Red RC » Team Associated

April 17, 2015

Pro-Line Pro-Spec buggy shocks

Pro-Line have introduced 1/10th buggy versions of their Pro-Spec high-performance shock absorbers. Previously only available for 1/10th short course trucks the shock Pro-Spec dampers now also come for today’s most popular buggies. They are of a 12mm Big Bore design with a single low friction X-ring seal while the pistons and shaft guides are made from smooth white Delrin for low stiction. The threaded aluminium bodies house 3.5mm thick shock shafts with hard chrome coating, just like full scale racing shocks. The shocks also feature an easy access bleeder cap screw for consistent shock builds every time and each pair includes three different piston options of 1.4, 1.6 and 1.8 sizes as well as a blank piston for drilling to a custom size. Custom shock tightening tools and optional shock limiters are also included. The dampers accept most 12mm big bore buggy springs and included are also several upper and lower shock pivot balls as well as optional +2, +4 and +6mm spring perches to fit a wider range of vehicles right out of the box. Coming as separate front and rear sets the shocks are known to fit the Team Associated B5, B5M and B44.3, the Kyosho RB6 and ZX-6, the TLR 22 2.0 and 22-4 as well as the Yokomo B-Max2 and B-Max4.

Click here to view more photos

April 14, 2015

Team Associated RC8B3 Team Kit 1/8th nitro buggy

Following a first teaser Team Associated have released the full details in their all-new RC8B3 1/8th scale nitro off-road buggy. Completely designed from the ground up the buggy builds on a hard-anodised 7075-T6 aluminium chassis designed for optimum weight distribution, ground clearance, and better overall handling. As a result, the buggy is meant to change directions faster, and to be more compliant and stable in rough terrain. The RC8B3 has also received an updated suspension that features a pillow-ball front upright for maximum steering and durability. Refined 16mm Big Bore hard-anodised aluminium threaded shocks and 3.5mm alloy shock shafts provide plush suspension travel. The RC8B3 features precision universal drive shafts front and rear to keep suspension travel free through the entire stroke. The kit comes including a Pro-Line RC8B3 clear body and Team Associated moulded wing.

Click here to view the features and more photos

April 14, 2015

Team Associated RC8B3 Team Kit – Teaser

Team Associated have released a first teaser for their long awaited new 1/8th nitro off-road buggy. Called the RC8B3 the buggy will be the first major revamp of the original RC8 design that was long run as the RC8.2. No details or other images are available yet but you can expect the full features and specifications of the vehicle that won this year’s NeoX race, to surface very soon.

Source: Team Associated [teamassociated.com]

April 10, 2015

Yannick Aigoin departs Team Associated

Team Associated have announced the split with French frontrunner Yannick Aigoin. In his tenure at Team Associated, Yannick competed in two World Championships where he was the highest finishing French driver, along with competing in many International A-main events. Team Associated would like to thank Yannick for his three years of dedication and wish him all the best going forward.

Source: Team Associated [teamassociated.com]

April 9, 2015

JConcepts B5 aluminium wing shim

New from JConcepts come wing shims for the Team Associated B5 and B5M. The buggy offers the option of adjusting the wing angle by changing the direction of the shim or the height by running the shim below or above the wing. JConcepts is now offering the wing shim as a machined aluminium component, available anodized in blue or black colours. The edges are finished with a small highlight chamfer where possible to provide that all important glamorous look. The shim is light-weight and has built in screw bosses on each side which allows the driver to completely secure the shim to the wing with 3mm screws (not included) front and back. The shim has a built in rake of 3 degrees in one direction and shaped to fit around the stock plastic wing mounts or part of the JConcepts screw-down aluminium wing mount system. Utilizing the shim in one direction gives the wing zero degrees or in the opposite direction gives 6 degrees of angle. Placing the shim on top will angle the wing at 3 degrees. Simply drop the new shim onto the wing mounts for a more rigid assembly and secure if preferred with 3mm screws.

Click here to view more photos

April 3, 2015

X Factory Infinity B5M side stiffeners

Coming from X Factory’s Infinity option parts line and made for the Infinity Team Associated B5M chassis is a set of chassis side stiffeners. X Factory’s Infinity B5M chassis has been very successful over the past six months, most notably taking all four rounds of qualifying in Stock Buggy at the Cactus Classic. With all screws in the side rails and side decks tightened securely the CF chassis is quite stiff, but some drivers desire an even stiffer platform on certain high-bite tracks. These side stiffener plastic parts answer the calls. Super-easy to install, the driver just removes the bolts holding the side decks on, drops the new stiffener in, and re-tighten the side deck bolts. Therefore, chassis stiffness can be adjusted in just a minute.

Click here to view the part installed

April 2, 2015

Schelle B44.3 -3mm aluminium chassis set

Available for pre-order now is Schelle Racing Innovation’s -3mm aluminium chassis set for the Team Associated B44.3 buggy. Debuted at the 2015 Reedy Race of Champions the 2.5mm 7075 aluminium CNC milled chassis plate is 3mm shorter and coupled with a new front top deck the new length transforms the 44.3. The reduced length has two main effects; the first is that the car is much more fluid and easy to drive in the turns and the combined shorter wheelbase and increased rear weight bias stop the rear and front from fighting each other in the turns, and the car will follow a smooth arc without breaking loose. Secondly, the short wheelbase and increased weight bias aid in more traction on power and exiting corners. After getting through the turn, it’s easier to pick your line on exit and put the power down. Included in the set, that becomes available by mid-April, is the new chassis, the top deck and a chassis protector decal.

Source: Schelle Racing Innovations [schelleracing.com]

March 25, 2015

DE SpeedLine Plus 2.4 1/10th buggy wheels

The SpeedLine Plus 2.4 is the latest 1/10th buggy wheel from DE Racing. Offering a 2.4″ diameter, for the use with the latest generation of 1/10th buggy tyres, the wheel delivers maximum corner control and stability by utilising DE Racing’s “Sure Lock” foam retention system. This system, comprising of radial ribs that lock the wheel and foam insert together, retains maximum tyre traction to the racing surface while eliminating the vague inconsistencies that come from an insert that is free to move around on its wheel. The rims are available for Team Associated, Kyosho and TLR 1/10th buggies and in white, yellow or black colour.

Click here to view more photos