6 aluminium and coming black anodised for wear and looks, the wing stay mount replaces the original part for a more sturdy construction that can improve overall downforce. Includes with the mount comes gold-coloured mounting hardware.

View another image here