Red RC » T-Works

September 13, 2016

T-Works TC7.1 titanium, alloy & gold-plated screw kits

A range of different screw kits for the recently announced and ROAR Paved Nationals winning Team Associated TC7.1 is coming from T-Works. Available is a full 64 titanium screw set, a 7075-T6 dark blue anodised aluminium set, a mixed 64 titanium and blue 7075 alloy set as well as a gold-colour steel screw set. All fasteners are made of high-quality material and included come most of the needed fasteners. Please note that the images show samples of T-Works’s screw kits but not the TC7.1-specific sets.

View the other screw sets here

September 7, 2016

T-Works MRX-6 64 titanium shafts

Coming from T-Works and made for the Mugen MRX-6 are a range of hinge pins for areas such as the suspension, body mounts and transmission. The 13-piece set includes front upper and lower arm shafts, rear lower arms shafts, rear body bar pins, as well as a 3x20mm solid axle pin and four 3x24mm axle pins. All parts are made from high-quality titanium for a light weight and exceptional durability and beside the full set T-Works also offers the parts separately with the suspension and body bar pins coming in 2-piece sets, the solid axle pin is a single item and the axle pins come in sets of four.

Source: T-Works [rc-tworks.com]

September 5, 2016

T-Works RC8B3 spring steel shock standoffs

Coming from T-Works and made for Team Associated’s RC8B3 buggies are spring steel shock standoffs. Machined from high-quality material and coming with a special surface treatment for wear the 1-piece parts offer high durability and their design allows for easy shock angle adjustments by holding the standoffs with a suitable wrench and undoing the rear fastening nuts. Included in the set are four shock standoffs and eight flanged nuts.

Source: T-Works [rc-tworks.com]

September 2, 2016

T-Works B6-series hard-coated alloy pivot balls

Coming from T-Works are 7075-T6 aluminium pivot balls for Team Associated’s sixth generation buggies. Machined from aircraft-grade aluminium and coming hard-anodised for wear the 6mm pivot balls scrub a good amount of weight compared to their steel counter parts and they are usable on the lower shock ball cups and also the chassis’ waterfall-to-gearbox connection. The set includes five pivot balls, enough to equip all four shocks and the chassis brace.

View more images here

August 25, 2016

T-Works 8ight shock stroke & rebound gauge

T-Works have introduced their new shock stroke and rebound gauge specially made for TLR’s 8ight range of buggies. The gauge features a 1/4″ hex head button that attaches to the upper shock cap and it allows to measure the shock’s stroke, rebound and also suspension droop for swift setup adjustments. The tool is made from high-quality aluminium and it comes with white colour markings for easy reading of the measurements.

Source: T-Works [rc-tworks.com]

August 22, 2016

T-Works B6-series chassis balance weights

Made for Team Associated’s sixth generation 1/10th 2WD buggies come two aluminium chassis weights. Machined from high-quality alloy and sporting a back anodised surface and laser-etched markings the under servo weight weighs in at 9.5g while the under electronics weighs adds 15g to the all-up weight of the buggy. Both use existing hardware holes and are thus securely fastened even when the going gets tough. The weights are usable separately or in combination and they fit both the B6’s and B6D’s chassis pockets.

View more images here

August 20, 2016

T-Works UFO 64 titanium socket head screws

T-Works have introduced their new series of UFO 6AL/4V grade 5 titanium screws. CNC machined the M3 fasteners sport a distinctive “flying saucer”-shaped 2mm hex head, making them not only look different compared to other screws but they also provide exceptional mounting surface. The screws will be available in 14 different length from 4mm up to 24mm wit a special 35mm long variant also being available.

View a detail image of the screw head here

August 18, 2016

T-Works BD7-2016 progressive damping system ver.2

T-Works have introduced the refined version two of their progressive damping system for the Yokomo BD7-2016. Offering larger diameter pistons and a greatly reduced wall thickness of the alloy inserts the set, in combination with 400 to 600 oil, will make for even better performance especially on technical tracks with high corner speeds. The set includes four alloy inserts and four plain pistons and it is available now.

View a comparison image between ver.1 and ver.2 here