Coming from Tekno RC are revised bulkheads for the EB410 1/10th 4WD buggy. With feedback from customers and team drivers the new bulkheads are of an updated design to reduce fatigue from extreme impacts. The TKR6519B Bulkhead Set is a direct replacement for TKR6519 and does not require additional parts or hardware.
Source: Tekno RC [teknorc.com]
Exotek have introduced a range of new option parts for the Tekno RC EB410 1/10th 4WD buggy in the form of rear locking hinge pins, heavy duty steel and brass suspension blocks as well as an aluminium steering rack. Starting with the rear hinge pins, the titanium locking/captured hinge pin set with 2mm hex head eliminates the problem of the rear hub hinge pins sliding out of the arms during impacts. The design securely holds the hinge pins and hubs in the rear arm, thanks to the captured pin and lock nut design.
DE Racing now have dedicated Speedline front wheels for the Tekno EB410 and TLR 22-4 1/10th scale 4WD buggies available. The are usable on both vehicles and sport the needed off-set to achieve the desired overall width. The dish wheels are available in fluorescent yellow, white and black colour and they come in sets of four.
Reds Racing have released their new clutch retainer kit for TLR and Tekno vehicles as well as heavy duty clutch bearings. Starting with the clutch retainer, the set includes an alloy steel washer and high-quality screw that allow to use the Reds Racing Durabell and Tetra clutch systems on TLR and Tekno RC kits. The set captures the bearing and clutch bell to keep everything in place, even in the event of a bearing failure. Also new are 5x13x4mm heavy duty metal-shielded clutch ball bearings. They are made in Japan and offer exceptional durability even in severe racing conditions.
RC Speed Secrets have introduced their new Next Level 6-hole Cheater shock pistons for the Tekno RC EB410 buggy. The CNC-machined delrin pistons are of a 2x 2.0 + 4x 0.9mm 6-hole design and they are made to offer more grip and a pillowy soft feel through the rough stuff, keeping the buggy’s tyres on the ground longer than stock pistons. They are recommended for the use in the rear with 1.7 front pistons and 450cSt to 475cSt oil all-round. The pistons come as pairs and are a direct fit on the EB410.
Source: RC Speed Secrets [rcspeedsecrets.com]
Coming from Avid is a carbon fibre battery brace for the Tekno RC Eb410 buggy. The part is made from 100 percent carbon fibre and designed for easy balance plug access no matter how it is installed. The brace works with stock or aftermarket hardware and is available separately or including a black aluminium thumbwheel.
Coming soon from Leadfinger Racing is the A2 Tactic body shell for the Tekno RC NB48.4 buggy. An evolution of the original Assassin design the lid offers a lower downforce thanks to a narrowed cab and less windshield rake. Bump outs for the fuel tank and throttle servo make for lots of clearance and lower side pods with added rails improve high speed handling while in addition the longer overall length aids against chassis flex damage. The body is made of thicker polycarbonate material for durability, it come clear, including window masks and it is available for pre-order now.
VRP have introduced a suspension droop gauge purpose-designed for the Tekno RC EB410 buggy. The tool does away with the need to use callipers to measure suspension droop, instead it slips over the top shock nut and the droop setting is easily readable on the black anodised ruler with white lettering. The USA-made tool is made from high-quality 7075 aluminium and is available now.
Source: VRP [visionracingproducts.com]
