T-Works have introduced a short 5.5mm nut driver. The tool is machined from aluminium, it comes black anodised for wear and looks and it is especially useful on 1/10th 2WD buggies where reaching the front suspension’s shock mount nuts can be a tough task. Due to the large diameter even strongly tightened nuts can be undone easily.
Coming from T-Works is a series of oils and lubricants for a multitude of applications. The range includes a high RPM bearing oil, a high viscosity bearing oil, the Nano Ceramic lubricant as well as the Joint and Cup lube. All come in handy bottles with needle applicators for easy and convenient use of the products.
View the other new products here
Coming from T-Works and made for the Serpent SDX4 1/10th 4WD buggy are two rear stiffener bushing sets. Available as lightweight 5-piece aluminium and heavy 3.5g 2-piece brass sets, the bushings replace the standard parts for cooler looking or heavier items, helping to add visual impact and weight when needed.
T-Works have introduced a ball end set for the Xray T4’17 touring car kit. Coming with a friction-reducing titanium-nitride coating the ball ends not only improve overall suspension performance but the gold-colour finish also adds visual impact. The 18-piece set includes four different ball end sizes and it is a direct replacement for the kit’s ball ends.
Source: T-Works [rc-tworks.com]
Coming from T-Works and made for their Yokomo BD8 aluminium motor mount and floating servo mount set are two centre stiffener weights. Machined from brass and coming in a 20g or a 30g variant, the weights attach directly to the motor and servo mounts, they act as an inner battery stop, increase the overall chassis rigidity and add valuable weight at the most central part of the chassis. The weights are cut from high-quality brass material, they come with a black coating for wear and looks and they are marked for easy identification.
T-Works have introduced new spring pre-load nuts for Team Associated’s 6th generation off-road vehicles such as the B6 and B64. Machined from high-quality aluminium and sporting a heavy knurling, the nuts allow for convenient spring pre-load adjustment while white markings make for easy setting recognition. Each nut is also clearly marked, meaning left and right hand shocks get not mixed up. The pre-load nuts come in sets of four and in blue or black anodising.
T-Works have introduced a set of spring preload nuts for the Xray T4 series of cars. The parts are machined from 7075-T6 aluminium, they come orange anodised to match the remainder of the car and are marked for easy identification of the shock absorbers and preload setting. Included in the 4-piece set are also new setting retaining O-rings. T4 specific due to their colour the nuts are also usable on the Yokomo BD8 and BD7.
T-Works have introduced a set of aluminium side guard screws for the HB Racing D817 off-road buggy. Made from aircraft-grade 7075-T6 aluminium and coming with a silver finish, the screws save some weight on the outer parts of the chassis while also adding visual impact. The fasteners are direct replacements for the stock parts and they come in sets of ten.
