Red RC » Team Associated

June 12, 2014

RPM RC10 classic gear cover

RPM introduce this gear cover for the RC10, RC10 Classic and RC10T. Modelled after the 20+ years old original part, the 2014 variant features some improvements in design and functionality. First up are smoother contours and added clearance in several areas to make for an ever better fit while completely sealing the main gear and pinion from dust and debris. The cover also has a larger, taller area for bigger pinions than the stock gear cover and the spur area has been expanded to allow the use of the VTS slipper clutch from Associated. Coming in dyeable white colour for a nostalgic feel and including a soft gear cover plug for easy slipper nut access.

Source: RPM [rpmrcproducts.com]

June 10, 2014

Team Associated B5 series FT milled motor plates

Team Associated now have milled motor plates for the B5 and B5M buggy available. Being part of AE’s Factory Team line of accessories and option parts, the motor plates not only look cooler but are also light of weight while increasing the surface area for improved cooling at the same time. The plates fit both the rear motor B5 and the mid motor B5M and come in blue or black anodising.

Click here to view more photos

June 3, 2014

More STRC B5 & B5M aluminium option parts

ST Racing Concepts have more aluminium option parts for the Team Associated B5 and B5M buggy available. First up is the rear chassis brace/camber link mount for the rear motor B5. Cut from high-quality aluminium, the camber link mount also helps with adding a bit more weight to the rear of the buggy when conditions call for a tad more rear traction. The rear camber link mount is also available as a variant for the mid motor B5M and retains all factory suspension geometry and ball stud locations.

Click here to continue reading

May 30, 2014

Reflex Racing RSD7 keyed carbon fibre battery holder

Made for the RSD7 chassis for the Team Associated TC6.2 is this keyed carbon fibre battery holder system. Designed to work only with the RSD7 chassis, the mounting system will have the battery sitting a little bit further away from the belt than the TC6.2 in order to provide better balance and to generate more chassis roll. Included are three carbon fibre mounting brackets and all needed mounting hardware.

Click here to view a photo of the parts in place

May 29, 2014

Avid B5 shock standoffs & TLR22 Avert spring cups

Avid have new option parts for the Team Associated B5 and TLR22 series of vehicles available. First up is a pair of multi-piece shock bushings for the B5 and B5M buggies. They are a direct upgrade for the Associated parts and are made of black anodised 7075 aluminium and have a wide base to prevent bent shock mount screws. The Delrin pivot bushings can be replaced to help maintain a tight fit while two machined silver rings around the base add visual impact. The standoffs are sold as pairs and come including an Avid mini decal sheet. Also new are updated Avert aluminium spring cups for the TLR22 line of buggies and trucks. Offering heavy machining, the parts weight in at under a gram per piece while an angled slot design keeps the cups from popping off in a crash. The cups are machined from 6061-T6 aluminium, come black anodised and are sold in packs of four.

Click here to view the spring cups

May 28, 2014

STRC Team Associated B5 series option parts

STRC introduce the first in a line of option parts for the Team Associated B5 and B5M. First up is a 25 degree front aluminium bulkhead. The bulkhead increases the durability of the front end of the buggy while adding a bit of weight to the front of the buggy to help assist in tuning for more steering out of your buggy. The set-screw over hinge-pin design provides long life for the aluminium parts as the hinge-pin will not wear down the bulkhead over time.

Click here to continue reading

May 28, 2014

RSD TC6.2 RSD7 carbon fibre chassis

Available now from Reflex Racing is the RSD7 carbon fibre chassis for the Team Associated TC6.2 touring car. The shape of the chassis has been engineered so that the car can roll and pitch more naturally, increasing the traction and the steering of the TC6.2, which translates into more corner speed and stability. This is further assisted by the reduced width of only 85mm that has been chosen to promote more roll in the corners as well as allow to run a lower ride height when necessary. On top of that the battery position is pushed further back to increase corner entry steering. Other features include mounting holes for an optional and soon available motor mount and drilled holes underneath the front bellcranks allow easy access to the inverted bellcrank screws. Optional keyed-in carbon fibre battery holders are available separately.

Click here to view more photos

May 27, 2014

JConcepts RC10 Worlds Fin titanium turnbuckle set

JConcepts introduces a stylish, durable and lightweight alternative Titanium turnbuckle kit for the popular Team Associated RC10 Worlds Car vehicle. The base of the shafts design is centred around a .143″ titanium hex size which gradually tapers down into a 3mm thread base design which accepts standard JC and AE ball-cup configurations. The 8-piece set is produced with left and right hand threads with the left being conveniently marked for easy orientation.

Source: JConcepts [jconcepts.net]