Red RC » Team Associated

December 23, 2015

JConcepts B5M battery hold down thumb wheel

Designed to securely holding down the battery brace on Team Associated’s fifth generation mid motor off-road vehicles are the aluminium battery hold down thumb wheels from JConcepts. They offer an alignment friendly cone shape that eases the wheel into position, it has a larger flange which perfectly matches the proportions of the battery brace and the low-profile shape fits nicely under the latest bodies on the market. On top of this the grippy surface allows hand-tightening with ease. The aluminium wheels are available as pairs, in black or blue colour and they are finished off with a closed-end design which features an etched JC logo.

View more images here

December 22, 2015

Team Associated Factory Team 1:8 wheel nut wrench

Coming soon from Team Associated is the Factory Team 17mm wheel nut wrench. The T-handle wrench is made from hard-anodised, lightweight aluminium and it sports a laser-etched size marking and logo for easy identification. With its sturdy yet ergonomic design it allows to easily install or remove the 17mm wheel nuts of 1/8th buggies, truggies and GT cars.

Source: Team Associated [teamassociated.com]

December 22, 2015

JConcepts lightweight B5M bodyshells

JConcepts have introduced a range of lightweight bodyshells for the Team Associated B5M buggy. The lightweight versions of the S2, S2 for laydown transmissions and the Warrior are around 12g to 15g lighter than their standard counterparts, making them ideal for 17.5T stock racing. They include standard weight wings for durability while for identification purposes, the LW bodies feature a green protective film.

View more images here

December 18, 2015

X Factory SC5M Infinity chassis kit

Coming from X Factory and made for the Team Associated SC5M short course truck is the Infinity chassis kit. The set is made up of 2.5mm carbon fibre and saves about 70 grams to make for better handling and improved performance especially in 17.5 Stock classes. The carbon fibre chassis also flexes far more than the aluminium tub, with the flex is controllable so drivers can quickly adjust their truck to suit different tracks and lay-outs by tightening or loosening bolts on the side decks and side rails. The chassis will also not tweak as aluminium does, making for more predictable performance run after run. The kit includes the new lower deck, sandwich side rail, several small parts as well as mounting hardware and a manual.

View an image of the converted truck here

December 18, 2015

Team Associated Factory Team 48 pitch pinion gears

Team Associated have introduced a line of lightweight Factory Team 48 pitch pinion gears. Machined from 7075-T6 aluminium and coming with a hard-anodised finish for long wear the pinions feature two set screw holes, laser-etched tooth count and the larger sizes of 30 and up have holes for additional weight reduction. The pinions are available in a range of 17T to 35T sizes.

View more images here

December 16, 2015

Team Associated RC8B3 lightweight pillow balls

Team Associated have released lightweight pillow balls for the RC8B3 and RC8B3e buggies. The parts are a direct replacement for the standard steel versions and they reduce unsprung mass in the front steering block assembly, resulting in a more aggressive steering feel which is perfect for smooth track conditions with high grip levels.

View another image here

December 16, 2015

Radtec -4mm 1/12 pan car diff hub set

Radtech have introduced a -4mm differential hub set for 1/12th scale pan cars. Machined from high-quality aluminium and coming in blue or black colour the set includes a left and a right wheel hub who allow the use of wide offset wheels as the hubs reduce the track width by a total of 4mm. The set fits Team Associated’s 1/12th cars as well as all cars with a similar rear axle design.

View the black colour variant here

December 12, 2015

Team Associated RC8B3 FT CVA driveshafts

New from Team Associated come Factory Team CVA driveshafts for the RC8B3 and RC8B3e. They can be used as a tuning option to the universals that come standard in the kits as the CVA assemblies will provide a more aggressive steering feeling, perfect for use on smoother track surfaces. They include steel axles from standard but the an optional aluminium axle can be used for further adjustment to minimise both rotating and unsprung mass, giving an even more aggressive steering feeling and quicker acceleration; ideal for smooth tracks with high-grip levels. All components in the CVA sets are available as individual parts and can be rebuilt as wear occurs using the rebuild kit.

View more images here