Red RC » Tekno RC

July 2, 2014

FTW NB48 Reactor bodyshell

FTW introduce the Reactor bodyshell for the Tekno NB48 1/8th nitro off-road buggy. Offering a somewhat “edgy” design that highly separates from both the original and many other after market bodies, the Reactor is usable with stock or Losi 8ight series air filters and the body offers two trim lines for the cooling head for forward and rear motor configuration. The body is moulded from .040 polycarbonate and comes with window masks and a logo decal sheet.

Click here to view another photo

June 19, 2014

Pro-Line EB48.2 Phantom bodyshell

Following the Phantom body for Mugen’s MBX-7 buggy, Pro-Line now also introduce a respective variant for the Tekno RC EB48.2 E-Buggy. Making use of the unique Phantom design, the body sports an edgy cab forward cockpit design and flowing lines that meet in a point in front of the rear shock tower to make for a one of a kind look. An add-on rear fin helps to stabilise the buggy during highspeed runs and once being airborne. As usual the body comes clear and including window masks.

Click here to view more photos

May 24, 2014

Pro-Line EB48.2 Phantom bodyshell – Sneak peek

Pro-Line soon have a Phantom design bodyshell for the Tekno RC EB48.2 1/8th E-buggy available. Making use of the distinctive Phantom design, that was first introduced for 1/10th scale buggies, the body features a Stealth Fighter-ish cabin, edged sidepods and a rear section with an optional rear fin for improved airflow towards the rear wing. All information about the body and a release date will be available soon.

Source: Pro-Line [prolineracing.com]

May 7, 2014

Tekno RC aluminium gear diff cross pins

Tekno introduce the new aluminium differential cross pins for the use in the company’s 1/8th scale vehicles as well as the SCT410. The cross pins are lighter than the stock parts and reduce the rotating mass in the differentials by 6.3 grams which results in faster acceleration and improved efficiency. The pins are machined from 7075 aluminium and hard-anodised for best wear characteristics. The pins are sold in packs of six allowing for replacement of all three differentials at the same time.

Source: Tekno RC [teknorc.com]

April 21, 2014

Tekno RC shock cap bushings

Tekno RC announce the release of their shock cap bushings as a separate item. The company has received many requests from their customers to offer the parts as a stand-alone items and the bushings are available in a convenient 4-piece pack. The bushings are compatible with all Tekno RC vehicles such as the EB48.2, NB48, ET48, NT48 and SCT410.

Source: Tekno RC [teknorc.com]

February 5, 2014

Tekno RC NT48 & ET48 TiNi rear shock shafts

Tekno RC announce new TiNi-coated rear shock shafts for the NT48 nitro truggy and ET48 electric truggy. The shafts feature a Titanium-Nitride coating to ensure the smoothest operation in any condition. The surface treatment also provides improved strength and surface properties that allow the shaft to travel with less friction through the shock unit. The result is improved jump landing, bump handling and better consistency throughout a race. The shafts are sold in pairs and are available now.

Source: Tekno [teknorc.com]

January 24, 2014

Tekno RC signs Curtis Door

Tekno RC announce that Curtis Door has signed on for the 2014 season. Along with an incredible driving talent, Curtis brings a wealth of setup knowledge and dedication to the RC industry. Curtis will be running the full line of Tekno RC nitro and electric vehicles in the upcoming season. He’s been tearing it up lately in the Northern California region against some well known pro competition, taking down a couple TQ’s and wins at recent events.

Source: Tekno [teknorc.com]

January 14, 2014

Tekno shock springs & sway bars

Tekno RC have new 1/8th shock springs as well as optional sway bars for the ET48 and NT48 truck available. Starting with the silver colour springs, they come as separate 80mm front and 90mm rear parts, are made from 1.6mm spring steel and are available as 7.5T to 9.0T front and 9.0T to 10.5T rear variant in four colour-coded hardnesses each. Also new and made for the ET48 and NT48 1/8th truggies are several sway bar wires. Coming as 2.3mm to 3.0mm variant the sway bars help to adjust the chassis roll to your liking and they are laser-etched for easy identification.

Click here to view the swaybars