Red RC » T-Works

August 17, 2016

T-Works B6-series titanium battery post with locknuts

Coming from T-Works and made for Team Associated’s sixth generation 1/10th off-road buggies are titanium battery mount posts. The parts offer a plain middle section for improved battery brace fitment and they are also 2.5mm longer than the standard parts, allowing for easy mounting of the battery hold down. The precisely machined hex section makes for effortless height adjustments and the parts come in sets of two, usable on both the B6 and B6D.

View more images here

August 6, 2016

T-Works B6 series C-hub bushings & POM shock parts

T-Works have introduced a range of option parts for Team Associated’s all-new B6-series buggies. First up are several C-hub bushings to fine-tune the steering knuckle height within the C-hub. Available are three different sets; the first one offers two 0 and +3 settings, the second one includes two +1 and +2 bushings and the third includes four +1.5 bushings. Also available is a full set that comes with all of the above. The bushings are machined from high-quality 7075-T6 aluminium, the even types sport a black anodising while the 1.5 parts come with a blue surface treatment. All bushings have machined markings for easy recognition. Also new and made for both the B6 and B5 series buggies are a POM shock shaft guide and a shock cap bushing set. The shock shaft guide set includes a range of machined bushings to replace the standard ones while the shock cap bushing kit includes a total of eight pivot balls.

View the other new parts here

August 5, 2016

T-Works T4 & BD7 titanium suspension pin sets

Coming from T-Works are new titanium suspension pin sets for the Xray T4 and Yokomo BD7 range of cars. The 8-piece sets contain both the inner and outer suspension shafts with the lightweight high-quality material used reducing overall weight while keeping exceptional rigidity in the event of a crash. The T4 set is usable on the ’15 and ’16 kits and the same applies to the BD7-related kit that also is usable for the respective ’15 and ’16 variants.

View the BD7 set here

August 3, 2016

T-Works Optima gold-plated steel screw set

Coming from T-Works and made for Kyosho’s Optima re-release buggy is a gold-plated steel screw set. It includes a total of 90 countersunk, button head and cap head fasteners to add some bling to Kyosho’s iconic 1/10th 4WD buggy without compromising strength.

Source: T-Works [rc-tworks.com]

July 22, 2016

T-Works Mi6 teflon shock shaft guides

Coming from T-Works and made for the Schumacher Mi6 touring car is a set of teflon shock shaft guides. The 24-piece set is made from white high-quality material that greatly decreases friction, resulting in improved shock smoothness and performance. The set includes inner and outer guides and it is available now.

Source: T-Works [rc-tworks.com]

July 8, 2016

T-Works introduce XB8’16 hardware sets

T-Works introduce XB8'16 hardware sets

Coming from T-Works and made for Xray’s XB8’16 1/8th off-road buggy are several new hardware sets. First up is a 64 titanium turnbuckle set including a total of six links and two suitable wrenches. The high-quality titanium turnbuckles replace the standard spring steel ones for lighter parts that also add some visual impact. Also new are two screw sets, one made of 64 titanium to scrub overall weight while the gold-plated steel screw set adds some bling to the buggy. Last but not least comes a 22-piece 7075-T6 hard-coated aluminium ball set. Included are various pivot balls to replace the standard steel parts for lighter items that scrub a good amount of weight.

View the other new parts here

July 6, 2016

T-Works RX8’16 titanium & steel hardware sets

T-Works RX8'16 titanium & steel hardware sets

New from T-Works come several hardware sets for the Xray RX8’16 1/8th on-road car. First up is the 64 titanium turnbuckle and anti-roll bar ball end set. Included are two steering and two rear camber link turnbuckles as well as four anti-roll bar ball ends, all made from high-quality titanium and designed to replace the standard steel parts. The set makes for an overall lower weight and added “bling”. Included is also a suitable 4mm turnbuckle wrench. Also new and made for the RX8’16 is a 140-piece 64 titanium screws set and a 100-piece gold-plated steel M3 screw kit. The titanium kit will significantly lower the overall weight while the gold-plated screw add visual impact while retaining weight.

View the other new sets here

July 4, 2016

Alexander Hagberg joins T-Works

T-Works have announced the signing of Sweden’s Alexander Hagberg. The Xray factory driver will use T-Works’ tools and accessories to build and equip his rides and he has the following to say about the deal:

I am very happy to join the T-Works team. This brand offers me an arsenal of useful and innovative tools as well as accessories, which helps me bring my racing program to next level!

Source: T-Works [rc-tworks.com]