Red RC » T-Works

May 9, 2018

T-Works B6 series DLC-coated suspension pins

Made for Team Associated’s B6 and B6.1 series of vehicles are new DLC-coated suspension pins from T-Works. Available as complete 8-piece car set and also as separate 3×25.9mm, 3×33.9mm or 3.5×47.4mm pairs, the pins are machined from high-quality steel and they are coated using the same Diamond Like Carbon coating many high-end nitro engines utilise for protecting the crankshaft. The silk surface will ensure smooth suspension arm movement, a very low wear and high corrosion resistance. The pins fit the B6, B6D, B6.1 and B6.1D and they are available from now on.

View more images here

May 7, 2018

T-Works roll-up pit mats

New from T-Works come two roll-up pit mats with different designs. Both measure 120x60cm and they sport either a black and white or graffito style print. The mats are made of high-quality material, they help to keep pit tables clean and they include a handy carry strap for easy transportation and storage.

View the Graffito style pit mat & carry strap here

April 24, 2018

T-Works MBX8 CF shock towers & arm stiffeners

Coming from T-Works and made for the Mugen MBX8 buggy are new carbon fibre front and rear shock towers as well as carbon fibre A-arm stiffeners. Starting with the shock towers, the parts are machined from high-quality 4mm carbon fibre and are understood to utilise the standard kit geometry. The towers are light of weight and due to their different flex characteristics compared to the standard items, they can improve handling on slippery surfaces. The shock stays are available separately or as a complete set including the front and rear tower. Also new are carbon fibre A-arm inserts for the MBX8. The inserts will reduce the natural flex of the arms which can be beneficial in a range of track and temperature conditions. The inserts are machined from high-quality carbon fibre and are available as a complete set or separately for the front or rear.

View the other new parts here

April 23, 2018

T-Works MP9 TKI3/4 aluminium & brass A-arm mounts

Coming from T-Works and made for the Kyosho MP9 TKI3 and TKI4 buggies are aluminium or brass lower suspension mounts. The items come as FF, FR, RF high or RF low mounts and are machined from either lightweight aluminium or heavy brass all of which help to fine-tune the weight distribution of the buggy. A black surface coating reduces wear and silver (alloy) or gold-colour (brass) machined edges add a certain bling to the parts.

Source: T-Works [rc-tworks.com]

April 20, 2018

T-Works MBX-series aluminium wheel hubs

T-Works have introduced a range of lightweight aluminium wheel nuts for the Mugen MBX series of buggies and GT cars. The wheel hex adapters are machined from high-quality 7075-T6 aluminium and they come hard-coated for wear. Excessive machining greatly reduces the overall weight for lower rotational masses while adding a bit of visual impact at the same time. The wheel hubs are available as a 4-piece 0mm offset set and also as 2-piece +1mm or +2mm sets that help to increase the track width when conditions call for it. All three types are usable with kits such as the MBX8, MBX7/R, MGT7 and MBX6.

View the +1mm and +2mm sets here

April 19, 2018

T-Works MP9 TKI4/3 shock & suspension mounts

Coming from T-Works and made for the Kyosho MP9 TKI4 and TKI3 are front and rear alloy shock towers as well as a front upper suspension mount. The front shock tower is available in a S/High Mount configuration while the rear shock stay is of a standard geometry. The front upper suspension mount is supplied in High Mount configuration to match the front shock tower. All parts are machined from high-grade 7075-T6 aluminium, they come hard-coated for wear and looks, laser-etched for easy identification and they are available separately.

View the other new parts here

April 18, 2018

T-Works MBX8 aluminium shock standoffs

T-Works have introduced a range of aluminium shock standoffs for the Mugen MBX8 and MBX7 kits. Available as 4-piece standard length as well as 2-piece +4mm and +5mm sets, the standoffs are machined from high-quality 7075-T6 aluminium and they come hard anodised for wear and looks. Includes with the shock mounts also come suitable screws.

View the +4mm and +5mm standoffs here

April 17, 2018

T-Works manifold supports

T-Works have introduced their new manifold support for a range of 1/8th off-road vehicles. The Type A support is 10.5mm tall and usable with kits such as the Kyosho MP9 TKI2 to TKI4, JQ Racing’s THE Car Black Edition, the HongNor X3 GT/X3 and Evo/X3 as well as the HB Racing D817T, D817 Ver.2, D817 and D815. The Type B 7mm support is usable with the Mugen MBX8 buggy exclusively. Using the manifold support ensures the exhaust system will move less when going over rough parts of the track or when bottoming out after landing a jump, which results in a lot less stress on all exhaust and engine components and thus improve longevity. The supports include suitable mounting hardware.

View more images here