T-Works have introduced new carbon fire option parts for the Kyosho Inferno MP10 buggy in the form of a radio plate and an upper plate. Both are cut from high-quality carbon fibre and they replace the standard alloy items. While adding a factory touch the parts also offer slightly different flex characteristics compared to the standard alloy items, allowing to adjust overall chassis flex.
T-Works have released first option parts for Kyosho’s all-new MP10 1/8th off-road buggy. The range includes a 26-piece hard-coated aluminium pivot ball set, a titanium turnbuckle set as well as two screw kits, a 149-piece titanium UFO head set as well as a 160-piece gold-plated steel screw set. The pivot ball will greatly reduce the overall weight and unsprung mass of the suspension while the titanium items will scrub weight and add corrosion resistance. The gold-plated screw set will do nothing in terms of weight but add a lot of visual impact. Last but not least is a 10-piece set of stainless steel 0.1mm and 0.5mm thin 4.5x10mm shims that can be used to reduce axial play in various places.
Coming from T-Works and made for the Xray T4 2017 to 2019 kits is a highly adjustable battery holder kit. The set includes L-shaped carbon fibre battery locators, lightweight aluminium or heavy brass mounts as well as two types of battery hold down stand offs for low-profile 18mm or standard 25mm tall batteries. The actual height of the hold downs is adjustable and the battery holder set allows to shift the battery pack left to right and forth/back a couple of millimetres in order to fine-tune the chassis weight bias.
Specially made for 8mm body posts are T-Works’ new aluminium body height adjusters. Machined from quality aluminium and coming black anodised, the parts help to easily fine-tune the body height simply rotating them and choose one of the many pairs of holes that allow to shift the body up and down by a couple of millimetres. The 4-piece set is usable with virtually all 8mm long-style body posts and it is available now.
Source: T-Works [rc-tworks.com]
T-Works have introduced several titanium option parts for the popular PR Racing SB401 Type-R 1/10th scale 4WD off-road buggy. Available are a 105-pice set of UFO head screws, a titanium ball end set as well as a titanium turnbuckle kit. All parts are machined from high-quality 64 grade titanium that will help to reduce overall weight while being highly corrosion resistant. The turnbuckle set also includes a suitable wrench, making building and setup changes a breeze.
Coming from T-Works and made for the Team Associated RC8B3.1 and B3.0 buggies is a hard-coated aluminium servo saver shaft set. Precision-machined from aircraft-grade 7075-T6 aluminium the shafts are a direct replacement for the standard steel items, scrubbing weight without sacrificing strength. The hard-coated surface ensures long wear and the shafts are usable with the RC8B3.1 and B3.0-based buggies and trucks.
Source: T-Works [rc-tworks.com]
Coming from T-Works is their new bearing cleaner. The tool allows to easily and conveniently clean new or used bearings by simply placing them in the container’s metal insert, drop the insert into the container and add a good amount of cleaning agent, such as motor or brake cleaner. After closing the container, thorough shaking will loosen and remove grease, dust, dirt and grime, leaving noting but perfectly cleaned bearings that are ready for a new coat of oil or grease.
Coming from T-Works and made for the Team Associated RC8B3.1 is a connector-style switch set. The kit replaces the standard composite receiver battery box lid with a carbon fibre plate and integrated connectors, that allow to switch the receiver on and off using a jumper wire. The assembly ensure improved relniabliliy and security compared to the standard switch while also adding visual impact. The switch plate comes pre-soldered with JR-style universal connectors for the receiver and battery wire and it is a direct fit for all kits using the RC8B3.1 battery box.
