Red RC » Tekno RC

December 29, 2017

Exotek EB410 rear brass weight set

Exotek have introduced a brass rear weight set for the Tekno EB410 buggy. Made of brass and black coated to reduce corrosion, this weight set is designed to easily bolt on to the rear of the EB410 with an extra low profile. The main weight is 40g and included are two add on 8g weights so that drivers can tune the rear weight of the buggy as needed. The weight set is also slightly angled off of the chassis to maintain chassis flex. Sold separately are additional 8g weights to add extra grams if needed.

View more images here

December 29, 2017

JConcepts MT410 protective overtray

Coming from JConcepts and made for the Tekno RC MT410 monster truck is a protective overtray. When racing or bashing on a loamy or top-soil dirt surface, the inside of the MT410 chassis can become loaded with dirt or debris which creates extra weight. With the overtray these worries are minimised as the accessory fits snug around the entire chassis structure while being attached along the sides of the chassis with hook and loop tape for easy access. The overtray is built with height to provide extra room for various electrical and battery configurations but is still low enough for a clean fit and installation. There is a slight opening at the front-end which manoeuvres around the steering assembly and top-deck and also an open rear-end to provide some natural air-flow in and out of the closure. The tray has large front and rear trim-able openings which can be detailed for air-in and escape. The overtray comes clear and untrimmed.

View more images here

December 14, 2017

Exotek roll out new EB410 optionals

Coming from Exotek and made for the Tekno RC EB410 buggy are a couple of new optional parts. First up is a machined heavy duty 81T spur gear and mounting plate set for the stock centre gear diff. The much stronger machined delrin spur gear reduces the chances of stripped gears and includes the machined 7075 mounting plate with hardware. The 2-piece design also makes for quick and easy spur gear changes as owners do not have to open the gear diff and remove the outdrive, or refill the oils. In addition the alloy mounting plate provides cooling of the diff fluid for more consistent diff action. A 81t spur gear is included and the alloy mount also works with Exotek’s optional 72T spur.

Continue reading here

December 7, 2017

Avid EB410 battery thumbwheel

Avid is the next company to introduce option parts for the Tekno EB410 buggy, a kit that has received a lot of attention lately. Coming is an aluminium battery thumbwheel as a direct replacement for the stock thumbwheel. An O-ring is included for easy installation and secure mounting, and the black anodised finish with silver edge details and laser-engraved markings let the item stand out.

Source: Avid [avidrc.com]

December 7, 2017

Tekno EB410 13.5 Performance Bundle package

Coming from MIP and made for the Tekno EB410 4WD buggy is the Pucks 13.5 Performance Bundle package. Designed for the growing 13.5T stock class, the set is an aluminium based drivetrain system that features an all-new redesigned 2-piece aluminium bi-metal bone and alloy steel yoke, two front 78mm bones and two rear 69mm bones as well as the name-giving 1.5 Pucks. The latter increase the longevity of the drive system by reducing the wear and tear between the pins of the bone and slots of the cups. In addition the set decreases the drivetrain’s overall rotating mass by 25 percent. The decrease in weight directly results in quicker acceleration, deceleration, and lower motor temps.

Source: MIP [miponline.com]

December 6, 2017

RCSS EB410 Next Level Cheater shock pistons

Coming from RC Speed Secrets and made for the Tekno RC EB410 buggy are the new 2x 1.7 + 2x 1.0 and 2x 1.6 + 2x 1.0 Next Level Cheater shock pistons. CNC-machined from high-quality Delrin material the pistons offer the 4-hole “Competition Hole” setup with two larger and two smaller holes for improved suspension performance and handling. The 1.7 pistons are best used in the front of the buggy while the smaller 1.6 variant excels in the rear of the EB410. The pistons come as pairs and they are available now.

View the 2x 1.6 + 2x 1.0 pistons here

December 5, 2017

Exotek roll out new EB410 alloy & carbon options

Coming from Exotek and made for the Tekno RC EB410 1/10th 4WD buggy are new aluminium and carbon fibre option parts. First up is a set of rear hubs machined from 7075 aluminium and matching the stock geometry. The hubs are of a heavy duty design for high-powered applications, they come in Tekno team colours and are machined a second time to ensure precise bearing fit.

Continue reading here

December 4, 2017

T-Works NB48.4 titanium turnbuckle set

Coming from T-Works and made for the Tekno RC NB48.4 buggy is a titanium turnbuckle set. Including a total of seven turnbuckles for the camber and steering links as well as a smaller one for the servo link, the set is made to replace the standard turnbuckles with high-quality 64 grade titanium links and it also includes 4mm and a 5mm turnbuckle wrenches.

Source: T-Works [rc-tworks.com]