Red RC » T-Works

July 1, 2019

T-Works 16mm shock diaphragm sets

T-Works have introduced two new shock diaphragm sets for 16mm big bore shock absorbers. Available in a softer hollow and a harder honeycomb design variant, the diaphragms fit many of today’s 16mm 1/8th scale shock absorbers and they help to adjust rebound to the driver’s liking. The hollow “A” variants will make for smoother rebound characteristics as the honeycomb “B” volume compensators will make for a harder rebound, the latter being a good choice especially for smoother track conditions. The A and B variants are available as separate 4-piece sets.

View the Type B diaphragms here

June 25, 2019

T-Works 34mm universal 4-shoe clutch set

Coming from T-Works is a universal 34mm 4-shoe clutch set for 1/8th buggy, truggy and GT kits. It contains a machined aluminium 34mm diameter flywheel, alloy clutch shoes as well as 4-piece sets of 0.9mm and 1.0mm clutch springs to fine-tune the clutch’s behaviour. Also included are the clutch nut, drive cone and clutch screws. All parts are also available separately for spares or repair.

Source: T-Works [rc-tworks.com]

June 24, 2019

T-Works MP10/9 brass C-hub inserts

T-Works have released a brass C-hub insert set for the Kyosho MP10 and MP9 buggies. The included inserts allow to access the hub’s 0 t0 3 settings while offering a higher weight and increased strength. The added weight is beneficial especially in bumpy conditions or when seeking traction on lower grip surfaces. Laser-etched markings allow for easy identification and the parts are usable for the new MP10 as well as the older specification MP9 TKI4/TKI3 and MP9E and MP9E Evo kits. In addition to the complete set T-Works also offers 2-piece sets of the individual inserts.

View the individual inserts here

June 21, 2019

T-Works MP10 1-piece engine mount plate

Coming from T-Works and made for the Kyosho Inferno MP10 buggy is a 1-piece engine mount plate. Machined from high-quality 7075-T6 aluminium and coming black anodised and with machined silver edge details the plate will look the part while also offering improved stability and easier gear mesh setup.

Source: T-Works [rc-tworks.com]

June 19, 2019

T-Works MP10/MP9 aeration shock caps

Coming from T-Works and made for the Kyosho Inferno MP10 and MP9 series of kits is an aeration shock cap set. The kit allows to utilise “bleeder”-type shock caps over the standard diaphragm design for added shock adjustability when conditions call for it. The caps are machined from high-quality 7075-T6 aluminium, they come hard anodised for wear and looks and the set also includes all needed mounting hardware. The shock caps are usable with the MP10 as well as the MP9 TKI4, TKI3 and MP9E and MP9E Evo kits.

Source: T-Works [rc-tworks.com]

June 14, 2019

T-Works SDX-4 Evo carbon fibre shock towers

T-Works have released new front and rear carbon fibre shock towers for the Serpent SDX-4 Evo 1/10th scale 4WD buggy kit. Both are of an updated design with fewer upper shock mounting positions for the front tower while the rear shock stay offers an increased amount of upper shock mounting positions. Also the upper camber link positions have been updated to widen the buggy’s setup window. The shock towers are made of high-quality carbon fibre and they are available separately.

View the rear shock tower here

June 13, 2019

T-Works RC8B3.1 aluminium shock caps

Coming from T-Works and made for Team Associated RC8B3.1 series kits are two new aluminium shock cap sets. Available as volume compensating diaphragm and bleeder cap aeration set, the shock caps allow to adjust the shock performance to match specific needs when it comes to track conditions or driving styles. The diaphragm set includes a total of eight rubber volume compensators in hollow and honeycomb design while the aeration shock cap kit includes seals and gold-colour bleeder screws. Also included in both sets are shock mount bushings for improved durability.

View the bleeder caps here

June 13, 2019

T-Works roll out B74 optionals

Coming from T-Works and made for the new Team Associated B74 buggy are a couple of option parts such as titanium ball ends, turnbuckles and screw sets. First up is a 14-piece ball end set that is machined from high-quality 64 grade titanium. The parts replace the standard ball ends for items of lower weight and greater corrosion resistance. Also new is a 7-piece set of titanium turnbuckles. Like the ball ends the parts will lower the overall weight while offering cool looks and greater corrosion resistance. Last but not least come two screw kits – a 119-piece UFO head titanium set and a 144-piece gold-colour steel fastener kit. The titanium set will again make for a weight reduction while the golden screws mainly add bling.

View the other new parts here