Red RC » Tekno RC

September 23, 2016

Tekno 1/8th HRC rear hubs & universal driveshafts

Tekno have announced the addition of five new products to their lineup in the form of high roll centre rear hubs, front/rear universal driveshafts for the NT48.3 and ET48.3 truggies as well as three centre universal driveshafts to improve the consistency of the NB48.3 and NT48.3 driveline. Starting with the rear hubs, by lowering the hinge pin location compared to the stock rear hubs, Tekno have raised the rear roll centre in just the right place. The HRC variants increase on-power traction and stability while decreasing body roll. All of this with improved rotation into a corner and no compromise in on-power steering. To reduce wear and increase part lifespan, they are moulded from durable nylon and include locations for hinge pin set screws. The parts work both left and right, with CV or universal driveshafts and on all of Tekno’s 1/8th scale kits.

Continue reading here

September 23, 2016

IRD Tekno aluminium shock mounts

Iowa Research & Development have introduced aluminium shock mounts for the Tekno 1/8 scale series of vehicles. Made from aerospace 7075 aluminium, the parts were designed to lower the vehicle’s centre of gravity for improved performance. Optimised for performance and weight the mounts weigh 5.6g per set of four, saving 9g at the highest position on the suspension.

Source: Raceday Hobbies [racedayhobbies.com]

September 15, 2016

JConcepts S1 EB48.3 buggy bodyshell

Coming from JConcepts and made for the Tekno EB48.3 buggy is the new Silencer bodyshell. The body has new elements created for fast and rough terrain driving; the cab is placed in a forward position with a medium rake angle for an aggressive driving feel without sacrificing out-right balance. The forward pods have the necessary height for high capacity batteries with an added scoop, built for cooling access from a forward position. The rear of the pods are built up and include a rear winglet which drops some force on the rear tires. The mid-length cab incorporates a one-piece side window layout and includes a long shark fin off the rear of the cab for side-traction and straight-line tracking ability. At the rear of the cab rest several areas which can be trimmed for air-flow and hot air escape. Just behind the motor area, another escape pocket has been added for increased passage for flow while everything exits the rear in the scoop-like fashion. The sides of the body have a unique step treatment which adds some strength and also a fitted change of direction forming around the chassis side-guards. The Silencer is formed in clear polycarbonate material with protective film and each package includes window mask and detailed decal sheet.

View more images here

August 19, 2016

Tekno introduce revised SCT410 bumper & shock parts

Coming from Tekno RC are a revised SCT410 bumper as well as revised shock parts. Starting with the bumper, the front skid plate has returned to the SCT410 bumper by popular demand. This change brings increased durability and chassis protection to the front of the truck. For those that would prefer the added ground clearance, the skid can be easily removed. The part is fully compatible with all generations of the SCT410 and requires one M3x8mm cap head screw and two M4x15mm flat head screws.

Continue reading here

July 29, 2016

Tekno RC offers revised Delrin shock cartridge set

Tekno RC have announced the release of a revised shock cartridge set that further improves efficiency and performance the company’s shock absorbers. The shock cartridge set, with the part number TKR6146B has been revised from TKR6146 by reducing the height of the bottom guide to allow additional up-travel. This results in better bump handling and jump landing. Centre and top guides remain the same. Tekno RC recommends using the new cartridges with the EB48.3 and NB48.3 for increased up-travel and improved rough track handling. The standard TKR6146 set will continue to have the extended lower shock guide and is recommended for the ET48.3 and NT48.3 for increased shock shaft support.

Source: Tekno RC [teknorc.com]

July 12, 2016

Tekno introduce new differential outdrives

Tekno have introduced new lightweight differential outdrives for their line of 1/8th scale vehicles. The outdrives, usable at the front and rear of the cars, feature a revised design and they are made using a different steel alloy material and new heat treatment process to extend life and improve consistency. The parts come in packs of two and they are compatible with all EB/NB48 and ET/NT48 vehicles.

Source: Tekno [teknorc.com]

May 27, 2016

Tekno RC ROAR/IFMAR-legal high downforce wing

Tekno RC have updated their high downforce wing that features new smaller side dams which are now ROAR/IFMAR legal and hole guides for reducing downforce or tuning the wing in high wind conditions. The wing is available in the three colours of black, yellow and white.

View more images here

May 20, 2016

Tekno RC Stripe hoodies

Tekno RC have introduced two new hoodies to add to their clothing collection. The pullover and zipper hoodies feature Tekno RC’s new Stripe logo up front and the new “T” star logo in the back. They are 80 percent cotton, 20 percent polyester and the printing is done with a special fade resistant ink that makes the printing feel soft, almost as if it’s part of the fabric itself. They are available in black and are sold in sizes of S to XXXL.

View more images here