Red RC » T-Works

July 18, 2019

T-Works MP10 aluminium rear hub set

Available now from T-Works is an aluminium rear hub set for the Kyosho Inferno MP10 buggy. The set includes machined 7075-T6 aluminium rear hubs as well as delrin ball bearing inserts, machined aluminium wheelbase spacers as well as brass A and B bushings that help to add unsprung masses if needed. The latter comes in handy especially on lower grip surfaces were adding weight to the suspension can lead to increased traction. The alloy parts come black anodised for wear and looks and the set is rounded out by gold-colour hardware.

Source: T-Works [rc-tworks.com]

July 15, 2019

T-Works Kyosho 1/8th scale pipe mount set

T-Works have introduced an exhaust pipe set for Kyosho’s MP10 and MP9 off-road as well as GT3 and GT2 on-road kits. The set includes a machined aluminium pipe spring mount as well as gold colour mounting hardware and a heavy duty exhaust mount spring and it helps to create a stylish yet secure and reliable fixing point for standard and optional exhaust pipes.

Source: T-Works [rc-tworks.com]

July 12, 2019

T-Works introduce A319 optionals

T-Works have announced first option parts for the new Agama A319 1/8th scale nitro buggy. The range includes a lightweight 7-piece titanium turnbuckle set, a 150-piece UFO head titanium screw kit as well as 173-piece gold-colour steel screw set. The titanium parts are cut from high-quality 64-grade titanium for a low weight and high strength, ensuring a lower overall car weight and greater corrosion resistance. The gold-coloured steel screws however mainly add visual impact, allowing the ride to stand out.

View samples of the screw kits here

July 11, 2019

T-Works MP10 94mm steel CVD driveshaft set

T-Works have announced the release of a 94mm steel CVD set for the Kyosho MP10 buggy. The high-quality driveshafts increase traction over the conventional universal shaft design and the set includes aluminium cup rings to stop the cross pins from moving, greatly improving overall reliability. The set includes two driveshafts that are usable for the front and the rear of the buggy. Optionally available are front and rear aluminium axle shafts specially designed for the use with the above CVD set. Using the parts will reduce unsprung masses which can be beneficial in certain track conditions. The axle shafts are machined from high-quality aluminium and they come hard anodised for wear.

View the alloy axle shafts here

July 4, 2019

T-Works low CG balancing weights

Coming from T-Works are new low centre of gravity balancing weights in 5g and 10g variants. Machined from heavy brass material and coming with a black surface coating for looks and corrosion resistance, the weights also feature gold-colour writings for easy identification. The screw-on weights are usable for most 1/10th and 1/8th scale vehicles, helping to up overall weight or fine-tune weight balance, and they are available separately.

View the 10g weight here

July 2, 2019

T-Works NB4 screen protector

Coming for the FlySky NB4 radio is a new screen protector from T-Works. The crystal clear protector sheet will prevent the screen from becoming scratched or damaged while allowing for easier cleaning at the same time. The pre-cut protector is a direct fit and it is available from now on.

Source: T-Works [rc-tworks.com]

July 1, 2019

T-Works 16mm shock diaphragm sets

T-Works have introduced two new shock diaphragm sets for 16mm big bore shock absorbers. Available in a softer hollow and a harder honeycomb design variant, the diaphragms fit many of today’s 16mm 1/8th scale shock absorbers and they help to adjust rebound to the driver’s liking. The hollow “A” variants will make for smoother rebound characteristics as the honeycomb “B” volume compensators will make for a harder rebound, the latter being a good choice especially for smoother track conditions. The A and B variants are available as separate 4-piece sets.

View the Type B diaphragms here

June 25, 2019

T-Works 34mm universal 4-shoe clutch set

Coming from T-Works is a universal 34mm 4-shoe clutch set for 1/8th buggy, truggy and GT kits. It contains a machined aluminium 34mm diameter flywheel, alloy clutch shoes as well as 4-piece sets of 0.9mm and 1.0mm clutch springs to fine-tune the clutch’s behaviour. Also included are the clutch nut, drive cone and clutch screws. All parts are also available separately for spares or repair.

Source: T-Works [rc-tworks.com]